First equipment purchase of 2018?

14567810»

Comments

  • AES83AES83 Members Posts: 13
    Did a fitting for a driver last week.

    I hit them all. Cobra F8, M3/M4, PingG400 etc. But the driver that suited me best was Callaway Rogue. And today it arrived and I went to the store to get it. Can’t wait until the snow disappears in a few months. :-)
  • PunkGolfWRXPunkGolfWRX Members Posts: 103 ✭✭
    Rory4Pres wrote:


    What was or do you think will be your first equipment purchase of 2018?




    Callaway MD4 gap wedge with Recoil shaft
    DR: Callaway Rogue Sub Zero 9.° - Project X EvenFlow BLACK Hand Crafted 6.5
    FW: TaylorMade M3 15° - Mitsubishi Tensei CX Blue 65 S
    HY: Adams XTD Ti 18° - Mitsubishi Tensei CX Pro Blue 80HY S (Bench)
    2i: TaylorMade P790 UDI - Project X HZRDUS Black 6.5
    4-PW: Callaway Apex CF16 Black - UST Mamiya Recoil ES 780 F4 (Black)
    GW: Callaway Mack Daddy 4 Matte Black 50°/10° S Grind - UST Mamiya Recoil 110 F4
    SW: Callaway PM Grind 19 Tour Grey 54°/14° - Project X Catalyst 6.0
    LW: Callaway PM Grind 19 Tour Grey 60°/12° - Project X Catalyst 6.0
    P: Scotty Cameron H18 Squareback 34”
    B: TaylorMade TP5x
  • Jab3384Jab3384 Members Posts: 641
    2016 M1 3wood with an X-stiff Rogue Silver and a BB-6x for my 2016 M2 driver.



    Should be set for the year (month).
  • Mookie91Mookie91 Posts: 1,560 ✭✭
    First purchase Wilson C300 Forged, 2nd TaylorMade M4, 3rd was Cleveland CBX 54, 58....who knows what #4 will be maybe a Versa Tanks Cruisder V-Line
    TaylorMade M4 9.5 Project X HZRDUS Black 75 6.5
    TaylorMade M2 2016 HL Project X HZRDUS Black 65 6.5
    TaylorMade GAPR Lo 19 Project X HZRDUS Black 85 6.5
    Bridgestone J15 DPF 4 Iron DGS300 Pro
    Wilson C300 Forged 5-PW X100
    Cleveland CBX 54 & 58 S400
    Odyssey Works Tank Cruiser #7 38"
  • kmay__kmay__ Members Posts: 209 ✭✭

    kmay__ wrote:


    New Triton driver on clearance price at GT, to upgrade finally from my r580 with 35-r flex shaft lol, figured this would be an upgrade that yields decent results. Also picked up a Cobra baffler t-rail 3 wood off kijiji in great shape for 50 bucks, and I'm likely going to end up back at GT to grab a Cleveland RTX 60 degree wedge to upgrade from the power bilt lob I'm using now.




    What was the price on the Triton? Online they're asking $220 + tax, around here it's still $250 + tax




    Sorry man yea it was 219+ tax.
    TM 17' M2 9.5*
    Cobra Bio-Cell 16.5*
    PING G30 4 22*
    TM R11 5 - PW
    Mizuno MP-T5 50*, 54*
    Callaway PM Grind 60* (the greasy Phil)
    SC studio select Newport 2 mid-slant
  • USAF Retired E7USAF Retired E7 Finnish American Posts: 305 ✭✭
    19 degree M2
    M2 Driver, 16 Degree and 19 degree
    PXG 0311 4-Pw
    Vokey 50 and 56
    Odyssey O Works #7, red
  • seslwr1seslwr1 Posts: 111 ✭✭
    Used Cobra F7 3/4 hybrid.
    [font=helvetica, arial, sans-serif]Callaway Rogue 9* w/ Aldila Rogue Silver Stiff[/font]
    [font=helvetica, arial, sans-serif]TourEdge Exotics CBX 15* 3-Wood w/ HRZDUS Yellow 75 6.0[/font]
    [font=helvetica, arial, sans-serif]Cobra King F7 3-4 Hybrid w/ Fujikura Pro 75h Stiff[/font]
    [font=helvetica, arial, sans-serif]Mizuno JPX-EZ Forged w/ Project X LZ Stiff[/font]
    [font=helvetica, arial, sans-serif]Ping Glide 2.0 50*, 54*, & 58*[/font]
    [font=helvetica, arial, sans-serif]Scotty Cameron X7[/font]
  • McBirdieMcBirdie Members Posts: 13
    seslwr1 wrote:
    Used Cobra F7 3/4 hybrid.
    I feel ya i picked up a new cobra F7 2/3 hybrid on golf discount for $139 just last week.



  • jimmymac50jimmymac50 Members Posts: 54 ✭✭
    Went crazy. Epic irons (5-AW) with Recoil shafts. Also M4 driver. Only live once.
  • Matt023Matt023 Members Posts: 41 ✭✭
    Since November Callaway mb18 7-pw, to replace Mizuno mp-h4 Taylormade milled grind wedges 54,58 to replace Cleveland tour action wedges, Piretti blade putter. The Cleveland 58 will be a fight as for some strange reason I just hit this club well.
  • Tight-rightTight-right Posts: 89 ✭✭
    Hoping I won't be buying anything this year!



