Titleist 2023 irons

[JourdanM]

1 hour ago, this_is_golf said:

I wish the T200 wasn’t shiny chrome. A satin finish like the T100/150 would be mint. 

Same. Combos would blend so much better too 

[jackfig]

5 hours ago, COmedic said:

Order placed for 5-6 T200 and 7-GW T-150. Ordered with PX IO shafts and had the GW bent to 49°. Plan on purchasing a u505 4-iron, just can’t decide on black vs chrome. Hoping they are still shipping as quickly as some of your experiences!

I ordered on Wednesday (26th) and was told by the fitter to expect 7-10 day turnaround.  I received a notice the next day that the order was in process but ship date was moved to August 23.  I just received an email a few minutes ago indicating the clubs just shipped.  Three day turnaround... not too shabby.

[Goldenhawk]

Not seeing any improvement from the CNCPT CP-04 to the new T200 and T350.  Both hit shorter than the CNCPTs and the CNCPTs still have steeper landing angles to hold the greens.  So the new T Series still not catching the CNCPTs this time around.

[Jjones519a]

I was fit yesterday.   I had already played and we had to hit off matts only. 

Swing was way off so definitely tested forgiveness.

 

I can say I was 100% certain I would order something going in.  I honestly didn't love the irons during the fitting.  The 150s looked nice but didn't find them more forgiving than the T100s I play now.

The 200s were pretty nice.  Paird them with a heavy shaft and weakened the loft a bit and they became money.

 

Not sure they were better than 790s, PXG, ...

 

Ill do another fitting before I pull the trigger.

 

First impressions we not amazing.

 

 

[TTMike]

Noticed the article from the Wedge guy on fittings. Any issues with the T150 gap wedge flying too high or too far? Presumably peak height is the same for all T150 clubs including the gap wedge? Thanks!

[TM135]

1 hour ago, Jjones519a said:

I was fit yesterday.   I had already played and we had to hit off matts only. 

Swing was way off so definitely tested forgiveness.

 

I can say I was 100% certain I would order something going in.  I honestly didn't love the irons during the fitting.  The 150s looked nice but didn't find them more forgiving than the T100s I play now.

The 200s were pretty nice.  Paird them with a heavy shaft and weakened the loft a bit and they became money.

 

Not sure they were better than 790s, PXG, ...

 

Ill do another fitting before I pull the trigger.

 

First impressions we not amazing.

 

 

I hit the t150s yesterday and I found the same. Nice irons but prefer my ‘21 T100S. Unicorn iron 

[Goldenhawk]

2 hours ago, Jjones519a said:

I was fit yesterday.   I had already played and we had to hit off matts only. 

Swing was way off so definitely tested forgiveness.

 

I can say I was 100% certain I would order something going in.  I honestly didn't love the irons during the fitting.  The 150s looked nice but didn't find them more forgiving than the T100s I play now.

The 200s were pretty nice.  Paird them with a heavy shaft and weakened the loft a bit and they became money.

 

Not sure they were better than 790s, PXG, ...

 

Ill do another fitting before I pull the trigger.

 

First impressions we not amazing.

 

 

The new P790s get released the first week of September.  The fitting heads should arrive at the shops soon.  Might give you something to compare the T150 and T200 against.

[Morry]

36 minutes ago, Goldenhawk said:

The new P790s get released the first week of September.  The fitting heads should arrive at the shops soon.  Might give you something to compare the T150 and T200 against.

790's I would argue are more like t350 comparisons - at least that's my view

770 is more like t200

tm doesn't have a club since the 760 went away to compete with t150 

new t100 is likely more of a p7mc I would say 

 

I know everyone will not agree, but that is how I see it anyway 

[Pens #1 fan]

Anyone compare new Cobra Tour to 150 or 100s yet? 

[Kball10]

11 hours ago, jackfig said:

I ordered on Wednesday (26th) and was told by the fitter to expect 7-10 day turnaround.  I received a notice the next day that the order was in process but ship date was moved to August 23.  I just received an email a few minutes ago indicating the clubs just shipped.  Three day turnaround... not too shabby.

Did you order after a team Titleist event or from some other fitter?

