PHOTOS: Accra TZ5 & TZ6 Shafts

1356710

Comments

  • mmack067mmack067 Members Posts: 702 ✭✭
    GolfDufr wrote:


    I am a high peak height, high spinning player. I had a fitting at my local Club Champion with the intention of finding a replacement shaft for my 7.5* G400 LST. I was playing the Tour 75 stiff, but was not happy with the tip section since it felt too "active" towards the bottom of the swing. I also couldn't swing above 80% without losing control of the club face. I tried HZDRUS Black 65 6.5 and the Accra TZ5 65 M5. Both shafts felt similar in stability but the TZ5 was a clear winner when it came to feel - can't stress enough how smooth the TZ5 is. The TZ5 dropped my peak height, kept my spin within a good range, I had better consistency with strike, and was able to get after a few of them without much instability. I'm not a big spender when it comes to clubs or shafts but I'll definitely be shelling out for this guy! Below are my stats with TZ5 (Blue) vs. my Tour 75 S (Red)







    Was the head at the same loft for these?
    Ping G400 LST - Copperhead 70TX
    '16 M1 15˚- Rogue Silver 70X
    Titleist 910H 17˚ -  Project X 7.0
    Srixon Z785 4i, Miura MC-501 5-PW - X100
    Vokey SM7 50F, 54S
    TM Milled Grind 58 SB
    TaylorMade Spider Tour Red Sightline

    Twitter-icon.png  lDLcKyO.png?1  


  • Smitty120Smitty120 MDMembers Posts: 442 ✭✭
    1st round with my TZ6 will be Thursday. Will report back with its performance compared to my gamers.

    M6 - Tensei Pro White 70TX

    M3 HL - Tensei Pro White 80TX

    P790 3 - ADDI 95X

    P750 4-PW - X-100 Tour

    MG Raw 52,58 - S-400 Tour

    Toulon Garage Atlanta

    TP5

  • evoviiiyouevoviiiyou evoviiiyou Members Posts: 1,999 ✭✭
    edited Feb 11, 2019 11:56pm #64
    Looking forward to this! My prediction is smoother, higher traj with similar spin. I go next week for my fitting with my club builder for the TZ6 in a Mizuno ST190. Stoked







    Spelling Edit

    Mizuno ST190 10.5/ Fuji Speeder TR 661S/ PURE Wrap BLK
    Mizuno ST190TS 15/ Fuji Speeder TR 757S/ PURE Wrap BLK
    Mizuno JPX FliHi 19/ Modus Tour 130S/ PURE Wrap WHT
    Taylor Made P790 4-PW Modus Tour 130S/ PURE Wrap BLK
    Mizuno S18 Wedges 50&56/ Modus 120S/ PURE Wrap BLK
    SeeMore M1B/ Satin Black Conti Golf/ Super Stroke Slim CC

  • GolfDufrGolfDufr Members Posts: 23 ✭✭
    mmack067 wrote:

    GolfDufr wrote:


    I am a high peak height, high spinning player. I had a fitting at my local Club Champion with the intention of finding a replacement shaft for my 7.5* G400 LST. I was playing the Tour 75 stiff, but was not happy with the tip section since it felt too "active" towards the bottom of the swing. I also couldn't swing above 80% without losing control of the club face. I tried HZDRUS Black 65 6.5 and the Accra TZ5 65 M5. Both shafts felt similar in stability but the TZ5 was a clear winner when it came to feel - can't stress enough how smooth the TZ5 is. The TZ5 dropped my peak height, kept my spin within a good range, I had better consistency with strike, and was able to get after a few of them without much instability. I'm not a big spender when it comes to clubs or shafts but I'll definitely be shelling out for this guy! Below are my stats with TZ5 (Blue) vs. my Tour 75 S (Red)







    Was the head at the same loft for these?




