Nike Vapor Iron Series

[ladahl]

[quote name='linkerpan' timestamp='1417831818' post='10550681']
Santa just came! I just don't know how long is going to take me to learn to hit these blades compared to my Fourteens GI.
[/quote]

Look good Marzo,

But what in the hell do I spy?!!! Iron covers?!!!!

[leftypga]

[quote name='ladahl' timestamp='1417868840' post='10551823'][quote name='youngunz5840' timestamp='1417837756' post='10551075']
I talked to nike today about my 2 iron and they said they are waiting for a 2 degree upright head and it won't be until 1/21 so they are going to build a standard spec and ship it monday and I'll have it bent
[/quote]

His seems really odd. Wouldn't they bend it for you a simple 2*?[/quote]

They actually have 2 flat, std, and 2 up heads. Most manufacturers do this. That way they can go +-4 degrees with no risk of breakage

[linkerpan]

[quote name='ladahl' timestamp='1417868974' post='10551831']
[quote name='linkerpan' timestamp='1417831818' post='10550681']
Santa just came! I just don't know how long is going to take me to learn to hit these blades compared to my Fourteens GI.
[/quote]

Look good Marzo,

But what in the hell do I spy?!!! Iron covers?!!!!
[/quote]
I "excused" myself as I'm traveling today to Phoenix, and "don't want the PVD off before I get there", LOL

[sierra007]

Nike Vapor Iron Series Pro?

 

what your mean is this iron golf?

http://www.amazon.com/Nike-Vapor-Iron-Golf-3-PW/dp/B00P1QEKEK

[linkerpan]

Nike Vapor Iron Series Pro?

 

what your mean is this iron golf?

http://www.amazon.com/Nike-Vapor-Iron-Golf-3-PW/dp/B00P1QEKEK

 

I see the store is Fairway Golf that is one of this forum sponsors. Will try to contact them directly as they have coupons and discounts for WRXs.

[NGstaff]

Freshly gripped and ready to go. Now if it would stop pouring outside I would be happy.[attachment=2524653:ImageUploadedByGolfWRX Mobile1417877773.289833.jpg][attachment=2524655:ImageUploadedByGolfWRX Mobile1417877785.673907.jpg]

[Pure745]

Forgot to post this in here a while back when this came in, the VPC 2 iron has been really good! Goes a little further than the 712u, a bit easier off the deck, feels more like a CB vs. the driving iron feel the 712 has.. overall, a great club!

 

[SC-TX 88]

Forgot to post this in here a while back when this came in, the VPC 2 iron has been really good! Goes a little further than the 712u, a bit easier off the deck, feels more like a CB vs. the driving iron feel the 712 has.. overall, a great club!

 

 

Tai every time you post in this thread my bank account balance goes down. Seriously though, thanks for all the awesome pictures and reviews. After the holidays in going to have to get fitted into some new nike sticks.

[youngunz5840]

[quote name='ladahl' timestamp='1417868840' post='10551823']
[quote name='youngunz5840' timestamp='1417837756' post='10551075']
I talked to nike today about my 2 iron and they said they are waiting for a 2 degree upright head and it won't be until 1/21 so they are going to build a standard spec and ship it monday and I'll have it bent
[/quote]

His seems really odd. Wouldn't they bend it for you a simple 2*?
[/quote]
I thought the same but they explain that they don't like to bend it more than 2* and I need 3* so they nory just bend a 2* upright one degree. I mainly hit my 2 off the tee and I know some people who can bend the club easily for me

[sbjinx]

[quote name='1david5' timestamp='1417846933' post='10551485']
[quote name='sbjinx' timestamp='1417836887' post='10551047']
I know one of the members had an issue with a pre production set where the black PVC was coming off. Anyone else have this problem? I got my set about a month ago and have 4 rounds plus some range time. I use a push cart so I get minimal chatter but the black PVC on the 7 iron is starting to come off.

It's weird because it's only the 7 iron. The other clubs have dings and knicks but the black PVC is fine (when I look closely I can see the marks in the PVC but it's not coming off). I wonder if the 7 iron alone was the pre production set and somehow got mixed in the set.

It's not that bad but I can clearly tell that the PVC applied on the 7 iron is not the same as the others. Anyways wanted to see if anyone else was seeing something similar cause I thought it was weird that it's only on one club.

