M5 driver guys...talk about it

 getitdaily ·  
getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
Joined:  in Equipment #1

What loft?
What shaft?
What's your swingspeed?
What setting?

10.5
Still figuring out shaft - 125msi rogue tour s, 661 speeder evo2 x, 661 speeder evo3 s
107-108
Neutral with rogue, one in middle and one in heel with evo2, haven't fully tested the evo3 yet.

Super low spin head so had to go 10.5. Compared it head to head with last year's m4 (8.5). M4 is faster. M5 gets more distance and was more accurate. More testing to come.

Posted:
«13
3

Comments

  • justasgoodjustasgood Without Tempo, you are just a hacker.  3050WRX Points: 604Handicap: I.Q.Members Posts: 3,050 Titanium Tees
    Joined:  #2

    M5 Tour
    9*
    XTorsion Copper Mamba 70x
    Weight in center track front and end of track
    Neutral setting
    SS 108-112

    I have sold all of my other drivers because of this one.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
    Joined:  #3

    On -, @justasgood said:

    M5 Tour
    9*
    XTorsion Copper Mamba 70x
    Weight in center track front and end of track
    Neutral setting
    SS 108-112

    I have sold all of my other drivers because of this one.

    You must be a super high spin guy?

    Posted:
  • Kale_mKale_m  2286WRX Points: 419Members Posts: 2,286 Platinum Tees
    Joined:  #4

    Thinking of maybe getting one at a demo sale to try over the winter

    Will not following here

    Posted:
    Ping g410 LST 9* weight in toe, PW70tx 
    3wood — TBD 
    Ping g410 3hy at 20*
    Callaway Apex MB Raw TIX100
    Callaway md4 52/56
    Tm hi toe 60
    Oddessey stoke lab 10s 
  • Kale_mKale_m  2286WRX Points: 419Members Posts: 2,286 Platinum Tees
    Joined:  #5

    Correction “will be following”

    Posted:
    Ping g410 LST 9* weight in toe, PW70tx 
    3wood — TBD 
    Ping g410 3hy at 20*
    Callaway Apex MB Raw TIX100
    Callaway md4 52/56
    Tm hi toe 60
    Oddessey stoke lab 10s 
  • PhilomathesqPhilomathesq Legal Eagle 637WRX Points: 834Handicap: My tolerance for stupidity.Members Posts: 637 Golden Tee
    Joined:  #6

    Club: M5
    Loft: 9*
    Shaft: Oban Kiyoshi Tour Limited 70 O5 (79 grams)
    Swingspeed: 110mph average
    Setting: Neutral (both in center track, front/rear)

    These settings seem to be working well, but I am going to experiment with moving the weights into the heel as I seem to be fading the ball much more with this driver.

    Posted:

    Driver: Cobra King Speedzone 9* w/ Fujikura Atmos TS Black 7X
    3-Wood: TaylorMade M5 15* w/ Oban Devotion 8 O5
    Hybrid: PXG 0317X Gen 2 19* w/ Oban Kiyoshi Purple Hybrid O5
    4i - 9i: NLG 902 w/ DG TI X100
    Wedges: Jaws MD5 46/10S, 50/10S, 54/8C, 58/8W, all w/ DG TI S400
    Putter: Lajosi Custom DD201WB w/ Stability Shaft

  • Kale_mKale_m  2286WRX Points: 419Members Posts: 2,286 Platinum Tees
    Joined:  #7

    On -, @Philomathesq said:

    Club: M5
    Loft: 9*
    Shaft: Oban Kiyoshi Tour Limited 70 O5 (79 grams)
    Swingspeed: 110mph average
    Setting: Neutral (both in center track, front/rear)

    These settings seem to be working well, but I am going to experiment with moving the weights into the heel as I seem to be fading the ball much more with this driver.