    Yes, same loft
  • DoucerDoucer Members Posts: 283 ✭✭
    Looking forward to the feedback Smitty!
  • GolfChannelGolfChannel Orlando, FloridaMembers Posts: 1,731 ✭✭
    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.
    Driver: He who shall not be named...
    3 Wood: Callaway Rogue w/Project X Blue Evenflow 75
    5 Wood: Callaway Rogue w/Project X Blue Evenflow 75
    Irons: Ping iBlade Nippon AWT 2.0 Stiff
    Wedges: Callaway MD3 50, 54, and Honma TW737 Forged 62
    Putter: Original Odyssey White Hot XG No. 7
    Ball: Srixon Z-Star 2018 (Yellow)
  • radimanradiman Members Posts: 4,678 ✭✭


    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    I agree. Only way I can try it is by shelling out the $$$ to get one here. The closest fitter is 4 hours away from here.
    Callaway Epic Flash 9* Tensei Pro Orange 70 TX
    Titleist 917 F3 15* Tensei Pro Blue 70 TX
    Callaway X-Forged UT 21* w/Motore Speeder TS 8.8 X
    Callaway 2016 Apex Pro 4-PW KBS 130X
    Taylormade Spider X Navy/White 35"
    Callaway MD3 54, 60, 64
    All sitting comfortably in my Sun Mountain Sync Cart Bag
  • mjbaker80mjbaker80 Members Posts: 616 ✭✭
    radiman wrote:



    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    I agree. Only way I can try it is by shelling out the $$$ to get one here. The closest fitter is 4 hours away from here.




    Radiman, you should contact JDs Clubs....he's out of MN and has a great relationship with ACCRA. I can't speak for him, but, I know he has demos that you could ask him about trying?! He's a great guy.



    **NOT trying to turn this into a sales pitch. Just trying to help a fellow Minnesotan! image/smile.png' class='bbc_emoticon' alt=':)' />
  • DoucerDoucer Members Posts: 283 ✭✭
    edited Feb 13, 2019 12:25am #70
    mjbaker80 wrote:

    radiman wrote:



    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    I agree. Only way I can try it is by shelling out the $$$ to get one here. The closest fitter is 4 hours away from here.




    Radiman, you should contact JDs Clubs....he's out of MN and has a great relationship with ACCRA. I can't speak for him, but, I know he has demos that you could ask him about trying?! He's a great guy.



    **NOT trying to turn this into a sales pitch. Just trying to help a fellow Minnesotan! image/smile.png' class='bbc_emoticon' alt=':)' />




    Bought many shafts from JD. He's fantastic. Just ordered a TZ6 from him.
  • radimanradiman Members Posts: 4,678 ✭✭
    mjbaker80 wrote:

    radiman wrote:



    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    I agree. Only way I can try it is by shelling out the $$$ to get one here. The closest fitter is 4 hours away from here.




    Radiman, you should contact JDs Clubs....he's out of MN and has a great relationship with ACCRA. I can't speak for him, but, I know he has demos that you could ask him about trying?! He's a great guy.



    **NOT trying to turn this into a sales pitch. Just trying to help a fellow Minnesotan! image/smile.png' class='bbc_emoticon' alt=':)' />




    I'm aware of him. Didn't realize that he's in MN though. I'll check it out and see. Thanks!
    Callaway Epic Flash 9* Tensei Pro Orange 70 TX
    Titleist 917 F3 15* Tensei Pro Blue 70 TX
    Callaway X-Forged UT 21* w/Motore Speeder TS 8.8 X
    Callaway 2016 Apex Pro 4-PW KBS 130X
    Taylormade Spider X Navy/White 35"
    Callaway MD3 54, 60, 64
    All sitting comfortably in my Sun Mountain Sync Cart Bag
  • radimanradiman Members Posts: 4,678 ✭✭
    mjbaker80 wrote:

    radiman wrote:



    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    I agree. Only way I can try it is by shelling out the $$$ to get one here. The closest fitter is 4 hours away from here.




    Radiman, you should contact JDs Clubs....he's out of MN and has a great relationship with ACCRA. I can't speak for him, but, I know he has demos that you could ask him about trying?! He's a great guy.



    **NOT trying to turn this into a sales pitch. Just trying to help a fellow Minnesotan! image/smile.png' class='bbc_emoticon' alt=':)' />




    I just reached out to him and it sounds like he would be willing to send me a demo shaft to try. If I am going to demo it, I am going to wait until the snow is gone so I can get a good amount of on course play in so I can really see how it plays. Thanks for the suggestion!
    Callaway Epic Flash 9* Tensei Pro Orange 70 TX
    Titleist 917 F3 15* Tensei Pro Blue 70 TX
    Callaway X-Forged UT 21* w/Motore Speeder TS 8.8 X
    Callaway 2016 Apex Pro 4-PW KBS 130X
    Taylormade Spider X Navy/White 35"
    Callaway MD3 54, 60, 64
    All sitting comfortably in my Sun Mountain Sync Cart Bag
  • mjbaker80mjbaker80 Members Posts: 616 ✭✭
    radiman wrote:

    mjbaker80 wrote:

    radiman wrote:



    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    I agree. Only way I can try it is by shelling out the $$$ to get one here. The closest fitter is 4 hours away from here.




