Budget irons for a single handicaper

[cdodom91]

I have been playing the MP69s for about 3 years now. The irons are pretty good when I’m playing well but are not the most forgiving irons.

 

After having a daughter 3 weeks ago I’m in need of a set of irons in the 250-300 range that are a little easier to play but still offer SOME workability. They also need to have that players iron look at address.

 

Any suggestions?

[TexasHarley]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F263929599244

 

 

[TexasHarley]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F382562082327

 

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F382562082276

[TexasHarley]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F362433344230

[billp]

Wilson irons are the go. V5 or V6 are as good as each other, both forged and buttery smooth, but with extra forgiveness.

 

I just picked up some FG F5 irons (more game improvement than the V5) and very happy with them

[Arlin964]

Following!

[JJK947]

Two at the top of my list would be MP64 and Srixon Z745. Usually can find with S300 pretty cheap.

[Bushwood Country Club]

2014 AP2s? What is your preferred set makeup? 4-P?

[Solidstrike]

Congrat! An older Mizuno cavity might work. MP 57’s are what I picked up. You can get them in that price range. They are more forgiving but offer that classic Mizuno feel and workability.

[suprfli6]

J40 CB/DPC sets pop up on the bay for $300ish in almost-new condition every now and then, that’s another model to keep in mind. My 5-PW set was $280 when I got them a couple years ago and they were nearly mint.

[iutodd]

Following this for sure. I’m not a single handicapper (10-12 probably) but I’m looking for more of a “players” iron - right now I have something that is too much of a game improvement iron.

 

The Wilson FG F5s are currently at the top of my list.

[Arlin964]

Following this for sure. I’m not a single handicapper (10-12 probably) but I’m looking for more of a “players” iron - right now I have something that is too much of a game improvement iron.

 

The Wilson FG F5s are currently at the top of my list.

 

What are you gaming now?

[grochol17]

Take a look at MP 60s. I don't know if you can find anything in good condition since they were released a while ago, but those are great irons with feel and forgiveness and the players look at address you're looking for.

 

If you want something newer, consider MP 25s. I've heard there are some really good deals to be had online on those irons, but haven't looked into it myself.

[jjharrs2]

I just got a 3-PW of Cobra Fly Z+ for a little under $300. They look great and offer some workability. The going rate on the Bay is right around there if you do some digging.

 

As others stated, an older set of some Mizuno CBs would treat you well!

[me05501]

Srixon forged, definitely. Mine are the older i-506's (I think?) and they can be had dirt cheap. I LOVE them.

[Pi5seeker]

I have a set of really nice Wilson Pi5's with S300's I can let go for $100 shipped. They have maybe 12 rounds on them. They are 2* upright with Tacki Mac grips (kind of like NDMC).

[AltaGuy]

Ping s55 can be found easily for that price. Many still swear by them, and they’re invincible. Easy to hit, player’s look you want, and there are a ton of sets available.

[cdodom91]

Anyone have any experience with the maltby irons? Like mmb and dmb

[Pi5seeker]

Anyone have any experience with the maltby irons? Like mmb and dmb

 

The TE/DBM are fantastic to play and are really forgiving for a "players" iron. The TE (chrome) is a little softer making them more bendable for loft/lie and the DBM is a little firmer but not hard by any means. The DBM finish has held up wonderful for me for several seasons use. I tried Ping I200's last season and I500's this season but prefer my DBM's. They can't be beat especially for the price and the fact you can pick any shaft, grip, etc. makes them a no brainer purchase.

[cdodom91]

Anyone have any experience with the maltby irons? Like mmb and dmb

 

The TE/DBM are fantastic to play and are really forgiving for a "players" iron. The TE (chrome) is a little softer making them more bendable for loft/lie and the DBM is a little firmer but not hard by any means. The DBM finish has held up wonderful for me for several seasons use. I tried Ping I200's last season and I500's this season but prefer my DBM's. They can't be beat especially for the price and the fact you can pick any shaft, grip, etc. makes them a no brainer purchase.

 

I play the c taper 130x in my mp69. Do you think that shaft would fit well with the DBM? It’s a low flight shaft so having a head that’s easier to get the ball in the air is a must in my opinion.