    M5 sits open quite a bit. Try adjusting the loft a few clicks higher

    Posted:
    Ping g410 LST 9* weight in toe, PW70tx 
    3wood — TBD 
    Ping g410 3hy at 20*
    Callaway Apex MB Raw TIX100
    Callaway md4 52/56
    Tm hi toe 60
    Oddessey stoke lab 10s 
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • jll62jll62 Minneapolis 2360WRX Points: 603Handicap: +2.4ClubWRX Posts: 2,360 ClubWRX
    Joined:  #8

    M5 9 deg
    Tensei Orange Proto (V2) 70TX
    Swingspeed 106-110
    Weights: One weight back in draw, one all the way forward. 5g lead tape on heel.
    Shaft: two clicks towards higher on a 2deg sleeve

    I struggled with the M5 at first because of its fade bias when the weights are neutral. After changing the weight setup and closing the face down a bit (was quite open), it became very playable. Consistent 2-3mph ball speed gains over my M3 (measured on FlightScope), with no change in accuracy. It's been a great driver this season.

    Posted:
    TaylorMade SIM 8.0, Diamana Kai'li 60S, 44.75"
    TaylorMade M5 Rocket 3, Tensei Blue X, 42.5"
    TaylorMade P-790 UDI 2, Aerotech SteelFiber i95 S
    TaylorMade P750 3-6, KBS C-Taper S+ (soft-stepped 1x)
    TaylorMade P7TW 7-PW, KBS C-Taper S+ (soft-stepped 1x)
    TaylorMade MG2 52, DG S400 Tour Issue
    TaylorMade Hi-Toe 58, DG S400 Tour Issue
    TaylorMade Tour Proto milled Juno, 34"
    TaylorMade TP5

    jll62's WITB
  • handyquacks17handyquacks17 Massachusetts 88WRX Points: 50Members Posts: 88 Fairways
    Joined:  #9

    M5 9 degree
    HZRDUS Smoke 60 S
    SS 105
    Weights: Both Up front
    Standard loft

    Took me about 2 rounds to get used to this (Came from 915 d2). I would try to stay away from putting the weights in the draw setting from my experience.

    Posted:
  • getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
    Joined:  edited Nov 6, 2019 #10

    On -, @jll62 said:

    M5 9 deg
    Tensei Orange Proto (V2) 70TX
    Swingspeed 106-110
    Weights: One weight back in draw, one all the way forward. 5g lead tape on heel.
    Shaft: two clicks towards higher on a 2deg sleeve

    I struggled with the M5 at first because of its fade bias when the weights are neutral. After changing the weight setup and closing the face down a bit (was quite open), it became very playable. Consistent 2-3mph ball speed gains over my M3 (measured on FlightScope), with no change in accuracy. It's been a great driver this season.

    We're close to opposites on loft setup. I had to deloft a 10.5 one click and used the weight to help close the face in the swing. But, depending on shaft, the one back weight has to be put in the center slot and another shaft the weight has to go in draw.

    I'm beginning to be a bigger fan of the adjustable drivers because of this...

    I also had to have hit the lottery with my m4. It's fast...m4 at 8.5 was giving me 159-161 ballspeed on 107-108 clubhead. M4 lofted up to 9.25 was giving 158-159.

    M5 10.5 lofted down to 9.75 is giving 154-155...but is longer on the course.

    Posted:
  • JoeFrigoJoeFrigo  324WRX Points: 139Handicap: 6.4Members Posts: 324 Greens
    Joined:  #11

    M5 9* , played in upright (lie) setting
    UST Mamiya Lin-Q 6F5 (60g X)
    110 avg SS
    One weight 1 notch above lowest spin setting, one weight in toe/ fade bias, 2 strips lead tape next to center track on fade side

    Without a doubt the best driver ive played. There are better ball speeds out there driver wise, but the combo of launch/ spin/ dispersion has made this my favorite club. Definitely staying in the bag for next year

    Posted:

    TM SIM MAX 9* Ventus Black 60x
    TM SIM 3w 17* Tensei Pro Orange 70tx
    TM P790 UDI Tensei Pro Orange 90tx
    Mizuno MP 20 MMC 4 - P Aerotech Steelfiber FC 115 F5
    Mizuno T20 52,56,60 Aerotech Steelfiber 110 F5
    Mizuno M-Craft 1

  • KMeloneyKMeloney  4999WRX Points: 297Handicap:[email protected] 7Members Posts: 4,999 Titanium Tees
    Joined:  #12

    Any of you folks go to the M5 from the M1? I'm still with the original '16 M1. Would love to hear about any gains in distance/feel/accuracy. TIA

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
    Joined:  #13

    On -, @KMeloney said:

    Any of you folks go to the M5 from the M1? I'm still with the original '16 M1. Would love to hear about any gains in distance/feel/accuracy. TIA

    Don't threadjack...

