Tiger Woods 2019 Taylormade Irons...P7TW?

[dconcepd]

TM and TW product ho’s will buy these regardless of price point..

 

No doubt lol

[TheMoneyShot]

Brutal Neck injury out of Bay Hill

 

I don’t think it’s anything serious. Just a precautionary measure. Smart move by TW, bring on Augusta..

[taylorx300]

5/1 release date on these

[mBiden2]

5/1 release date on these

 

Any price yet? I know someone said 2k

[taylorx300]

Correct - 1999.99 3-PW

[mBiden2]

Correct - 1999.99 3-PW

 

Did you get a chance to see them? Or hold them?

[dconcepd]

Correct - 1999.99 3-PW

 

100% milled? Or forged and finishing touches milled??

[jll62]

Correct - 1999.99 3-PW

 

100% milled? Or forged and finishing touches milled??

 

Tiger and Tommy's both say Milled Grind. Have to assume it's just the sole and the channel in the back that's milled.

[leftygolfer15]

Correct - 1999.99 3-PW

 

100% milled? Or forged and finishing touches milled??

 

Zero chance they will be 100% milled. Just the sole I’m sure, same as the wedges.

[TG_343]

lefty release? :cheesy: :cheesy: :cheesy:

[TheMoneyShot]

Correct - 1999.99 3-PW

 

My pricing guess was spot on. LE or a full blown release?

[dconcepd]

Correct - 1999.99 3-PW

 

My gues was spot on. LE or a full blown release?

 

I called TM today. And was told May-June release. Final price hasn’t been announced yet but expect 2k plus. And this is a watered down version of what TW and Fleetwood currently play. These will not be forged with only the sole and channel on the back being milked as stated above.. these clubs will be 100% milled

[TheMoneyShot]

Correct - 1999.99 3-PW

 

My gues was spot on. LE or a full blown release?

 

I called TM today. And was told May-June release. Final price hasn’t been announced yet but expect 2k plus. And this is a watered down version of what TW and Fleetwood currently play. These will not be forged with only the sole and channel on the back being milked as stated above.. these clubs will be 100% milled

 

I’m still going to pull the trigger on a set. I’m glad TM listened and delivered.

[bladehunter]

“ these clubs will be a 100% milled “. Is this a true statement ??????

[Downtown_Brown_41]

Time to build up the PayPal in preparation

[redrage22]

Hit them today. 7 iron with the tour issue s400 shaft. Rep had them in hand. I only got 3 swings in but man they were smooth! Sole was all milled. Perfect sound and feel. Also got to see Spider Mini with the bronze paint scheme and updated insert.

[jonn443]

Correct - 1999.99 3-PW

 

My gues was spot on. LE or a full blown release?

 

I called TM today. And was told May-June release. Final price hasn’t been announced yet but expect 2k plus. And this is a watered down version of what TW and Fleetwood currently play. These will not be forged with only the sole and channel on the back being milked as stated above.. these clubs will be 100% milled

 

Again, they can't just take a good thing and leave it alone. Too hard to just forge the identical club head and send it to the the store.

 

"Watered down"= W E A K ($1,500 Max)

 

(Definitely not worth $2K plus, go get a Forged iron with National Custom for around the same price and a hell lot more value)

[bladehunter]

I’m confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

[Jagpilotohio]

I’m confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

 

Oh brother! That’s funny. You were reading my mind.

 

So many people don’t even understand the different terminology and the variety of potential processes involved. The club could easily be a forged head that is finished via milling. If it’s a cast head that’s finished via milling I can’t imagine having the giant testicles needed to try and offer that Schite for $2000. All speculation at this point.

 

Hopefully no ones head explodes reading this thread.

[dconcepd]

Im confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

 

Oh brother! Thats funny. You were reading my mind.

 

So many people dont even understand the different terminology and the variety of potential processes involved. The club could easily be a forged head that is finished via milling. If its a cast head thats finished via milling I cant imagine having the giant testicles needed to try and offer that Schite for $2000. All speculation at this point.

 

Hopefully no ones head explodes reading this thread.

 

Don’t shoot the messenger.. lol I’m simply passing the info I got from “josh” (TM CSR REP) he said 100% milled head. Obviously MT won’t be partaking in a retail TM product.. so to be clear those of you hoping to have something from Artisan stamped with TM that is not what you are getting..

 

Additionally josh said” We have not been given a spec sheet on them yet. I’m only delaying why I’ve been told in meetings.” So like mentioned above; we are all speculating at this point..

[bladehunter]

I only ask because the geek in me loved the truly fully milled apex mb that Rory hit with callaway before going to TM.

[Jagpilotohio]

Im confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

 

Oh brother! Thats funny. You were reading my mind.

 

So many people dont even understand the different terminology and the variety of potential processes involved. The club could easily be a forged head that is finished via milling. If its a cast head thats finished via milling I cant imagine having the giant testicles needed to try and offer that Schite for $2000. All speculation at this point.

