Larger forged heads

[Bagods]

Looking for a set of larger cavity back heads. I am currently gaming Mizuno TZoid Pro Plus which I love. Looking for something similar with a larger head and forged. Any recommendations?

Edited September 8, 2023 by Bagods

[tsupo]

if ur not into brand  new........

somehitng like these  might be  an idea , about as good as a   non comapct cavity can get.

[Bagods]

35 minutes ago, tsupo said:

if ur not into brand  new........

somehitng like these  might be  an idea , about as good as a   non comapct cavity can get.

Thank you! I actually want an older set. I have been looking at those Yamahas but I haven’t heard of the PRGR. 

[Bagods]

The Mizuno pro plus are about perfect for me but the top line is pretty thick. They remind me of the Hogan Edge I played in Highschool

[elwhippy]

Wilson D9 Forged. Great irons and amazing value. 

[blades_are_life]

3 hours ago, tsupo said:

if ur not into brand  new........

somehitng like these  might be  an idea , about as good as a   non comapct cavity can get.

Those have a really nice look at address for how large they are.

[03trdblack]

These forged irons from Foreward golf are slightly larger and some of the softest I've played. I also love the way they look. 

 

Edited September 8, 2023 by 03trdblack

[Primo1868]

Not JDM but scott golf makes a larger (i believe) forged cavity back. 

[JungleJimbo]

10 hours ago, Bagods said:

Looking for a set of larger cavity back heads. I am currently gaming Mizuno TZoid Pro Plus which I love. Looking for something similar with a larger head and forged. Any recommendations?

 

Either the Miura Passing Point PP-9003 ... or the PP-9005? 

 

https://miuragolf.com/blogs/equipment/miura-pp-9005-genesis-irons

 

https://www.golfwrx.com/419156/review-miura-neo-genesis-pp-9005-irons/

 

 

 

Edited September 8, 2023 by JungleJimbo

[JS Golf]

Muira cb-302. Probably largest Forged Irons I seen.  Even larger than my Onoff forged. 

Edited September 9, 2023 by JS Golf

[DMG_Golf]

Also not JDM, but the Wishon 565MC's are well worth a look...

 

565MC Forged Irons | Wishon Golf

 

Some of the most forgiving forged irons out there! Look way better in person than in pics too.

[tsupo]

the yams and prgrs arnt   gigantic but they are on the fuller side for sure. the yams are a more rounded  ,softer look, the prgrs are a full  pro sepc  look  to the, bit squared off toe, VERY full thru the cavity and the smallest offest u will see in a cavity.
needs t osay imact with both is  fabulous aas both  were  made at ENDO JAPAN.
not as soft as others so they give feedback,
the yams  have a full topline and middled , these are almsot impossible to  best.



 

[HeadCovered]

MP-5. Not cavity back, but since you play the old T-Zoid Pro, you should have no problems hitting the MP-5. Large head for a blade, offset like the old ones. Easy to hit

Edited September 17, 2023 by HeadCovered

[HeadCovered]

On 9/8/2023 at 4:21 AM, JungleJimbo said:

 

Either the Miura Passing Point PP-9003 ... or the PP-9005? 

 

https://miuragolf.com/blogs/equipment/miura-pp-9005-genesis-irons

 

https://www.golfwrx.com/419156/review-miura-neo-genesis-pp-9005-irons/

 

 

 

 

Junk lol

[Bagods]

On 9/8/2023 at 12:19 AM, tsupo said:

if ur not into brand  new........

somehitng like these  might be  an idea , about as good as a   non comapct cavity can get.

I ended up picking up a mint set of the Yamahas. Came 1/2” shorter than standard and I need half inch long. Waiting on extensions to come back n before I hit them. Seem really nice. Top edge is remarkably thin compared to the Mizunos

[zenman4711]

Older Yamahas are fantastic and a great value.

[Bagods]

On 9/8/2023 at 12:19 AM, tsupo said:

if ur not into brand  new........

somehitng like these  might be  an idea , about as good as a   non comapct cavity can get.

I found a set of those 2010 Yamahas. Took them to the range today. Wow! They are really nice. Much nicer than the Mizunos I was playing. What year of the Yamahas are most desired and are the PRGR as nice?

[DMG_Golf]

2 hours ago, Bagods said:

I found a set of those 2010 Yamahas. Took them to the range today. Wow! They are really nice. Much nicer than the Mizunos I was playing. What year of the Yamahas are most desired and are the PRGR as nice?

 

From what I researched the 2010->2012 are most desired due to being Endo Japan forged (I think). 