    Posted:
  • DREWZER300DREWZER300  82WRX Points: 54Handicap: 2.9Members Posts: 82 Fairways
    Joined:  #14

    What loft? 9 degree
    What shaft? HZRDUS Smoke 70X
    What's your swingspeed? 112-115
    What setting? Loft turned down to 8 degrees, weights are positioned one slightly forward of middle and the other a couple clicks towards fade

    First round with this driver I was in love. Sound and feel are amazing. Longest and most consistent I have played in a while.

    Posted:
    Taylormade M5 Ventus Black 7X
    Taylormade M5 3W Ventus Black 8X
    Taylormade M4 3H KBS Tour Prototype 95X
    Mizuno JPX 919 HMP 4-PW KBS C-Taper 130X
    Mizuno S18 52/56/60 KBS C-Taper 130X
    Taylormade Spider Tour Black
    Bridgestone Tour BX/Taylormade TP5X
  • JJK947JJK947  3241WRX Points: 269Members Posts: 3,241 Titanium Tees
    Joined:  #15

    ^Slightly muted feel and lower spin than the '16 M1 for me. Both are great heads but I'd take the M2 from that era for a little more forgivness and not lose anything.

    Mine is 460 head 9*
    Tensei Pro Orange 60 TX
    SS is currently 110
    1 click towards lower and factory weight setting

    This setup is a mid flight, low spin fade machine for me. My draw swing is dead straight and my normal driver swing produces a 5 yard fade. I may play with settings next year to allow for getting a draw more easily. But I drove the ball great this year knowing that it is not possible for me to hook this club. Worst case is straight pull that doesn't cut back.

    Posted:

    Taylormade M5 (9) - Tensei Pro Orange 60
    Taylormade M3 T3 (14) - Tensei Pro Orange 70
    Taylormade M3 5W (19) - Tensei Pro Orange 80
    Srixon Z945 3-PW - DG Tour X100
    Mizuno MP T20 52.09 - DG Tour S400
    Mizuno MP T20 58.04 - DG Tour S400
    Scotty Cameron Studio Style NP2

  • getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
    Joined:  #16

    On -, @DREWZER300 said:

    What loft? 9 degree
    What shaft? HZRDUS Smoke 70X
    What's your swingspeed? 112-115
    What setting? Loft turned down to 8 degrees, weights are positioned one slightly forward of middle and the other a couple clicks towards fade

    First round with this driver I was in love. Sound and feel are amazing. Longest and most consistent I have played in a while.

    What launch are you producing? I tried the 9.0 head and had several launch around 8-9 degrees and not many that were even near 12 degrees. Had to go 10.5 to get launch up to optimal numbers (12-15) consistently.

    Posted:
  • KMeloneyKMeloney  4999WRX Points: 297Handicap:[email protected] 7Members Posts: 4,999 Titanium Tees
    Joined:  #17

    On -, @getitdaily said:

    On -, @KMeloney said:

    Any of you folks go to the M5 from the M1? I'm still with the original '16 M1. Would love to hear about any gains in distance/feel/accuracy. TIA

    Don't threadjack...

    You're right. My bad.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
    Joined:  #18

    On -, @JJK947 said:

    ^Slightly muted feel and lower spin than the '16 M1 for me. Both are great heads but I'd take the M2 from that era for a little more forgivness and not lose anything.

    Mine is 460 head 9*
    Tensei Pro Orange 60 TX
    SS is currently 110
    1 click towards lower and factory weight setting

    This setup is a mid flight, low spin fade machine for me. My draw swing is dead straight and my normal driver swing produces a 5 yard fade. I may play with settings next year to allow for getting a draw more easily. But I drove the ball great this year knowing that it is not possible for me to hook this club. Worst case is straight pull that doesn't cut back.

    What are your avg launch and spin numbers?

