Titleist 2023 irons

[gvogel]

34 minutes ago, MSwen23 said:

 

Per my fitter yesterday, the CB will be no more in the future...

Titleist has Tour players playing the CB.  Would they move to T100?  I find that hard to believe.

[odshot68]

Just called titleist and the cb are NOT being discontinued. Perhaps next spring their is a replacement for the MB and CB irons but still available. 

[Aggielefty]

Did we get confirmation that the shaft matrix is staying the same? Any new additions?

[Carolina Golfer 2]

4 hours ago, FiveByEagle said:

 

Thanks much for the T350 post! Hearing that they are much better feeling than the 300's will likely make me wait for them.

 

Now just to decide the wedge gapping.... hmm.

Yeah, just played 18 this morning and no doubt sound and feel much better.   I may have had a bit of adrenaline flowing yesterday on that 3 hole loop I went on as, I wasn't a club and half longer today.  More  like very similar distance to the 2021 to 1/2 club at most.  Now there was a slight 10 mph breeze into us most of the day.   But for example one hole I hit 7 iron last night to about 155, today I hit 8 iron to a 140 yard pin and was a good 10 yards short.  

 

As for gapping, I may need to do something there, as I go from the set 43 to my Vokey 48 then 54 and 59.  But I've been hitting my 48 too far the past few rounds, it's getting closer to my 43 P.   I could have it bent to 49 or just get a 50 and figure out the distances between the P and 50 then. 

 

 

[Carolina Golfer 2]

4 hours ago, madaboutgolf said:

thanks for pics and instagram , can you tell me pw loft please ?

I didn't get to keep the spec sheet, but from the best I recall they are the same as the T300, so I think that means 29 for the 7 iron and 23 for the 5. 

 

2 hours ago, PickItUpGolf said:

Question for @Carolina Golfer 2 and anyone else with the 350s... would you say they are a direct replacement to the t300? Or are they more of a diffent product?

 

I realize that may sound like a dumb question, but want to know your thoughts.

 

 

I'd definitely say a direct replacement for the T300.  There was some speculation early in this thread that they may lean more toward the T400.   They are in no way close to a T400.   Other than the Hollow Club head look, not much of a change at al from specs of the T300 from what I can tell. 

 

1 hour ago, gvogel said:

Are the lofts the same as the T300?

 

They look good from the back.  Can't tell yet from address.

Yes, lofts are the same from what I saw. 

 

From address they are very very similar to the T300.  I thought slightly smaller, I had one person say they think slightly larger.  So that probably means the same 🙂

 

[madaboutgolf]

thanks for the info

[PickItUpGolf]

Thanks for the reply @Carolina Golfer 2!

I'm currently playing T300s, and like them , but after playing with some Mizuno Tours (I shouldn't but love the feel), and testing the Srixon ZX5s, I was kinda looking for something with more "feel", knowing the T350 is more of a direct replacement makes me think I should wait and see what these are like, maybe do a T200/T300 combo. I nearly went t200 in my fitting, but just couldn't get past the letter box/plastic back unfortunately, as much as I liked them.

[Wayside]

I could see why Titleist might drop the CB, as the T100 is just a slight cavity. It’s nothing like the original T100. I don’t know if there’s any tech in the hidden in the ‘muscle’ of the new ones, but if not, there’s not really a lot of cavity. It’s basically a blade with a scoop out of the thinner part of the head. Would blend well with MBs. 
 

As I am not of the standard to be using clubs like that any more, I sincerely hope the T150 has a large undercut slot cavity, much tungsten, and anything else they can chuck at it. 

Edited July 13, 2023 by Wayside

[Carolina Golfer 2]

1 hour ago, PickItUpGolf said:

Thanks for the reply @Carolina Golfer 2!

I'm currently playing T300s, and like them , but after playing with some Mizuno Tours (I shouldn't but love the feel), and testing the Srixon ZX5s, I was kinda looking for something with more "feel", knowing the T350 is more of a direct replacement makes me think I should wait and see what these are like, maybe do a T200/T300 combo. I nearly went t200 in my fitting, but just couldn't get past the letter box/plastic back unfortunately, as much as I liked them.

I hear you on the T200. I had those thst I was playing actually more than the T300. Until I saw the new line previewed back in May and sold the T209 knowing I would end up playing one of the new models.   
 

I said it in other posts but anyone turned off by the polymer feel and sound of the old T200 will love the new ones. 

[Cstobaugh]

Sorry if I missed earlier. Lots of comments! Can anyone compare this version T100 to the previous generation? Particularly the feel.

[goudok]

14 minutes ago, Cstobaugh said:

Sorry if I missed earlier. Lots of comments! Can anyone compare this version T100 to the previous generation? Particularly the feel.

Ya this.  It's weird how most of the thread is about T350, I thought everyone uses blades on wrx.

[ccantine8]

Mine are coming 7/18/23. I can’t wait. Are anyone else’s coming this early. The rep that fit me said to expect them around august 20.

[NZ315]

I want to just blind order the T150 with the shaft I got n my T100S but I might just have to wait until July 25 when they come to my course to test. The suspense is killing me!!! So close

[Carolina Golfer 2]

1 hour ago, goudok said:

Ya this.  It's weird how most of the thread is about T350, I thought everyone uses blades on wrx.

