Titleist 2023 irons

[MattyO1984]

10 hours ago, Tiptx1122 said:

So how is everybody able to order these so early when all I have been told you can’t pre-order them till August 3

 

I went to what was described as a launch event. Titleist Rep for Scotland was there and did the entire fitting for me whilst my friend/club pro watched along. The Titleist Rep send the details to the club pro and he ordered them up the next day. 

[Warrick]

Ordered the T150 6/7 earlier this week, going to combo in with T100s, 8-G.

[ccantine8]

1 hour ago, yellowjacket82 said:

Typically the 7 iron is the fitting iron.  Was that the case? 

There is a substantial transition to better sound and feel between the T300 7 and 8 irons.  Maybe it's that way with the 350.

It was a 7 iron fitting. But the only 350 I hit was the 4 iron. They had 4 and 5 irons of the models too, just not adjustable.

[kamizzou91]

Is anyone getting fit into a full set of T200?  It seems that most folks are getting fit into combo sets, which is interesting.  I would classify myself as the T200 target market, but it seems that T200/T150 may be what I end up getting fit into.  

[stevechooster]

12 hours ago, Tiptx1122 said:

So how is everybody able to order these so early when all I have been told you can’t pre-order them till August 3

 

A lot of ppl are signed up for newsletters from Titleist (Team Titleist as it's called) and we got an email a while back about a special fitting opportunity for the T series irons before public release, as well as a chance to order them during the fitting. Obviously there are folks on here who know of a rep or have connections to get fitted earlier as well. Anyway, nothing special to access the fitting.

[kevster1]

Titleist fitters are really pushing the combo sets with this cycle of irons...tons of fitting examples showing this exact thing.

[callofthewild]

1 hour ago, kamizzou91 said:

Is anyone getting fit into a full set of T200?  It seems that most folks are getting fit into combo sets, which is interesting.  I would classify myself as the T200 target market, but it seems that T200/T150 may be what I end up getting fit into.  

I would have classified myself as the same (full set of T200) coming from Apex CF16s. But if I had to guess, I may end up with a little T150, mostly T200 in the middle, and then maybe even a T350 4 or 5 iron based on how they seem to be very focused on split sets with this line-up. My fitting is in two weeks so we shall see. Having followed this thread for a while, it seems like most people are ending up with at least one more forgiving iron than the rest of their main set, with some people having two.

[3wood]

Irons just shipped but thinking I might’ve went with the wrong shaft lol. The life of a club hoe

[Carolina Golfer 2]

29 minutes ago, 3wood said:

Irons just shipped but thinking I might’ve went with the wrong shaft lol. The life of a club hoe

It wouldn't be a WRX purchase or order if we didn't 2nd guess the shaft or the combo split etc 🙂  

[gaffs]

Why didnt they make the T200/T350 brushed steel? That would make blending even more seamless.

[gaffs]

4 hours ago, TheOverratedPhotog said:

I hit my T100S pretty good so he started on a T150.

 

 

 

As a previous T100S player, was the difference in size and distance between the T100S and T150 ? 

[gaffs]

Anyone considering the T150s and having the lofts weakened? 

 

I want the little bit of forgiveness that the T150 seem to offer over the T100, but don't want to play a PW at 44. And i don't want the mixed set.

[lpitts82]

7 minutes ago, gaffs said:

Anyone considering the T150s and having the lofts weakened? 

 

I want the little bit of forgiveness that the T150 seem to offer over the T100, but don't want to play a PW at 44. And i don't want the mixed set.

I considered it but it didn’t really make sense for my setup. Adding an extra wedge and dropping the hybrid was my best option and allows me to have more full wedges shots hopefully. 

[Pure716]

I just received an email today from Titleist University with their two new learning modules:

 

"2023 T-Series Product Education Course" and "Iron Fitting Principles." The two videos are only about 45 minutes long so I should be able to watch them tonight and give some spark notes to this forum tomorrow if anyone is interested.

 

Edit: See Below

Edited July 21, 2023 by Pure716

[titushem]

got fit 2 weeks ago with T200 7-G and T300 6i. I haven't hit any Titleist irons in a while (last time was the old AP3). The sound and feel of the T200 is just so much better than the AP3s. Aside from the top line profile, it was hard to notice the difference between the various models.

[chocolate_rehab]

Any change to the graphite shaft offerings?

[Carolina Golfer 2]

3 hours ago, gaffs said:

Why didnt they make the T200/T350 brushed steel? That would make blending even more seamless.

Titleist R&D and other companies for that matter have said, the T200 and T350 segment players prefer a shiny or chrome finish, so those two can be blended easily.    Where the elite and better players prefer the satin...therefore the T100 and T150

 

1 hour ago, Pure716 said:

I just received an email today from Titleist University with their two new learning modules:

 

"2023 T-Series Product Education Course" and "Iron Fitting Principles." The two videos are only about 45 minutes long so I should be able to watch them tonight and give some spark notes to this forum tomorrow if anyone is interested.

Got it as well and got a 100% on the final exam.  Man if I had only done that well in college.  But then again the subject matter was of a bit more interest...ha

 

Edited July 21, 2023 by Carolina Golfer 2

[AKub]

3 hours ago, gaffs said:

Anyone considering the T150s and having the lofts weakened? 