[subrew]

I'm late to the party, but was going to recommend the Yamahas too.  Vastly under-valued on the used market.  Another brand to look at is Royal Collection, something like their SFD X7 line.  A bit larger overall, and a deep cavity.  PRGR has a lot of options, their Data line (like the 801 I have) are a very deep cavity.  Another interesting line is the BIIM line, which is a Bridgestone line. 

 

Photos are pretty hard to show head size differences, and none of these are LARGE, but here is an example of a few I pulled off the shelf to snap a photo of:

 

From top to bottom:

 

-BIIM 

-TM 300

-Yamaha Inpres V-forged

-PRGR Data 801

-TZoid Pro

-Srixon I506

-Royal Collection SFD X7

-Bridgestone J33

-Mizuno MP-14 for size comparison sake

 

And a couple more photos showing some of the larger heads, and a quick trace comparing the MP14 and RC SFD.

[subrew]

Some other random photos I have on my phone, these are better quality:

[ingster1]

I’m currently gaming the Mizuno JPX Pro 825s, coming from MX-23s and MX-200s.  These are all classic Mizuno GI one piece forged irons that IMO offer a nice blend of feel and forgiveness.  The 23s and 200s have more offset and a bigger blade and sole than the 825s.

[Bagods]

1 hour ago, subrew said:

I'm late to the party, but was going to recommend the Yamahas too.  Vastly under-valued on the used market.  Another brand to look at is Royal Collection, something like their SFD X7 line.  A bit larger overall, and a deep cavity.  PRGR has a lot of options, their Data line (like the 801 I have) are a very deep cavity.  Another interesting line is the BIIM line, which is a Bridgestone line. 

 

Photos are pretty hard to show head size differences, and none of these are LARGE, but here is an example of a few I pulled off the shelf to snap a photo of:

 

From top to bottom:

 

-BIIM 

-TM 300

-Yamaha Inpres V-forged

-PRGR Data 801

-TZoid Pro

-Srixon I506

-Royal Collection SFD X7

-Bridgestone J33

-Mizuno MP-14 for size comparison sake

 

And a couple more photos showing some of the larger heads, and a quick trace comparing the MP14 and RC SFD.

Thank you! I had someone else recommend the PRGR ID BL??? As well. Have you ever played the Yonex E Zone? They appear to be a little larger than standard. 

[Tzoid]

I know I sound like a broken record but these are for me perfect size with feel and forgiveness.  I think a buddy may be selling his soon

since he has the 2024 Kuro Irons on order. 

 

 

[DMG_Golf]

2 hours ago, Tzoid said:

I know I sound like a broken record but these are for me perfect size with feel and forgiveness.  I think a buddy may be selling his soon

since he has the 2024 Kuro Irons on order. 

 

 

 

Always look forward to a post from you Tzoid... because 9 times out of 10 it'll be about OnOff or have a picture of those sweet Kuros! 🙂

[Tzoid]

21 hours ago, DMG_Golf said:

 

Always look forward to a post from you Tzoid... because 9 times out of 10 it'll be about OnOff or have a picture of those sweet Kuros! 🙂

I think I'm on my 6-7th set and they are soooooo good 

[DMG_Golf]

2 hours ago, Tzoid said:

I think I'm on my 6-7th set and they are soooooo good 

 

I've got a little side hunt going for a set of 2013's. I know 2015's are awesome, but hear great things about the '13's, so want to have a go at them as well. 🙂

[Ger21]

23 hours ago, DMG_Golf said:

I've got a little side hunt going for a set of 2013's. I know 2015's are awesome, but hear great things about the '13's, so want to have a go at them as well.

I was on the lookout for either one, in the best condition I could find. Couldn't pass these up. There are a lot of decent 2013's on Ebay, but these were a little better. Almost all of them are from Japan. Only took 4 days to get them here.

 

 

Edited October 11, 2023 by Ger21

[DMG_Golf]

1 hour ago, Ger21 said:

I was on the lookout for either one, in the best condition I could find. Couldn't pass these up. There are a lot of decent 2013's on Ebay, but these were a little better. Almost all of them are from Japan. Only took 4 days to get them here.

 

 

 

Nice... those look real clean. Love the ferrules too!

[Ger21]

9 hours ago, DMG_Golf said:

Nice... those look real clean. Love the ferrules too!

Thanks. Just finished building them last night. Just in time to put them away for the winter. Hopefully I can get a couple rounds in.

[tsupo]

might want to  look at a cpl of the  semi older srixons as well.    not  cavitys  but i put the  z945s back in the bag recently and was instantly  reminded how good these thinngs are and how beautiful they  feel.

i dont know whey SrIXON  dont get th kudos they shud get.
its dunlop for gorsakes , their  stuff is as   good as a club can get, i preume bec  its a bit more generic,

 

  which is just wrong.