    Radiman, you should contact JDs Clubs....he's out of MN and has a great relationship with ACCRA. I can't speak for him, but, I know he has demos that you could ask him about trying?! He's a great guy.



    **NOT trying to turn this into a sales pitch. Just trying to help a fellow Minnesotan! image/smile.png' class='bbc_emoticon' alt=':)' />




    I just reached out to him and it sounds like he would be willing to send me a demo shaft to try. If I am going to demo it, I am going to wait until the snow is gone so I can get a good amount of on course play in so I can really see how it plays. Thanks for the suggestion!




    Happy to help, fella! He's a very close friend of mine and one of the finest people I know. Our whole friendship was born off a purchase..... I got home and the LTD head I bought from him had a scratch under the wrapping (clearly from when it was built at the factory). I thought, "great, this guy is going to think I did it after removing the wrapping and won't let me return it." Many people would have just assumed that I scratched it and said "too bad so sad."



    JD didn't bat an eye, gave me a brand new LTD head and earned my trust for life. Complete class act about the whole deal. Stand-up guy. Stand-up builder.



    Glad he's sending one your way!



    Let us know your thoughts on the Tz!
  • radimanradiman Members Posts: 4,678 ✭✭
    mjbaker80 wrote:

    radiman wrote:

    mjbaker80 wrote:

    radiman wrote:



    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    I agree. Only way I can try it is by shelling out the $$$ to get one here. The closest fitter is 4 hours away from here.




    Radiman, you should contact JDs Clubs....he's out of MN and has a great relationship with ACCRA. I can't speak for him, but, I know he has demos that you could ask him about trying?! He's a great guy.



    **NOT trying to turn this into a sales pitch. Just trying to help a fellow Minnesotan! image/smile.png' class='bbc_emoticon' alt=':)' />




    I just reached out to him and it sounds like he would be willing to send me a demo shaft to try. If I am going to demo it, I am going to wait until the snow is gone so I can get a good amount of on course play in so I can really see how it plays. Thanks for the suggestion!




    Happy to help, fella! He's a very close friend of mine and one of the finest people I know. Our whole friendship was born off a purchase..... I got home and the LTD head I bought from him had a scratch under the wrapping (clearly from when it was built at the factory). I thought, "great, this guy is going to think I did it after removing the wrapping and won't let me return it." Many people would have just assumed that I scratched it and said "too bad so sad."



    JD didn't bat an eye, gave me a brand new LTD head and earned my trust for life. Complete class act about the whole deal. Stand-up guy. Stand-up builder.



    Glad he's sending one your way!



    Let us know your thoughts on the Tz!




    Oh, it will be a while. I am waiting until golf weather hits. At this pace, it will be mid to late April. Sounds like we will have well below average temps into March here.
    Callaway Epic Flash 9* Tensei Pro Orange 70 TX
    Titleist 917 F3 15* Tensei Pro Blue 70 TX
    Callaway X-Forged UT 21* w/Motore Speeder TS 8.8 X
    Callaway 2016 Apex Pro 4-PW KBS 130X
    Taylormade Spider X Navy/White 35"
    Callaway MD3 54, 60, 64
    All sitting comfortably in my Sun Mountain Sync Cart Bag
  • mjbaker80mjbaker80 Members Posts: 616 ✭✭
    don't remind me! It's awful!
  • KPH808KPH808 Participation Trophy ClubWRX Posts: 2,634 ClubWRX
    RonSwanson wrote:
    I'm hoping to test this soon and I have the Rogue 130 now, so I'll post results as soon as I have them.




    Curious on how these compare
    [font=arial,helvetica,sans-serif][font=times new roman,times,serif]Ping G400 LST 8.5* w/ Tensei Pro White 70 TX
    TM '17 M2 15* w/ Kurokage Dual Core 80 TX
    TM P790 UDI 2 w/ KBS Tour 130x
    Titleist 718 CB w/ KBS $ Taper 130x
    Fourteen Raw RM 22 50, 54, 58 w/ KBS 610 Tour Black Nickel
    Scotty Cameron Circle T Futura 6M
    [/font]
    [/font]
  • jbole267jbole267 CalgaryMembers Posts: 331 ✭✭
    Smitty120 wrote:
    1st round with my TZ6 will be Thursday. Will report back with its performance compared to my gamers.