 

Hopefully no ones head explodes reading this thread.

 

Don’t shoot the messenger.. lol I’m simply passing the info I got from “josh” (TM CSR REP) he said 100% milled head. Obviously MT won’t be partaking in a retail TM product.. so to be clear those of you hoping to have something from Artisan stamped with TM that is not what you are getting..

 

Additionally josh said” We have not been given a spec sheet on them yet. I’m only delaying why I’ve been told in meetings.” So like mentioned above; we are all speculating at this point..

 

You’re missing my point.

 

A club can be “100% milled” out of a cast unfinished head or a forged unfinished head. The rep doesn’t really know what he’s talking about.

 

...and that would not be the first or the last time. I find quite often that when I call a CS rep They actually know shockingly little about golf clubs in general. It’s actually almost terrifying.

[Ty_Webb]

I’m confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

 

Oh brother! That’s funny. You were reading my mind.

 

So many people don’t even understand the different terminology and the variety of potential processes involved. The club could easily be a forged head that is finished via milling. If it’s a cast head that’s finished via milling I can’t imagine having the giant testicles needed to try and offer that Schite for $2000. All speculation at this point.

 

Hopefully no ones head explodes reading this thread.

 

Don’t shoot the messenger.. lol I’m simply passing the info I got from “josh” (TM CSR REP) he said 100% milled head. Obviously MT won’t be partaking in a retail TM product.. so to be clear those of you hoping to have something from Artisan stamped with TM that is not what you are getting..

 

Additionally josh said” We have not been given a spec sheet on them yet. I’m only delaying why I’ve been told in meetings.” So like mentioned above; we are all speculating at this point..

 

You’re missing my point.

 

A club can be “100% milled” out of a cast unfinished head or a forged unfinished head. The rep doesn’t really know what he’s talking about.

 

...and that would not be the first or the last time. I find quite often that when I call a CS rep They actually know shockingly little about golf clubs in general. It’s actually almost terrifying.

 

If it is 100% milled out of a forged unfinished head, why on earth would they need to water it down any? Interest deflating...

[Jagpilotohio]

I’m confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

 

Oh brother! That’s funny. You were reading my mind.

 

So many people don’t even understand the different terminology and the variety of potential processes involved. The club could easily be a forged head that is finished via milling. If it’s a cast head that’s finished via milling I can’t imagine having the giant testicles needed to try and offer that Schite for $2000. All speculation at this point.

 

Hopefully no ones head explodes reading this thread.

 

Don’t shoot the messenger.. lol I’m simply passing the info I got from “josh” (TM CSR REP) he said 100% milled head. Obviously MT won’t be partaking in a retail TM product.. so to be clear those of you hoping to have something from Artisan stamped with TM that is not what you are getting..

 

Additionally josh said” We have not been given a spec sheet on them yet. I’m only delaying why I’ve been told in meetings.” So like mentioned above; we are all speculating at this point..

 

You’re missing my point.

 

A club can be “100% milled” out of a cast unfinished head or a forged unfinished head. The rep doesn’t really know what he’s talking about.

 

...and that would not be the first or the last time. I find quite often that when I call a CS rep They actually know shockingly little about golf clubs in general. It’s actually almost terrifying.

 

If it is 100% milled out of a forged unfinished head, why on earth would they need to water it down any? Interest deflating...

 

Yes, there absolutely nothing wrong with using precise computer milling to finish a rough forging. Does anyone have a problem with Scotty milling a forged block of German stainless steel into a putter? Of course not. There is nothing inherently wrong with milling.

 

I’m guessing if the terminology used is “it’s a watered down version” of Tigers and Fleetwoods, then what they mean is they are using a cast head and finishing the shaping and detail work using computer milling.

 

If they try and charge $2000 for a cast head finished by milling, that is going to turn off nearly every serious club Ho. I can’t believe many on this thread would go for that.

[jwfgolfpro]

Correct - 1999.99 3-PW

 

My pricing guess was spot on. LE or a full blown release?

 

Limited Edition release.

JWF

[jwfgolfpro]

I'm confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

 

Forged and milled grind.

JWF

[Mabyboi]

I'm confused. Are we saying fully milled cast ? Forged and milled grind ? Or cast and milled grind ? Or forged and fully milled ? Who the heck is on first ???

 

Forged and milled grind.

JWF

 

This would be the best possible scenario? Excuse my lack of knowledge.

[cota0429]

Hopefully not the same forging with the 730s. They didn’t feel good to me at all. If they are limited release, wonder how many sets.

[TheMoneyShot]

Correct - 1999.99 3-PW

 

My pricing guess was spot on. LE or a full blown release?

 

Limited Edition release.

JWF

 

If true, bad move by TM imo...

[mBiden2]

I wonder if you’ll only be able to get them 3-pw or if you’ll be able to custom order them. I’d give them a shot 7-pw but my game isn’t close to good enough anymore to play blade long irons