(NO BUY/SELL/TRADE POSTS) Air Jordan GOLF footwear - AJ12 Low G Cherry - 12/13/22

[Ereim]

[AzSuperHack76]

Got to play a round in the Lows today. One of the more comfortable Jordans I’ve played in. Not 11 comfy but just as comfy as the ADG’s. I wear a size 11, ordered a size 11 and they fit perfect. 

[cookszn]

On 2/1/2022 at 1:14 PM, lefthack said:

My Retro 4's don't squeak, but I only have 4 rounds in them so far. 

If your shoes squeak out baby powder under the insole 

[Drwoods2017]

Would love to know if we’re getting Jordan 1 releases for the majors or 12’s. Maybe Zona could shed some light. 

[Wildwoody]

3 hours ago, Drwoods2017 said:

Would love to know if we’re getting Jordan 1 releases for the majors or 12’s. Maybe Zona could shed some light. 

 

For the majors packs it will be the 12's this year. 

[kc098200]

17 hours ago, Wildwoody said:

 

For the majors packs it will be the 12's this year. 

Why not both? In previous years we got am1s and Jordan's. This year jordan lows are essentially replacing the am1s. 

[zonacats23]

3 hours ago, kc098200 said:

Why not both? In previous years we got am1s and Jordan's. This year jordan lows are essentially replacing the am1s. 

Well the AM 1s havent been around for a while now. Last year was the AM 90s. And this year the AM 90s are still here. So the AJ 1 lows are not replacing AM 1s, nor the AM 90s. So....

[Jicka]

2 hours ago, RoyaleWithCheese said:

so my 1 lows came in. I went .5 size down and they fit exactly like my 5s (that are a half size larger)

 

I went with the same size in both after reading through this thread and they both fit ok. I think the 5 is a little shorter but it actually fits my wide foot better. They are pretty comfortable and the 1s aren’t as much. 

[zap311]

On 2/4/2022 at 4:58 PM, AzSuperHack76 said:

Got to play a round in the Lows today. One of the more comfortable Jordans I’ve played in. Not 11 comfy but just as comfy as the ADG’s. I wear a size 11, ordered a size 11 and they fit perfect. 

How was the traction on them? Did you play in dry or wet conditions?

[courcy75]

On 2/2/2022 at 11:11 AM, Ty Vil said:

https://www.ebay.com/itm/RARE-Jordan-11-Snake-Pack-Unreleased-Masters-Golf-Shoes-Size-10-Nike-Holy-Grail-/275086803461?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

100% my grail golf shoe but I'm out after 1k lol. Wish I was lucky enough to find these in Burlington like these flippers did. 

[RMG1984]

1 hour ago, courcy75 said:

100% my grail golf shoe but I'm out after 1k lol. Wish I was lucky enough to find these in Burlington like these flippers did. 

I feel like finding any decent Nike shoe at Burlington or the like is literally like winning the powerball! 

[courcy75]

14 minutes ago, RMG1984 said:

I feel like finding any decent Nike shoe at Burlington or the like is literally like winning the powerball! 

lol yeah. These "professional shoppers" own that market. 

[AzSuperHack76]

22 hours ago, zap311 said:

How was the traction on them? Did you play in dry or wet conditions?

Dry, they were no different than any other spikeless shoes I’ve worn. 

Edited February 10, 2022 by AzSuperHack76

[a_gorilla]

Walked a hilly 18 at 645am last weekend with the 1 lows just fine. Traction was decent in dewy conditions, but mud could cause some concern if you take a big rip at the ball. Comfort wise, comparing to other recent Nike spikeless shoes, I would go:

 

270 >>> 1 low >> 90

 

but I also have an additional insole in my 1s...they feel pretty comfy but also VERY low to the ground if that matters

[Patrik1982]

For those that also have Victory G Lite, do you go same size in Air Jordan 1 Low?

[omoub001]

On 2/9/2022 at 12:20 AM, zap311 said:

How was the traction on them? Did you play in dry or wet conditions?

 

So I've played two rounds in my AJ1 Lows and the traction is phenomenal. Played a 7am morning dew round and did not slip once in them and I am a big guy. I'm really happy with the way these perform and it's become my favorite golf shoe in my rotation now over the ADG3s and my TW71s. I haven't been this comfortable and stable since my Nike LC4s.

[apex523]

Got shadows from Puetz.  Not sure if i should have sized down as they’re definitely tighter. Should loosen up with wear though i hope

 

Edited February 12, 2022 by apex523

[1vision33]

Finished my “Nuetral Grey” custom today. All white was just too boring for me… had a lot of fun doing this, my first time ever painting a shoe. Can’t wait to play a round in them! 
 

 

Edited February 12, 2022 by 1vision33

[fourunder68]

12 hours ago, 1vision33 said:

Finished my “Nuetral Grey” custom today. All white was just too boring for me… had a lot of fun doing this, my first time ever painting a shoe. Can’t wait to play a round in them! 