    So.......? How did it go?
    Taylormade M6 - Accra TZ6 M5 65
    Callaway X-Hot 2 Hybrid
    Srixon Z745 Project x 6.0
    Titleist Vokey Sm7 50-54-58
    Taylormade Hi-Toe 64
    Taylormade Spider X
    Taylormade TP5X
  • DougNJDougNJ Members Posts: 224 ✭✭
    Thought I’d add a little here. I finally was able to put my TZ6 through a little testing on Trackman against my Tensei Pro Orange. It needs some more time in Trackman, which is set for Monday, but I would say that I’m impressed so far. Here’s a quick write-up. I’ll try to post all if the Trackman data that I have.



    This was done with a 2018 ProV1 and an M2 10.5 head set to neutral. Both shafts were put together by Will People’s (who’s the man as many of you know) and are cut to play 44.5”. Both are the 60g models in the TX for the PO and M5 for the Accra. Testing was all done indoors on Trackman. I’m a 2.3 index currently, like to cut the ball with the driver, and normally am around 112-114, though really sit right at or just above 112 the majority of the time. Finally, I’ve played the PO since March of last year and have been very happy with it.



    First of all they are both fantastic shafts. They definitely have a different feel to them, but I could easily play either one. I found the Accra to laugh about 1-2* higher on average and spin very similarly, on average it was 102 rpms higher in the Accra. The big thing there though was that I had a wider range of spin with the PO, as low as 1490 and as high as 2750 compared to the Accra range at 1790 and 2420 respectively. What was interesting to me was that I picked up 5 yards of carry and 2 mph of ball speed with the Accra compared to the PO 162 vs 164 average. I was a bit sore today from some gym time, but the ss average was identical at 111. The interesting thing to me was that my smash was so much better with the Accra. I averaged 1.48 with the Accra compared to 1.46 with the PO. I realize that hitting it more solidly will certainly increase but maybe I just respond better to this shaft. Finally I also found that the lateral dispersion was very similar. A bad shot is a bad s***. But what really impressed me was how the distance remained for the Accra even when I mishit it. With the PO the high to low distance was 36 yards compared to 21 yards with the Accra. Again hitting it more solidly definitely helped here.



    I’ll be doing some more testing on Monday and will try to post the Trackman numbers. I’d definitely say though that the Accra is something to definitely try if you can. I think I covered most of my thoughts and will try to post more next week.
  • Smitty120Smitty120 MDMembers Posts: 442 ✭✭
    edited Feb 15, 2019 9:35am #79
    Hey Guys. I am back with my brief initial thoughts on the ACCRA TZ6 65 M5 in my M6 Head. We had a "playable" day here so had to take advantage. Temperature was in the 50's, one of the normal courses I play was of course thawed and soaked. This was just on course thoughts and I have no monitor data yet.



    I have gamed a Tensei Pro White 70TX mainly since it was released. The Tensei is a great feeling Shaft for such a low spin monster. Playing the Accra at the same exact length and swingweight I did see differences. The ACCRA feels more stable, but not harsh in anyway. The handle feels a bit firmer than the Tensei but with a more active Tip in the Accra, it is a ball speed producer. When I say a more active tip, I in no way mean loose feeling or hard to control. I was hoping I did not make a mistake when going with the TZ6(higher) over the TZ5(lower), and I must say I did not. The TZ6 launches just about in the same window as my Tensei and by eye I would say spins a touch more but not by much at all is my prediction.