[Pi5seeker]

Anyone have any experience with the maltby irons? Like mmb and dmb

 

The TE/DBM are fantastic to play and are really forgiving for a "players" iron. The TE (chrome) is a little softer making them more bendable for loft/lie and the DBM is a little firmer but not hard by any means. The DBM finish has held up wonderful for me for several seasons use. I tried Ping I200's last season and I500's this season but prefer my DBM's. They can't be beat especially for the price and the fact you can pick any shaft, grip, etc. makes them a no brainer purchase.

 

I play the c taper 130x in my mp69. Do you think that shaft would fit well with the DBM? It’s a low flight shaft so having a head that’s easier to get the ball in the air is a must in my opinion.

 

Yes that would be a good fit. I play S300 and don't have a problem getting the 5 iron airborne.

[Gobears16]

For budget friendly I’d look at Wilson FG V4 with x-100’s. Can be found new or “mint” for $250... I don’t think the tech is much different than the V6’s

[AKHx03]

Take a look at MP 60s. I don't know if you can find anything in good condition since they were released a while ago, but those are great irons with feel and forgiveness and the players look at address you're looking for.

 

If you want something newer, consider MP 25s. I've heard there are some really good deals to be had online on those irons, but haven't looked into it myself.

 

I still have my MP-60 in excellent condition. They were replaced with my JPX 900T but I will never get rid of them.

[Simp]

Try and find a nice set of 04/05 TaylorMade RAC CB's. Miura Forged and definitely a players club. They can be found at a good price if you look hard enough. Cough cough

[Radeon962]

Callaway Pre Owned just started their new weekly deal for up to 30% off irons or check 3Balls, Globalgolf or 2nd Swing who all have most every iron set for any budget. If not, look on the BST here and find something.

 

I just picked up a set of Ping i200's that would have been within your set budget.

[nolixul]

Adams CMB would probably be my top choice.

Cleveland 588 CB. Endo forged goodness.

Wishon forged cbs, various models.

 

You could also probably get some of the tour issue stamped RBladez Tours for that budget

[chisag]

I just got a 3-PW of Cobra Fly Z+ for a little under $300. They look great and offer some workability. The going rate on the Bay is right around there if you do some digging.

 

 

... These are in my Hall Of Fame for irons. I played the AP2's and really liked them but the feel was missing. Enter Amp Forged with a thinner topline and much better feel. They were replace by Fly Z+ irons of course and now the Forged Tours. I think they are the most under appreciated irons of all time. Anyone that has played them just rave about them. But so few have played them. I have had all 3 versions and other than cosmetics they play virtually identical. Workable if you have the skill and very forgiving for their size and shape.

[jonn443]

J15 CB, J40 CB, MP-53, 745, and Callaway XForged 2013.

[iutodd]

Following this for sure. I’m not a single handicapper (10-12 probably) but I’m looking for more of a “players” iron - right now I have something that is too much of a game improvement iron.

 

The Wilson FG F5s are currently at the top of my list.

 

What are you gaming now?

 

Mizuno MX-17.

[jjharrs2]

I just got a 3-PW of Cobra Fly Z+ for a little under $300. They look great and offer some workability. The going rate on the Bay is right around there if you do some digging.

 

 

... These are in my Hall Of Fame for irons. I played the AP2's and really liked them but the feel was missing. Enter Amp Forged with a thinner topline and much better feel. They were replace by Fly Z+ irons of course and now the Forged Tours. I think they are the most under appreciated irons of all time. Anyone that has played them just rave about them. But so few have played them. I have had all 3 versions and other than cosmetics they play virtually identical. Workable if you have the skill and very forgiving for their size and shape.

 

Your handicap and your comment make my purchase feel even better! I watched some reviews videos and even though the reviewers aren't Cobra players, you could tell they would think about gaming those irons.

 

OP, Cleveland 588s were close to the top of my list as well, but I just liked the Cobras a little bit better. The TTs were getting rave reviews when they came out. You seem to have plenty of options now, so I'll stop giving more to you.