    Posted:
  • SUPERGSUPERG  412WRX Points: 235Members Posts: 412 Greens
    Joined:  #19

    10.5
    Testing out DF 70 TX, Pro White 70 TX, and trusty PX HC yellow 76 6.5 (currently in the head now)
    119 MPH
    One weight at the back of the vert track, then the other in the max fade track.

    My fav driver of all time ,feel, distance, spin all optimal. Been toying with newer shafts to get the flight down a bit, but may have to experiment with a 9.5 head. Same as OP had to go with 10.5 because I hit down on it and needed more LA.

    Posted:

    Taylormade M5 - Diamana DF 70 TX

    Taylormade Jetspeed 3HL - Aldila Tour Green 95 TX

    Taylormade SLDR Rescue 19* - Fuji Fuel 95X

    Mizuno MP 18 SC 4-PW KBS C Taper 130 X

    Vokey SM7 50 54 60 DG S400

    PING Vault Anser 2

  • DREWZER300DREWZER300  82WRX Points: 54Handicap: 2.9Members Posts: 82 Fairways
    Joined:  #20

    On -, @getitdaily said:

    On -, @DREWZER300 said:

    What loft? 9 degree
    What shaft? HZRDUS Smoke 70X
    What's your swingspeed? 112-115
    What setting? Loft turned down to 8 degrees, weights are positioned one slightly forward of middle and the other a couple clicks towards fade

    First round with this driver I was in love. Sound and feel are amazing. Longest and most consistent I have played in a while.

    What launch are you producing? I tried the 9.0 head and had several launch around 8-9 degrees and not many that were even near 12 degrees. Had to go 10.5 to get launch up to optimal numbers (12-15) consistently.

    Only had it on a monitor one time. Over 15-20 shots the averages were around 12-13 degree launch angle, 2000 RPM spin, 168mph ball speed. I have always been a high launch, high spin guy. Probably why I love this driver so much.

    Posted:
    Taylormade M5 Ventus Black 7X
    Taylormade M5 3W Ventus Black 8X
    Taylormade M4 3H KBS Tour Prototype 95X
    Mizuno JPX 919 HMP 4-PW KBS C-Taper 130X
    Mizuno S18 52/56/60 KBS C-Taper 130X
    Taylormade Spider Tour Black
    Bridgestone Tour BX/Taylormade TP5X
  • TheSphynxTheSphynx All Quiet on the Googley Eyed Front Las Vegas 1534WRX Points: 195Handicap: 2Members Posts: 1,534 Platinum Tees
    Joined:  #21

    •M5 tour 9° one “click” towards lower from the upright setting
    •Rogue silver 130 70tx tipped 1”
    •Heavier weights in the head. (13.5g I think) One weight all the way in draw one in the middle of the track
    •118mph

    Posted:
  • getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
    Joined:  #22

    On -, @DREWZER300 said:

    On -, @getitdaily said:

    On -, @DREWZER300 said:

    What loft? 9 degree
    What shaft? HZRDUS Smoke 70X
    What's your swingspeed? 112-115
    What setting? Loft turned down to 8 degrees, weights are positioned one slightly forward of middle and the other a couple clicks towards fade

    First round with this driver I was in love. Sound and feel are amazing. Longest and most consistent I have played in a while.

    What launch are you producing? I tried the 9.0 head and had several launch around 8-9 degrees and not many that were even near 12 degrees. Had to go 10.5 to get launch up to optimal numbers (12-15) consistently.

    Only had it on a monitor one time. Over 15-20 shots the averages were around 12-13 degree launch angle, 2000 RPM spin, 168mph ball speed. I have always been a high launch, high spin guy. Probably why I love this driver so much.

    Those numbers scream "cannon"...the way this head wants to go straight, I can see why you love the driver...

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • VNutzVNutz  6601WRX Points: 582Members Posts: 6,601 Titanium Tees
    Joined:  #23

    M5 10.5
    EvenFlow White shaft, stiff flex
    1* up, first weight all the way to front, second 3/4 or so to the back.
    SS 105-110

    Haven't been on a monitor so I don't know where my ball speed and spin numbers are. Distance is adequate; I don't think I'm necessarily bombing the ball with this club or setup, but that could be me dealing with a back that's getting more cranky by the day as well. But I do feel like my accuracy off the tee is better than it has been in years, to the point that I'm not as concerned with the distance or perhaps lack there of. Perhaps this offseason I'll get it on a monitor and check on things, but I can live with the distance due to the increased control and forgiveness. I really have to put a bad swing on this thing to get poor results.