    The shaft just produced penetrating bombs for me today. With no exaggeration, I was past my normal summer distance areas today on multiple holes, which surprised me for sure. The best thing about this shaft for me is dispersion, It just goes straight for me. I would get loose shots with the Tensei with the softer handle. Winter swing is in full effect with driver clubhead speed at 110-113. I just am truly impressed as to what ACCRA has made with this shaft. I could easily sell my other shafts and be content after one round with it. It is that Good imho! Monitor Data to come along with more on course thoughts when the weather allows.
    Post edited by Unknown User on

    M6 - Tensei Pro White 70TX

    M3 HL - Tensei Pro White 80TX

    P790 3 - ADDI 95X

    P750 4-PW - X-100 Tour

    MG Raw 52,58 - S-400 Tour

    Toulon Garage Atlanta

    TP5

  • owu23owu23 Members Posts: 57 ✭✭
    Smitty120 wrote:


    Hey Guys. I am back with my brief initial thoughts on the ACCRA TZ6 65 M5 in my M6 Head. We had a "playable" day here so had to take advantage. Temperature was in the 50's, one of the normal courses I play was of course thawed and soaked. This was just on course thoughts and I have no monitor data yet.



    I have gamed a Tensei Pro White 70TX mainly since it was released. The Tensei is a great feeling Shaft for such a low spin monster. Playing the Accra at the same exact length and swingweight I did see differences. The ACCRA feels more stable, but not harsh in anyway. The handle feels a bit firmer than the Tensei but with a more active Tip in the Accra, it is a ball speed producer. When I say a more active tip, I in no way mean loose feeling or hard to control. I was hoping I did not make a mistake when going with the TZ6(higher) over the TZ5(lower), and I must say I did not. The TZ6 launches just about in the same window as my Tensei and by eye I would say spins a touch more but not by much at all is my prediction.



    The shaft just produced penetrating bombs for me today. With no exaggeration, I was past my normal summer distance areas today on multiple holes, which surprised me for sure. The best thing about this shaft for me is dispersion, It just goes straight for me. I would get loose shots with the Tensei with the softer handle. Winter swing is in full effect with driver clubhead speed at 110-113. I just am truly impressed as to what ACCRA has made with this shaft. I could easily sell my other shafts and be content after one round with it. It is that Good imho! Monitor Data to come along with more on course thoughts when the weather allows.




    That setup looks so sick!!!!
  • remarkc21remarkc21 Members Posts: 8 ✭✭
    Awesome comparisons and thanks to all for posting their experiences/data! I'm curious as to whether anyone has hit or is interested in the TZ5? Has this been revamped with as dynamic a feel as the TZ6 has been touted to have? The only Accra shaft I've ever hit was the CS1 70 M5 and it produced some great numbers for me during a fitting. Are these two profiles at all comparable between the CS1 and the TZ series? As someone with a +5-7AoA I actually need to work on getting my launch down a bit; while I'm very interested in the TZ6 and all the positive feedback I'm wondering if the TZ5 would be a better fit? Currently playing an Atmos Black 7x in my Epic, but have a new F9 coming with a PO 70tx for reference. Taking a bit of a flier on the PO 70tx and wondering if I need to do a TZ5 swap!
  • shellbmbshellbmb Members Posts: 241 ✭✭
    edited Feb 17, 2019 6:58pm #82
    I've read all I can about these shafts and am still confused as to which one might work better. Will try to get to a fitter if i can.



    SS is about 108, AOA is positive 4-5. Launch at 12-13 and spin is about 2600 so trying to bring that spin down just a bit. This is with a KK DC XT 60 TX in a 2016 M2 head. They say the TZ6 is a "spin killer" but it launches higher. Curious if the TZ5 might be a better option. Any thoughts?
    M4 Kuro Kage XD 60 TX
    Taylormade M2 15 Kuro Kage DC XM 70 TX
    Titeist 818h2 19 Atmos Blue
    Srixon z785 KBS Tour V
    Ping Glide Stealth 54/60
    TM Spider Sightline Face Balanced
  • DoublebuckDoublebuck Doublebuck Members Posts: 1,155 ✭✭
    TZ6/TZ5 shafts are the best shafts ever perhaps in the history of golf shafts. They are going to be #1. On tour and wherever else. Try them and you will open your wallet. Don't try them still open your wallet. If they were on OEM lists they would be #1 but they're not. Half of the tour players may have these in their drivers by the end of the year. All other shafts are crap, these are the real deal. If our friends at Toll Bros say anything to the contrary, they are asleep at the wheel. Makes me want to listen to some great music.
  • DoublebuckDoublebuck Doublebuck Members Posts: 1,155 ✭✭


    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.



    I really wish Accra was widely available outside just club fitters, there stuff is so good, but I respect their model.