 

I want the little bit of forgiveness that the T150 seem to offer over the T100, but don't want to play a PW at 44. And i don't want the mixed set.

this is what I did. Went a degree weak which helped add a few 100 rpm backspin for me which is what we were looking for and I went 5-PW now at 45. Will go 50,54,58 and then play a 4 hybrid in tsr2 which I have already and love. 

Edited July 21, 2023 by AKub
Spelling

[NK425]

Is that 2 degrees of stronger loft noticeable?

[saebaebae]

Is Titleist coming out with new traditional blades? 

[MrShield]

4 hours ago, gaffs said:

Anyone considering the T150s and having the lofts weakened? 

 

I want the little bit of forgiveness that the T150 seem to offer over the T100, but don't want to play a PW at 44. And i don't want the mixed set.

Maybe consider what I’m doing?

 

I order 3-9 in T150 and P in T100, same as I did with original T100s. 
 

Then I use 52, 58 so the only difference is my 6* gapping start after 9 instead of P. Has been working great for years since T100s first came out. 

[Pure716]

As mentioned above, I just finished the Titleist University product course. The point of the course is to give people general sales points, changes vs previous years, and information related to fittings. I took a pretty detailed set of notes on what I took away from this. I'd absolutely share it below so long as the moderates are cool with it? Almost all of my notes have already been covered at some point in these 37 pages.

[dwboston]

Titleist tweeted out that Spieth put a T150 3-iron in the bag this week for the Open.

[Llortamaisey]

Are they still using D18 tungsten or did they upgrade to D19?

[stevechooster]

Just finished my fitting at Tr**p National in PV (don’t want my comment to get false flagged again lol). I got T200 4-6 (1* weak)  / T150 7-GW, DG AMT White S300 Onyx with Iomic grips. 
 

First off, no pics available on my part… I was occupied with a last minute work call and I was the last Appt so the crew was slowly packing and I didn’t want to occupy them further. Based on pics that others have already posted here, you can’t tell the difference at address between the 100/150. It is true that 4/5 is slightly longer with a slightly thicker sole, but I thought it looked perfectly fine given the club. They couldn’t share too much but 150 heads are about 10g heavier. I tried it all and with some shanks loaded in the barrel, it was quite the show lol (maybe that’s why the fitter gave me 10% off).  Either way, anyone looking at the T100s, you’ll like a T150 4i in the bag. It’ll be good insurance. 
 

In terms of shafts, holy sh*t it was overwhelming. Steel shafts, they’ll likely have it. My fitter said they were in the process of getting MMTs and I think Axioms in the future. He said LAGP shafts were unlikely (no surprise). For anyone there for woods, they had Autoflex haha… and and infinite number of Tour AD and Fuji shafts. Again, the general shaft variety was wide considering this was a Titleist fitting so they brought out multiple tents of shafts. 
 

The back badging is beautiful as the pics posted here. The feel is what caught me off guard. The T100 felt even softer for me than prior model. Such an amazing club. When these hit retail, no doubt it’ll be the #1 played club on tour again. T150 felt a little heavier but the launch window was the same. Heavier head, weight placement, and overall design likely influencing dynamic loft.. in such a way that it can give you some extra power/distance but do it in a way that still maintains good spin. As others have noted, the T200 was improved. The rep said “we heard all Titleist loyalists give us sh*t about the acoustic and the polymer badging, so we tweaked it lol”. I really think this club will fall into ppl’s bag more surprisingly than not. I decided to humble myself and just get it thru the 6i for the extra help. 
 

What I found interesting was the T200 U iron (from what my fitter told me) was more designed to blend into the T100 player’s bag with its loft (I.e. 4i is 22* in the U, while T200 4i is 21*, which is why I got my T200s bent 1* weak). We’ll learn more when the embargo is lifted in the coming weeks. 
 

Titleist just doesn’t fail man. 

[bazinky]

3 hours ago, MrShield said:

Maybe consider what I’m doing?

 

I order 3-9 in T150 and P in T100, same as I did with original T100s. 
 

Then I use 52, 58 so the only difference is my 6* gapping start after 9 instead of P. Has been working great for years since T100s first came out. 

Can't believe I never thought of this. Been playing 52, 58 for years, and am not crazy about going to a 44 in the pitching wedge. Really like 6 degree gaps in the more lofted wedges, and I don't see why it wouldn't work fine with the P.

Edited July 22, 2023 by bazinky
Spelling

[Carolina Golfer 2]

2 hours ago, Llortamaisey said:

Are they still using D18 tungsten or did they upgrade to D19?

D18 

[dlovage]

9 hours ago, Carolina Golfer 2 said:

It wouldn't be a WRX purchase or order if we didn't 2nd guess the shaft or the combo split etc 🙂  

Just waiting for the first ones to hit Wrx to snag 😝

[Wonderboy]

52 minutes ago, bazinky said:

Can't believe I never thought of this. Been playing 52, 58 for years, and am not crazy about going to a 44 in the pitching wedge. Really like 6 degree gaps in the more lofted wedges, and I don't see why it wouldn't work fine with the P.

Same here.  Already thinking of going T200 4 iron, T150 5-9, and T100 PW, then go 50, 54, 60.

[ranchsooner]

Ordered mine on Wednesday afternoon and got shipping notification today.