[attachment=2524291:ImageUploadedByGolfWRX Mobile1417836446.858898.jpg]
[/quote]

EXACT same thing happenning to my 6 iron. And only the 6 iron...No explanation for it
[url="http://www.golfwrx.com/forums/topic/1101311-vapor-pro-combo-vs-i20/page__st__30"]http://www.golfwrx.c...20/page__st__30[/url]
[/quote]

Weird...did you contract Nike about it or just go with it

[linkerpan]

Quick trip to fitter shows lie angles where as specified but heads came 1 or 1.5 degrees off.

[1david5]

[quote name='sbjinx' timestamp='1417887517' post='10552809']
[quote name='1david5' timestamp='1417846933' post='10551485']
[quote name='sbjinx' timestamp='1417836887' post='10551047']
I know one of the members had an issue with a pre production set where the black PVC was coming off. Anyone else have this problem? I got my set about a month ago and have 4 rounds plus some range time. I use a push cart so I get minimal chatter but the black PVC on the 7 iron is starting to come off.

It's weird because it's only the 7 iron. The other clubs have dings and knicks but the black PVC is fine (when I look closely I can see the marks in the PVC but it's not coming off). I wonder if the 7 iron alone was the pre production set and somehow got mixed in the set.

It's not that bad but I can clearly tell that the PVC applied on the 7 iron is not the same as the others. Anyways wanted to see if anyone else was seeing something similar cause I thought it was weird that it's only on one club.

[attachment=2524291:ImageUploadedByGolfWRX Mobile1417836446.858898.jpg]
[/quote]

EXACT same thing happenning to my 6 iron. And only the 6 iron...No explanation for it
[url="http://www.golfwrx.com/forums/topic/1101311-vapor-pro-combo-vs-i20/page__st__30"]http://www.golfwrx.c...20/page__st__30[/url]
[/quote]

Weird...did you contract Nike about it or just go with it
[/quote]

Hasn't got any worse so I'm just keeping an eye on it. Since mine are shafted with Recoil Prototypes it's not a simple matter even if they offer to replace it.

[leftypga]

[quote name='linkerpan' timestamp='1417889341' post='10552941']Quick trip to fitter shows lie angles where as specified but heads came 1 or 1.5 degrees off.[/quote]

In loft?

[linkerpan]

Sorry, yes, in loft. So not a bad idea to check. I happened also with my Scotty, that came way off spec.

[csiachos]

Forgot to post this in here a while back when this came in, the VPC 2 iron has been really good! Goes a little further than the 712u, a bit easier off the deck, feels more like a CB vs. the driving iron feel the 712 has.. overall, a great club!

 

 

Tai every time you post in this thread my bank account balance goes down. Seriously though, thanks for all the awesome pictures and reviews. After the holidays in going to have to get fitted into some new nike sticks.

did u take out the volt paint fill

[leftypga]

[quote name='linkerpan' timestamp='1417901985' post='10553743']Sorry, yes, in loft. So not a bad idea to check. I happened also with my Scotty, that came way off spec.[/quote]

That's why I always check my clubs when they come in. The new Titleist MB's I got came in all over the place too. Swing weights were also off. I'm hoping nike does a better job. I don't want to have to tear a second set apart and start from scratch twice in as many weeks.

[Lefty_13]

Went ahead and bit the bullet. Switching from my AP2's and ordered a full lefty set of Pro's 4-PW with Project X 6.0's. Really excited to see how these perform compared to my Titleist's.

[SC-TX 88]

[quote name='Lefty_13' timestamp='1417964683' post='10557059']
Went ahead and bit the bullet. Switching from my AP2's and ordered a full lefty set of Pro's 4-PW with Project X 6.0's. Really excited to see how these perform compared to my Titleist's.
[/quote]

Looking forward to hearing your thoughts. Playing the AP2s now and considering a change in the new year.

[Lucho8]

Does anyone know if you can order single irons from Nike instead of buying a full set? I been playing a minimalist set with great success for the past year and would like to keep it that way. Thanks!

[shakey]

[quote name='Lucho8' timestamp='1417982242' post='10558237']Does anyone know if you can order single irons from Nike instead of buying a full set? I been playing a minimalist set with great success for the past year and would like to keep it that way. Thanks![/quote]
You can order what you want. I only ordered 5-PW. I've ordered less for customers (7-PW).