    Then they wouldn't be Accra...possibly the best.
  • PatsNationPatsNation Members Posts: 1,504 ✭✭
    Anyone compare this to Hzrdus Black?
  • Judge440Judge440 Titleist will always have my heart. ClubWRX Posts: 2,080 ClubWRX
    If I like AD-IZ which one would I most likely want to try? TZ5 or TZ6? Thanks.
    Titleist TS2 9.5* - Fujikura Atmos TS Black 6X
    Titleist 917F2  15* - Fujikura Atmos TS Blue 7X
    Titleist 818H1 19* - Fujikura Atmos TS Blue 8X
    Titleist 718 AP2 - PX LZ 6.5
    Titleist SM7 Raw - 50.12F | 54.14F | 60-12D - TI S400
    SC Tour Rat


    WITB Link

    https://www.instagram.com/judge44o/
  • Crooksc17Crooksc17 Members Posts: 770 ✭✭
    It seems that these are on the heavier side compared to other manufacturers. For example, the PO 70 is 74g while the TZ6 75 is 80g. Are people finding that they fit better with a lower weight range in these shafts since their raw weights are heavier?
  • jbole267jbole267 CalgaryMembers Posts: 331 ✭✭
    Doublebuck wrote:
    TZ6/TZ5 shafts are the best shafts ever perhaps in the history of golf shafts. They are going to be #1. On tour and wherever else. Try them and you will open your wallet. Don't try them still open your wallet. If they were on OEM lists they would be #1 but they're not. Half of the tour players may have these in their drivers by the end of the year. All other shafts are crap, these are the real deal. If our friends at Toll Bros say anything to the contrary, they are asleep at the wheel. Makes me want to listen to some great music.




    I am very interested as to if this will be the case! Seems pretty interesting so far!



    Going to try and get one I guess.
    Taylormade M6 - Accra TZ6 M5 65
    Callaway X-Hot 2 Hybrid
    Srixon Z745 Project x 6.0
    Titleist Vokey Sm7 50-54-58
    Taylormade Hi-Toe 64
    Taylormade Spider X
    Taylormade TP5X
  • Smitty120Smitty120 MDMembers Posts: 442 ✭✭
    I have gamed mid 70g shafts in my driver for a long time. I went with the TZ6 65 which is 72g uncut. The weighting of the shaft feels great. Not light feeling at all.

    M6 - Tensei Pro White 70TX

    M3 HL - Tensei Pro White 80TX

    P790 3 - ADDI 95X

    P750 4-PW - X-100 Tour

    MG Raw 52,58 - S-400 Tour

    Toulon Garage Atlanta

    TP5

  • MattM97MattM97 Members Posts: 331 ✭✭
    Tested out the TZ5 65 M4 this past weekend in a G410 plus in a fitting I was finishing up for my driver. Before this the G400 SFT with a Tour Z Xtreme 465 M4 was gonna be my setup. The TZ5 felt extremely smooth and similar to the Tour Z Xtreme as this will be replacing that.



    For me I really enjoy the shaft but opting not to get the TZ5 in my driver as the Ping Tour works really well for me in the G410 and the fitters advised there was no need for me to buy the TZ5 if I was going for the G410. If I was going with the G400 then it was going to be ideal to get my launch and spin down where the Ping Tour shaft was giving me optimal numbers in the G410.



    I'd strongly suggest a fitting if possible, this shaft could find it's way into my driver in a year or two or in a 3W.
    WITB - Lefty
    Driver: << Testing in Progress >>
    ulAVttu.png - F7 3W - 15.5D - Tensei Blue 60S
    0kZapzq.png- 816 H1 - 21 - Diamana S+ 70R
    Tghg11i.jpg - Z585 4-7 / Z785 8-PW - AMT White Tour S300
    Wedges:
    • cKIO92v.png- MD3 - 51
    • LhHjFh3.png - Glide 2.0 Stealth - 56
    • LhHjFh3.png - Glide - 60

    Putter: q8m5K5T.png - E-3
    taylormade-small.jpg - TP5x or urp3gG8.png - MTB Red
    LhHjFh3.png - Pioneer
  • Crooksc17Crooksc17 Members Posts: 770 ✭✭
    Are people finding the shafts true to flex or otherwise? Have had great success with PO 70TX and wondering if M5 flex in TZ6 is comparable flex wise. SS is 105-108 mph and have a smooth transition. Thanks
Sign In or Register to comment.