Not bad

[fjk]

13 hours ago, 1vision33 said:

Finished my “Nuetral Grey” custom today. All white was just too boring for me… had a lot of fun doing this, my first time ever painting a shoe. Can’t wait to play a round in them! 
 

 

Looks great! Can you elaborate on what you did. The all whites look awful to me. 

[1vision33]

1 hour ago, fjk said:

Looks great! Can you elaborate on what you did. The all whites look awful to me. 

 

Pretty much got everything on Amazon. 
 

1. Taped everything off so I didn’t have to be super careful

2. “De-glazed” the factory finish on the areas of the leather I wanted to paint with isopropyl alcohol and alcohol wipes

3. Used the thinner to thin the grey for the sock liner. I was only intending to do the visible part of the sock liner but I thought I might as well just “finish the job” so I did the whole thing

4. (3) light coats of the light grey paint, drying in-between of course. I did not thin the grey paint for the leather. 
5. (2) coats of the Matte finisher, drying in-between coats. 
6. Remove tape 😊

 

The finished pictures look darker than the actual tone in-person. 
 

 

 

Edited February 12, 2022 by 1vision33

[Minarets]

Wow.  Even colored the foam in the ankle area.  Impressed 

[str8up]

8 hours ago, 1vision33 said:

 

Pretty much got everything on Amazon. 
 

1. Taped everything off so I didn’t have to be super careful

2. “De-glazed” the factory finish on the areas of the leather I wanted to paint with isopropyl alcohol and alcohol wipes

3. Used the thinner to thin the grey for the sock liner. I was only intending to do the visible part of the sock liner but I thought I might as well just “finish the job” so I did the whole thing

4. (3) light coats of the light grey paint, drying in-between of course. I did not thin the grey paint for the leather. 
5. (2) coats of the Matte finisher, drying in-between coats. 
6. Remove tape 😊

 

The finished pictures look darker than the actual tone in-person. 
 

 

 

did you use a paint sponge for the sock liner?

 

[blink3665]

My humble suggestion is to use gac900 for the sock liner. It's a great medium for fabric that will keep the liner soft!

[mission_scratch]

Great job @1vision33 !! Love seeing more people customize their golf shoes! Agreed with  what @blink3665 said - using GAC-900 (1:1 ratio) allows the paint to soak “into” the sock liner vs staying “on-top” of the sock liner-  will also need to heat set if using the GAC-900 for 2-3 mins after each coat -  this will set the paint and keep it soft while helping the paint not rub off on your socks.  
 

keep up the great work 

[jpdx]

1 hour ago, mission_scratch said:

Great job @1vision33 !! Love seeing more people customize their golf shoes! Agreed with  what @blink3665 said - using GAC-900 (1:1 ratio) allows the paint to soak “into” the sock liner vs staying “on-top” of the sock liner-  will also need to heat set if using the GAC-900 for 2-3 mins after each coat -  this will set the paint and keep it soft while helping the paint not rub off on your socks.  
 

keep up the great work 

Couple questions for you and @blink3665, i have a pair of 11’s. Worn them a few rounds while travelling. Now the liner is stained a bit brown from dirt and sand. Thoughts on painting them white with that gac-900 stuff? Or, a way to clean them without tearing it up? I scotch guarded but even then, i cant get them white again. 
 

obviously, didnt have the right tools to clean them after the round while travelling 😭

 

edit: when you say use heat to set, you mean like a hair dryer? Or something stronger?

Edited February 13, 2022 by jpdx

[mission_scratch]

3 hours ago, jpdx said:

Couple questions for you and @blink3665, i have a pair of 11’s. Worn them a few rounds while travelling. Now the liner is stained a bit brown from dirt and sand. Thoughts on painting them white with that gac-900 stuff? Or, a way to clean them without tearing it up? I scotch guarded but even then, i cant get them white again. 
 

obviously, didnt have the right tools to clean them after the round while travelling 😭

 

edit: when you say use heat to set, you mean like a hair dryer? Or something stronger?

I’d use a soft bristle brush and a cleaner like Reshv8r.  If it’s just dirt and not stains it should clean up pretty good.  If you did want to paint them you use a paint like Angelus leather paint with the GAC-900 at a 1:1 ratio,  and to heat set.  you could use a hair drier for longer, but the best way it’s with a heat gun.  

[1vision33]

19 hours ago, str8up said:

did you use a paint sponge for the sock liner?

 

No, I just thinned it down a good amount and used the larger brush. 

[1vision33]

18 hours ago, blink3665 said:

My humble suggestion is to use gac900 for the sock liner. It's a great medium for fabric that will keep the liner soft!

Yea, I’m worried about the sock liner long term. I will take a look at what you’re suggesting, thanks! 

[newportbeach]

Thanks for the custom tips. I'm thinking of giving my whites a try.