[Lefty_13]

[quote name='SC-TX 88' timestamp='1417970209' post='10557451']
[quote name='Lefty_13' timestamp='1417964683' post='10557059']
Went ahead and bit the bullet. Switching from my AP2's and ordered a full lefty set of Pro's 4-PW with Project X 6.0's. Really excited to see how these perform compared to my Titleist's.
[/quote]

Looking forward to hearing your thoughts. Playing the AP2s now and considering a change in the new year.
[/quote]

Will definitely report some feedback

[JMO TO]

Forgot to post this in here a while back when this came in, the VPC 2 iron has been really good! Goes a little further than the 712u, a bit easier off the deck, feels more like a CB vs. the driving iron feel the 712 has.. overall, a great club!

 

Tai - Do you know what the blade length is on the VPC long irons? I'm looking to replace my Rocketblade 3 and 4 irons but want to find something with a similar size to my Bridgestone DPCs.

[tylernim]

Forgot to post this in here a while back when this came in, the VPC 2 iron has been really good! Goes a little further than the 712u, a bit easier off the deck, feels more like a CB vs. the driving iron feel the 712 has.. overall, a great club!

 

Tai - Do you know what the blade length is on the VPC long irons? I'm looking to replace my Rocketblade 3 and 4 irons but want to find something with a similar size to my Bridgestone DPCs.

 

I could be wrong but I played DPC long irons for a little while and was fooling around with the VPC yesterday at PGA superstore...the VPC are going to be quite a bit more squat.

[Lucho8]

[quote name='shakey' timestamp='1417983604' post='10558337']
[quote name='Lucho8' timestamp='1417982242' post='10558237']Does anyone know if you can order single irons from Nike instead of buying a full set? I been playing a minimalist set with great success for the past year and would like to keep it that way. Thanks![/quote]
You can order what you want. I only ordered 5-PW. I've ordered less for customers (7-PW).
[/quote]

Thanks Shakey!

[Pure745]

[quote name='JMO TO' timestamp='1417984981' post='10558439']
Tai - Do you know what the blade length is on the VPC long irons? I'm looking to replace my Rocketblade 3 and 4 irons but want to find something with a similar size to my Bridgestone DPCs.
[/quote]

I can measure later, but I've got Christmas party madness tonight and am leaving out of town tomorrow. But I'll try to get you measurements sometime before then.

[Lesmond]

4 iron about 206 yards out, par 3. Barely made the green with a toe shot. Thank you forgiveness.

[attachment=2526575:ImageUploadedByGolfWRX Mobile1417997128.683372.jpg]

[linkerpan]

All I can say is that looks the hype is for real. After 8 weeks without playing in good golfing conditions, and more than 4 weeks without swinging a club, I didn't have a single shot with the irons that disappointed me (woods were another story).
Plus coming from MP59 to these blades, I think the Vapor Pro are more forgiving. Was not perfect as I was trying different shots practice round type, from fairway and rough. Distance wise, I had no change, but I think was due to me being cautious using new clubs. [attachment=2526795:ImageUploadedByGolfWRX Mobile1418002291.856004.jpg]
When you play TPC Stadium there is only one shot that count, the par 3 16th. In the picture hope you can see it 10 ft from the flag. So accuracy was not the issue this time!

[JMO TO]

[quote name='Pure745' timestamp='1417992844' post='10558931']
[quote name='JMO TO' timestamp='1417984981' post='10558439']
Tai - Do you know what the blade length is on the VPC long irons? I'm looking to replace my Rocketblade 3 and 4 irons but want to find something with a similar size to my Bridgestone DPCs.
[/quote]

I can measure later, but I've got Christmas party madness tonight and am leaving out of town tomorrow. But I'll try to get you measurements sometime before then.
[/quote] No rush or worries. I may just take my 5i into Golftown and compare tomorrow.

[todd.ashford]

[quote name='Lucho8' timestamp='1417982242' post='10558237']
Does anyone know if you can order single irons from Nike instead of buying a full set? I been playing a minimalist set with great success for the past year and would like to keep it that way. Thanks!
[/quote]

You can order single irons right from our sponsor fairway golf's website and select which shaft you want. Or you can always email discount dan's and ask them for exactly what you want.

[Lesmond]

[quote name='Lucho8' timestamp='1417982242' post='10558237']
Does anyone know if you can order single irons from Nike instead of buying a full set? I been playing a minimalist set with great success for the past year and would like to keep it that way. Thanks!
[/quote]

Of course, I only ordered three. I am sure every OEM can get you how many irons you need. Just go to a store and place an order.