    Posted:
  • JJK947JJK947  3241WRX Points: 269Members Posts: 3,241 Titanium Tees
    Joined:  #24

    On -, @getitdaily said:

    On -, @JJK947 said:

    ^Slightly muted feel and lower spin than the '16 M1 for me. Both are great heads but I'd take the M2 from that era for a little more forgivness and not lose anything.

    Mine is 460 head 9*
    Tensei Pro Orange 60 TX
    SS is currently 110
    1 click towards lower and factory weight setting

    This setup is a mid flight, low spin fade machine for me. My draw swing is dead straight and my normal driver swing produces a 5 yard fade. I may play with settings next year to allow for getting a draw more easily. But I drove the ball great this year knowing that it is not possible for me to hook this club. Worst case is straight pull that doesn't cut back.

    What are your avg launch and spin numbers?

    When I'm hitting a mid-flight fade that I go for most of the time, it's in the 11-12 launch and 2200-2500 spin range. So not ideal on a launch monitor but it gets me the best real world results on a consistent basis. If I need more I can change tee height and ball position to get into the 13/2000 range.

    Posted:

    Taylormade M5 (9) - Tensei Pro Orange 60
    Taylormade M3 T3 (14) - Tensei Pro Orange 70
    Taylormade M3 5W (19) - Tensei Pro Orange 80
    Srixon Z945 3-PW - DG Tour X100
    Mizuno MP T20 52.09 - DG Tour S400
    Mizuno MP T20 58.04 - DG Tour S400
    Scotty Cameron Studio Style NP2

  • BrizamBrizam Junkie  995WRX Points: 148ClubWRX Posts: 995 ClubWRX
    Joined:  #25

    M5 9 turned down 1*
    Tensei Pro orange 70tx
    Both weights forward.
    SS 100-105

    Posted:
  • getitdailygetitdaily  3178WRX Points: 395Handicap: +.5Members Posts: 3,178 Titanium Tees
    Joined:  #26

    On -, @Brizam said:

    M5 9 turned down 1*
    Tensei Pro orange 70tx
    Both weights forward.
    SS 100-105

    With your swing speed, is that an optimal setup? Do you hit a good number of knuckle balls? Or is your AoA about 9 degrees up?

    What are your launch and spin numbers?

    Based on what I saw from testing that head and seeing that you're playing a TX flex shaft, gotta believe you're hitting a good number of drives that are in the 1700 spin range.

    Posted:
  • BrizamBrizam Junkie  995WRX Points: 148ClubWRX Posts: 995 ClubWRX
    Joined:  #27

    On -, @getitdaily said:

    On -, @Brizam said:

    M5 9 turned down 1*
    Tensei Pro orange 70tx
    Both weights forward.
    SS 100-105

    With your swing speed, is that an optimal setup? Do you hit a good number of knuckle balls? Or is your AoA about 9 degrees up?

    What are your launch and spin numbers?

    Based on what I saw from testing that head and seeing that you're playing a TX flex shaft, gotta believe you're hitting a good number of drives that are in the 1700 spin range.

    I hit up about 6-7, I don't find that I get many knuckle balls. I don't have the speed for the X its more about controlling launch and spin. There are swing flaws in play that I don't have the time to fix. Just using what gets me the best number on the scorecard at the end of the round. I tend to prefer the feel of stiffer flex shafts. I have tried going down to an Stiff in the driver and my dispersion suffers to much to warrant chasing 5yds of gained distance.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • cjpssecjpsse  61WRX Points: 57Members Posts: 61 Bunkers
    Joined:  #28

    M5 9* turned up to 10.5
    Tensei Pro Blue 70TX
    Both weights back
    SS 118-125
    I have a slightly negative AoA, hence the setup. But, best feeling driver I've had and great ball flight. As long as this one doesnt crack (RIP M2), it'll be in the bag a while.