[jackfig]

35 minutes ago, Kball10 said:

Did you order after a team Titleist event or from some other fitter?

I ordered at a Titleist fitting event hosted at our club.  My point is that it appears that Titleist is now well prepared to handle all orders in a very timely manner.  

[underwater]

10 minutes ago, jackfig said:

I ordered at a Titleist fitting event hosted at our club.  My point is that it appears that Titleist is now well prepared to handle all orders in a very timely manner.  

 

Until the floodgates open.

[Brobespierre]

I’m definitely getting the “no fitting events in my area” blues.

[Carolina Golfer 2]

16 hours ago, this_is_golf said:

I wish the T200 wasn’t shiny chrome. A satin finish like the T100/150 would be mint. 

It was mentioned earlier in the thread. That’s based on Years of feedback to Titleist from players of all lines. The T200 and 300/350 player overwhelming prefer a chrome finish and the 100/150 players more prefer the satin.  Of course there will be exceptions to each.  But going with the majority is the best way. 

[Carolina Golfer 2]

13 hours ago, Goldenhawk said:

Not seeing any improvement from the CNCPT CP-04 to the new T200 and T350.  Both hit shorter than the CNCPTs and the CNCPTs still have steeper landing angles to hold the greens.  So the new T Series still not catching the CNCPTs this time around.

$500 per stick  compared to $200 per stick  🤔

[Goldenhawk]

18 minutes ago, Carolina Golfer 2 said:

$500 per stick  compared to $200 per stick  🤔

Trickle down theory.  One would think that the new T Series Irons would come closer to the performance of the CNCPT Irons by now.  But then again, Titleist has never revealed what the super metal alloy being used in the CNCPTs.

Edited July 30, 2023 by Goldenhawk

[FmaxTurboSi]

6 hours ago, Jjones519a said:

I was fit yesterday.   I had already played and we had to hit off matts only. 

Swing was way off so definitely tested forgiveness.

 

I can say I was 100% certain I would order something going in.  I honestly didn't love the irons during the fitting.  The 150s looked nice but didn't find them more forgiving than the T100s I play now.

The 200s were pretty nice.  Paird them with a heavy shaft and weakened the loft a bit and they became money.

 

Not sure they were better than 790s, PXG, ...

 

Ill do another fitting before I pull the trigger.

 

First impressions we not amazing.

 

 

 

dang really?  you're not the only one that's said the 150 wasn't better than the current 100S.

 

what did you like, or what did you not like about the 150 compared to your current setup?

 

It sucks you didn't get to hit them off the turf.  I'm really concerned about the turf interaction with the 150's since they're slightly larger than the 100S.  Not sure if it'll be better or worse for me.  

 

 

[globetrottingdad]

5 hours ago, TM135 said:

I hit the t150s yesterday and I found the same. Nice irons but prefer my ‘21 T100S. Unicorn iron 

 I totally agree. To me the t150 is a disappointment.. it is not as forgiving as a t200 and not as nice a feel as a t100(s). So what market is it aiming at? 
 

I found out from a retailer who is a prime TM seller, that the P770 do not sell good at all.. it is either the P790 or the 7mc. I kinda feel that titleist is making the same mistake with this T150. Just my two cents of course 

[globetrottingdad]

45 minutes ago, FmaxTurboSi said:

 

dang really?  you're not the only one that's said the 150 wasn't better than the current 100S.

 

what did you like, or what did you not like about the 150 compared to your current setup?

 

It sucks you didn't get to hit them off the turf.  I'm really concerned about the turf interaction with the 150's since they're slightly larger than the 100S.  Not sure if it'll be better or worse for me.  

 

 

I hit all titleist irons of a Matt and the turf. The t150 is not bad through the turf. Don’t get me wrong. The t100 is just so much better (in my swing). The way the ball comes off the face of the t100 is money (buttery feel).. the feel of the t150 is smooth, perhaps buttery if you absolutely flush it, but overall a muted feel. I guess due to the fact they try to make the face more forgiving so it will mute out more (vibrations). It is what you prefer. If you like the P770, the t150 will be right up your alley. If you prefer a t100 (or t100s), the t150 will be very different… in looks and feels of the face.