Actually I think I’m the only one of the early staffers who has the 350. I just post a lot  so it seems like everyone.  😬
 

 

[ehmora]

1 hour ago, ccantine8 said:

Mine are coming 7/18/23. I can’t wait. Are anyone else’s coming this early. The rep that fit me said to expect them around august 20.

 

When did you place your order? 

 

My fitting/order was today and they mentioned it might not get started until Aug 3rd but I'm hopeful they are wrong!

[mtnbiker5]

No More cb!!!???   Wait what!????   Why!!!?  That club is iconic 

[odshot68]

27 minutes ago, mtnbiker5 said:

No More cb!!!???   Wait what!????   Why!!!?  That club is iconic 

Not the case

[GC70]

1 hour ago, ehmora said:

 

When did you place your order? 

 

My fitting/order was today and they mentioned it might not get started until Aug 3rd but I'm hopeful they are wrong!

How’d go?

[Steelhead]

On 7/12/2023 at 1:21 PM, Carolina Golfer 2 said:

So had them out for 3 hole loop.  Only hit  all but the 8 iron.   
 

Couple quick a observation.  These feel a bit heavier than my T300 with Recoil 95. But those were 1/4 long and these are 1/2 

 

The feel is just incredible.  Every shot felt like a forged shot.  Yes it’s a face only forged but that and the milling made them feel and sound very good. 
 

Two biggest things.  At least for these 3 holes they were a good 1.5 clubs longer than the T300 I hit into anc with a 8-10 mph breeze. 
 

I’ll try and post a video of where a 7 iron landed from 155 yards.   Normally I’m hitting a 5 iron or even 6 hybrid there.   
 

The next big think was accuracy and spin ok that’s 2 more things.  These really held the line on every shot.  I think rhd SF shafts have a lot to do with that 

 

Spin—every shot that hit the green stopped within 15 feet or less.  Not bad for a low spin GI club. 
 

Here’s the pics. 
 

The comparison pics are with the T300 7 iron 

note: a couple vids were too large will have to try and reshoot 

 

 

 

 

 

Yeahhhh..... These are so going in my bag. (apologies to my 923 HM and G430)

[Lefty87]

I apologize in advance, but there are too many pages to comb through…when do the T350’s hit fitting carts? 

[ehmora]

 

2 hours ago, GC70 said:

How’d go?

 

Went well! Forgiveness of the T200 was excellent. Ended up with T200 4i and T100 5-PW. Didn't notice a huge difference looks or performance wise to T150, both were great.

 

Never hit prior gen T100 so unfortunately no feedback there. Hit old T200 briefly during a prior fitting - this version is certainly a nicer club all around!

[Carolina Golfer 2]

6 hours ago, Lefty87 said:

I apologize in advance, but there are too many pages to comb through…when do the T350’s hit fitting carts? 

I think most accounts are supposed to get the fitting heads by the late part of this month. 

[Tiptx1122]

As much as I love my Mizuno JPX 923 HMP's I can see a new set of Titleist T350 in the bag for next year only because I like to try new and different irons as my last set of Titleist were the AP2 718 or something like that and they were pretty special back then. Nothing against Mizuno as if I can wait I may see what Mizuno brings out in 2024. 

[ccantine8]

12 hours ago, ehmora said:

 

When did you place your order? 

 

My fitting/order was today and they mentioned it might not get started until Aug 3rd but I'm hopeful they are wrong!

So I ordered mine whatever day they were available for the rep to order. And it said they would ship late august but a few days later, they sent an email saying the shipping got changed it it would come tuesday

[ccantine8]

8 hours ago, ehmora said:

 

 

Went well! Forgiveness of the T200 was excellent. Ended up with T200 4i and T100 5-PW. Didn't notice a huge difference looks or performance wise to T150, both were great.

 

Never hit prior gen T100 so unfortunately no feedback there. Hit old T200 briefly during a prior fitting - this version is certainly a nicer club all around!

I got fit for the same thing 200 4i and 100 5-p

[3wood]

Going for my fitting tomorrow. Probably be the same setup as the previous 2 post 200 4i and 100 5-p. I’ve played previous t100 and currently have pxg gen 5 0311t 5-7 0317st. Also have a set of 0317cb I’m about to test, I’m a club hoe. I’ll give a good comparison afterwards. Sad it’s $39 up charge for c taper

[goudok]

So my local place had demo heads, got to him last night (indoors) unfortunately.   Due to being able to hit my fairway woods and hybrids much better now I don't need the 2i anymore and thinking of having slightly tighter gaps in my scoring clubs.

I think I am leaning towards this.

T100 PW-6

T150 5

TSr3 21 

then 5 wood and 3 wood.

[ehmora]

4 hours ago, ccantine8 said:

So I ordered mine whatever day they were available for the rep to order. And it said they would ship late august but a few days later, they sent an email saying the shipping got changed it it would come tuesday

Lucky! Hoping for the same email! 

[Warrick]

Got T200 at release, have loved them. I decide to grab T100S in 8-G, really enjoyed them, so got the 6/7 also. I have gone back and forth on the 6/7 spot, have the T200 in now, little more forgiving and higher launch, greens are firm.

 

I think I may order the 6/7 in the new T150, could be perfect blend with 100S, plus a cheap way to check them out with just 2 clubs.

[yellowjacket82]

Anybody shaft what graphite shafts will be available in the T350?