    Posted:
    Taylormade M5 10.5 - MCA Tensei Pro Blue 70TX
    OG Ping Rapture 14 - MCA Diamana RF 70TX
    Taylormade GAPR Lo - MCA OT Tour 110 X
    Taylormade P760 - Modus 130X
    Titleist SM7 52 & 56 - DG AMT White
    Scotty GoLo 5 
  • hurley999shurley999s  625WRX Points: 297Members Posts: 625 Golden Tee
    Joined:  #29

    I picked up a M5 9.0 used head and it may be a dud...

    Put one weight in draw setting, other neutral in the back, and lead tape to get to 202-204g to match my M4 weight.

    First time using it last week, I panned on gaming it in a casual round, but warming up on the range was nothing but knuckleballs. Sounded weird (very muted) and felt weird. Not a single shot had a decent ball flight.

    Immediately scrambled back to the trunk to pop the M4 head back in to play because I thought it must have been cracked somewhere.

    Took some time to examine the M5 post-round and I wasn’t able to find anything visually. But I haven’t been to the range or out to play since, so to be continued...really curious how this plays out

    Posted:
  • VolnutVolnut  20WRX Points: 29Members Posts: 20 Bunkers
    Joined:  #30

    On -, @hurley999s said:

    I picked up a M5 9.0 used head and it may be a dud...

    Put one weight in draw setting, other neutral in the back, and lead tape to get to 202-204g to match my M4 weight.

    First time using it last week, I panned on gaming it in a casual round, but warming up on the range was nothing but knuckleballs. Sounded weird (very muted) and felt weird. Not a single shot had a decent ball flight.

    Immediately scrambled back to the trunk to pop the M4 head back in to play because I thought it must have been cracked somewhere.

    Took some time to examine the M5 post-round and I wasn’t able to find anything visually. But I haven’t been to the range or out to play since, so to be continued...really curious how this plays out

    I had a similar experience. Got fitted in August, M5 9°, Hazrdus Smoke shaft. Hit the ball well, finding a lot of fairways. Well the top of the head developed a crack. Took it back to Edwin Watts and they swapped out a new head, no problem. Played 2 rounds with it and it was nothing but knuckle balls. All of a sudden I couldn't hit this thing. Last swing the ball rolled out to about 210 down the middle. I looked at the club face and the ball mark was dead center. I can't understand how I hit the sweet spot, the ball was in the center of the fairway and only went 210. I'm a low teens handicap and typically carry my driver around 260.

    At this point, I lost faith in the M5 between the one I hit well cracking on top and the replacement being a dud (at least for me). Edwin Watts has the 90 day play guarantee and I happened to have about 2 weeks remaining on it so I went back and went it a totally different direction. Back to hitting 280ish with rollout.

    I'm not sure what happened in my experience with the Taylormade. It seems a lot of people love their M5 but I can't say I'm one of them. Also, kudos to Edwin Watts. They took care of me and their customer service was great.

    Posted:
  • GolfWRXGolfWRX Warning Points: 0  11 Members Posts: 11 #ad
    Joined:  ...

    Advertisement
  • TherealpatgilesTherealpatgiles  618WRX Points: 192Handicap: 13Members Posts: 618 Golden Tee
    Joined:  edited Nov 7, 2019 #31

    M5 9.0
    Played 1 click lower 8.25
    Weights 1 forward center. 1 draw (13.5 gram both weights)
    Ventus 70x 44.5 inch playing length
    Swing speed 112
    Trackman averages
    10.2 launch angle
    2100 spin
    75ft high.

    Posted:
    Taylormade m5 9 ad gp 7x
    Epon af901 19 modus 120
    Nike vapor pro combo 3 iron
    Epon af 503 4-w modus 120s
    Epon tour 50 55 60 modus w
    Epon i33 rose gold putter
3

Leave a Comment

Rich Text Editor. To edit a paragraph's style, hit tab to get to the paragraph menu. From there you will be able to pick one style. Nothing defaults to paragraph. An inline formatting menu will show up when you select text. Hit tab to get into that menu. Some elements, such as rich link embeds, images, loading indicators, and error messages may get inserted into the editor. You may navigate to these using the arrow keys inside of the editor and delete them with the delete or backspace key.