 

I can not comment on numbers as that is all swing , shaft etc dependent… all k can comment on is feels I experienced.

[provx]

i hit the new irons yesterday.

 

t150 looked good, wasn't anything special.

t200 had lots of pop, very impressed.

t350 a little chunky, but im not the demographic

[jorellanes]

Hit all 4 

 

T100 T150 Nothing to see here.

T200 much better/improved version. Back plate looks better and sounds is better. 

T350 Best of all. 4 super hot and easy to hit. Little thick but nothing excessive.

 

Sticking with ZX7 for now.

 

 

[Shdw]

47 minutes ago, jorellanes said:

Hit all 4 

 

T100 T150 Nothing to see here.

T200 much better/improved version. Back plate looks better and sounds is better. 

T350 Best of all. 4 super hot and easy to hit. Little thick but nothing excessive.

 

Sticking with ZX7 for now.

 

 

 

Did you feel the ZX7 was more forgiving as opposed to the T150? I am definitely between these two irons i think, with maybe a T200 in the 5i spot. It still seems even the T150 being a little larger than the T100 it is still smaller than the zx7 this is fair to say?

[jorellanes]

5 minutes ago, Shdw said:

 

Did you feel the ZX7 was more forgiving as opposed to the T150? I am definitely between these two irons i think, with maybe a T200 in the 5i spot. It still seems even the T150 being a little larger than the T100 it is still smaller than the zx7 this is fair to say?

IMO ZX7s are more forgiving and feel a LOT better compared to the T150s. 

 

[Shdw]

2 minutes ago, jorellanes said:

IMO ZX7s are more forgiving and feel a LOT better compared to the T150s. 

 

 

Thanks for the info! I am getting fit saturday in Ohio, but from the news i am hearing i may end up staying in my ZX7... the v-sole really works for me. Worse case scenario I try a bunch of shafts out that may tighten up the zx7 further. Definitely will give the T150 a fair chance though.

[jorellanes]

40 minutes ago, Shdw said:

 

Thanks for the info! I am getting fit saturday in Ohio, but from the news i am hearing i may end up staying in my ZX7... the v-sole really works for me. Worse case scenario I try a bunch of shafts out that may tighten up the zx7 further. Definitely will give the T150 a fair chance though.

Let us know. Have fun!

[realitycheck]

1 hour ago, jorellanes said:

Hit all 4 

 

T100 T150 Nothing to see here.

T200 much better/improved version. Back plate looks better and sounds is better. 

T350 Best of all. 4 super hot and easy to hit. Little thick but nothing excessive.

 

Sticking with ZX7 for now.

 

 

This is exactly what I found to be the case, also.  

[Shdw]

2 minutes ago, jorellanes said:

Let us know. Have fun!

 

Definitely, will look to hit every model and get any info, its on the 5th, so im sure with the embargo date of the 3rd there will be tons of new info on here. But i think we have most of the info figured out and based on the stamped PW lofts we can assume lofts there

[GamecockGolf]

Just got my first 9 in with 23 T200 4 iron, 23 T150 5-9. DG TI120 X100’s. T200 is much improved (still wish it were a one piece iron), from the top its great looking. T150’s offer that additional bit of help that I wanted.

 

For those struggling with them, WEAKEN the lofts. They’re pretty hot and definitely high ball, low spin. Also worth trying heavier shaft or dynamic SW combo. Some previous comments have also mentioned this, don’t be fooled by the swing speed numbers, ball speed is there with these. 

[Pomps]

Anyone been fit around Boston?

[ty_webb72]

56 minutes ago, GamecockGolf said:

Just got my first 9 in with 23 T200 4 iron, 23 T150 5-9. DG TI120 X100’s. T200 is much improved (still wish it were a one piece iron), from the top its great looking. T150’s offer that additional bit of help that I wanted.

 

For those struggling with them, WEAKEN the lofts. They’re pretty hot and definitely high ball, low spin. Also worth trying heavier shaft or dynamic SW combo. Some previous comments have also mentioned this, don’t be fooled by the swing speed numbers, ball speed is there with these. 

Did Titleist build your set? Was wondering if they were finally offering the DG TI 120 shaft.