Post a Pic of Your Latest Purchase.......

[Lasorcier]

Got lucky on the bay.  4 through W and darn near new with X100s to boot.  

 

Edit: omigosh omigosh omigosh these are great irons both results and feel.

Edited September 23, 2023 by Lasorcier
Above

[ApostateDrive]

10 minutes ago, Lasorcier said:

Got lucky on the bay.  4 through W and darn near new with X100s to boot.  

 

 

Stunners! I would 100% be playing Wilson irons if I had to move from what I'm playing now. 

[brad1978golf]

2 hours ago, Andygolderson said:

Beauties. Those grips are also very tacky. Need to find the name and maybe order some. I got one randomly on a second hand club.

https://www.no1grip.com/
 

I wasn’t sure about them at first but yes quite tacky but feel great in the hands. 

[imkirby34]

Previously posted a pic of the G425 22* a few weeks ago and liked it very much while playing in Ireland.  However, it goes quite a bit farther than the Rogue 23* it replaced, which created a huge gap from my 5i.  So I bought the G425 26* and will, for the time being, have both in the bag and remove my venerable M1 5w.

[03trdblack]

13 hours ago, Phabs said:

Lucked out at a play it again sports halfway across the United States.  Finally found a 5 iron

 

I love it when a set comes together! 

[03trdblack]

13 hours ago, Phabs said:

Lucked out at a play it again sports halfway across the United States.  Finally found a 5 iron

 

Double post 😬

Edited September 22, 2023 by 03trdblack

[BallerNate]

Special delivery today!

 

I’ve tried so many clubs in the 4-iron/Driving Iron spot. Just praying this can be the solution to fit alongside my P770’s…we’ll see!! 
 

Edited September 22, 2023 by BallerNate

[Teebs]

Tsr2 5 wood

 

[Chungy]

[1s1k]

@Chungy Who built those for you?  Very nice

[Chungy]

On 9/24/2023 at 5:57 PM, 1s1k said:

@Chungy Who built those for you?  Very nice

Tyson’s West golf in Northern VA. 

[mvhoffman]

Sim 2 has been sold, here is her replacement!

 

[Ger21]

New wedges to close out the season. Picked up this head on Ebay, and have a 50° coming from Fourteen on Saturday. Won't be able to build them until next week. BB&F ferrules and Fujikura Pro 115i shafts en route.

 

 

[ALX]

Had a short run with the tri-hot lol picked up this spider gtx

[lefthack]

 

It was pretty cheap, I had to.🤣

Edited September 28, 2023 by lefthack

[AU_Matt]

Sub70 699 combo 4-6i in standard, 7-PW Pros. First set of graphite shafted irons and itching to play them Friday.

[imkirby34]

Just peeled off the plastic from this G425 LST 10.5*.   The Tour AD IZ 7s I'm pairing with it is currently curing after an adapter change.

[PlatinumNike]

finally built

RTX6 50,54,58 with BB&F ferrules, DG satin black shafts 

[BallerNate]

Picked up some new wedges to mess around with and get dialed in for the home stretch of the season!

 

Looks like Cleveland found a way to make the Zipcore line even better!! 
 

[PingCrosby]

15 hours ago, AU_Matt said:

Sub70 699 combo 4-6i in standard, 7-PW Pros. First set of graphite shafted irons and itching to play them Friday.

Did you demo these or did you know these were what you wanted? I'm demoing the 749's and 799's. Once I get the capital I'm going to be purchasing some 749's. They are so forgiving and feel so stable in my hands. Lots of distance too.

[AU_Matt]

2 hours ago, PingCrosby said:

Did you demo these or did you know these were what you wanted? I'm demoing the 749's and 799's. Once I get the capital I'm going to be purchasing some 749's. They are so forgiving and feel so stable in my hands. Lots of distance too.

I did a demo of the 699 pro with the standard steel shafts last month. Closest i could get to trying out the shaft was playing more with my 699U 3i with the same one, and figured it would transfer well to the full set. I figure if it doesnt work out too well I will just start my first adventure in club building and re-shaft them myself.

[PingCrosby]

13 minutes ago, AU_Matt said:

I did a demo of the 699 pro with the standard steel shafts last month. Closest i could get to trying out the shaft was playing more with my 699U 3i with the same one, and figured it would transfer well to the full set. I figure if it doesnt work out too well I will just start my first adventure in club building and re-shaft them myself.

What did you find was the main difference in hitting the Pro's vs the Standards?

[AU_Matt]

2 minutes ago, PingCrosby said:

What did you find was the main difference in hitting the Pro's vs the Standards?

Sorry, should've clarified-I only demoed the pros. Thought process with the standards was that i have enough difficulty hitting my utility off the ground that there wasn't much sense in getting the pro long irons. Also makes for a more gradual transition between the utility with its offset and thick profile down to the smaller pros.

[Mikey_HACKilroy]

Why do I keep doing this? 😄

 

I've liked the CB and the Hybrid Riptide shaft, so why not go to the max on the driver just to see how it feels?

 

Evenflow Riptide 80G 6.5TX SMB

 

I was thinking about trying a TX Flex 80G for the heck of it and it was a pretty good deal. Maybe I won't be able to game it, but what kind of WRXer would I be if I didn't experiment?

[Jackal]

Srixon iron set Zx5 -4,5,6 iron. Zx7 -7,8,9, PW.

Smooth as butter.

[Roejye]

Take a guess at what my next project is going to be

 

I also found some nice wall art that isn't specifically a golf course, but reminds me of one for my bedroom walls

[mvhoffman]

6 hours ago, Roejye said:

Take a guess at what my next project is going to be

 

I also found some nice wall art that isn't specifically a golf course, but reminds me of one for my bedroom walls

I was going to comment on the art since you had it laid out like that, I thought it was a water/oil mix painting and it was drying lol.  I was going to say nice job.  Don't forget the masking/painters tape to blow the grips onto.

 

also make sure that after you put 1 grip on to check it for flat spots.  I had a set of the Geoleap and there were flat areas where the grip was pressed together and even though the grip was on straight, the flat areas touching my hands had the club open many degrees.  Nice cheap option as long as they are set properly.

Edited September 29, 2023 by mvhoffman

[Roejye]

5 hours ago, mvhoffman said:

I was going to comment on the art since you had it laid out like that, I thought it was a water/oil mix painting and it was drying lol.  I was going to say nice job.  Don't forget the masking/painters tape to blow the grips onto.

 

also make sure that after you put 1 grip on to check it for flat spots.  I had a set of the Geoleap and there were flat areas where the grip was pressed together and even though the grip was on straight, the flat areas touching my hands had the club open many degrees.  Nice cheap option as long as they are set properly.

Thanks for the advice, I was going to pick up some masking tape but now that I've heard painters tape, I've got a bunch from this renovation. Thanks for the info of the grips too.

 

The paintings are just laid out that way because I haven't gotten around to hanging them yet, and I was just leary of them being damaged more from being stacked on each other. I know they'd most likely be ok, but since they're already slightly worn/scratched and I have the space to lay them out I did.

[Mrgreen36]

This was cheap enough that if I don't like it, I can't really lose money selling it. Head cover isn't too shabby either. 

[Chambies]

18 hours ago, Jackal said:

Srixon iron set Zx5 -4,5,6 iron. Zx7 -7,8,9, PW.

Smooth as butter.

How long did they take to come in?? I currently have some on order