    Maybe I'll replace my 6 year old irons, or 4 year old driver. Doubtful.





  • drumdude96drumdude96 Members Posts: 846
    IIRC, my first purchase of the year was an Adams Fast 12 LS driver that looks almost new and was only $40. I figured "what the ****?" For $40, it's worth a shot. Since then, I've bought a new Callaway X2 Hot 3 deep, a set of taper tip C-Taper pulls, and a dozen parallel tip C-tapers from RBG. The ho in me wants to buy some new shafts to try in fairway woods, but I should probably try the ones I already have first.
    PING G400 Max 10.5° Aldila Rogue Silver 125 MSI TX 44.75"
    Taylormade 2017 M1 15° 3 wood Diamana 'ahina 70 S
    PING G25 20° Hybrid TFC 189 S
    Titleist 915H 24° Dynamic Gold S300
    Titleist 915H 27° Dynamic Gold S300
    Mizuno MP-57 6-PW Dynamic Gold S300
    PING Glide 54° SS KBS 610 125
    PING Glide 58° TS KBS 610 125
    Inazone XC-7 33"
  • SavageCySavageCy Members Posts: 132 ✭✭
    C Taper Lites. Just picked my irons up this morning. Virtual round tomorrow. Actual round ??? **** you winter!
    TS3 9.5* w Evenflow T-1100 White 6.0
    '17 M1 15* w Hzrdus Black 6.0
    716 T-MB 3 w AD 95X
    716 T-MB 4 w C Taper Lite X
    916AP2 5-9 w C Taper Lite X
    SM6 47* SM5 51* 55* 59* w C Taper Lite X
    8802 w SS Pistol GT 2.0/TM DJ Spider w SS Pistol GT 2.0/Studio Stainless Newport 2 w SS Pistol GT 2.0
  • theclafftheclaff Members Posts: 18
    I just purchased a Titleist 818 H2 2 Hybrid 17 degrees with the Atmos Black x-stiff shaft! I can't wait until it comes in!
    [font=arial,helvetica,sans-serif]Titleist 915D3 - 8.5 Degrees - Diamana White Board 80G - X Stiff
    Titleist 915F 3 Wood - 16.5 Degrees - Diamana White Board 80G - X Stiff
    Titleist 712 AP2 - 3-PW - True Temper X100 Shafts
    Titleist SM5 Wedges - 51, 55, 59 Degrees - X100 Black Onyx Shafts
    Edel E-1 Torque Balanced Putter (Black, 35 Inches)
    Titleist Pro V1 Golf Ball[/font]
  • golf1836golf1836 Chopper Members Posts: 147 ✭✭
    Bettinardi h2 wedge
  • BC33BC33 Divot taker Posts: 443 ✭✭
    Rogue 3 wood with Even Flow Blue 75 from Discount Dan's.



    Hit both the SZ and the standard and liked the feel of the standard better although the ball speed numbers were higher with the SZ. Don't necessarily want a 5 yard difference between my driver and 3 wood.
    10.5 Callaway Epic Flash Sub Zero Tensei Blue 65
    Callaway Rogue 3 wood Even Flow Blue 70
    Callaway XHot Pro 5 Wood Project X LV
    Apex Pro '16 4-PW Project X 6.0
    Callaway MD Forged 50, 54
    MD PM Grind 58 and 64
    Odyssey MXM 9 HT
    TaylorMade TP5X
  • jwb10jwb10 Major Winner MarsPosts: 889 ✭✭
    Rory4Pres wrote:


    What was or do you think will be your first equipment purchase of 2018?


    Seriously, that was too long and too many skinny boxes ago
  • 1970.gpp1970.gpp Unregistered Posts: 1,813 ✭✭
    edited Feb 24, 2018 #289
    Rory4Pres wrote:


    What was or do you think will be your first equipment purchase of 2018?


    10* PING G SF Tec driver
    Post edited by Unknown User on
  • mjl2012mjl2012 Posts: 190 ✭✭
    edited Feb 23, 2018 #290
    Ap3 irons
  • LONGBALL777LONGBALL777 Posts: 103 ✭✭
    Toulon Indianapolis Putter.
  • linkerpanlinkerpan ClubWRX Posts: 1,419 ✭✭
    G400 Max with the XTorsion Copper! 56g




    Great shaft with the worst name ever. Guess their next one will be the Blkmailed
    M4 460, 8.5 Rogue 70
    Tee EX10 Beta 13, 18. Hzrdus Yellow
    M2 Hy, 22 with AD DI 85S
    M2 Hy, 25 with S+ 90S
    P790 6-AW, Nippon 105S
    Vokey SM6 56/14, 60/07
    Scotty Cameron Mil Spec 350
    Taylor Made TP5 balls
    Bushnell V2 range finder
    Titleist Lightweight Cart Bag

    WITB Link
  • SourpussSourpuss Members Posts: 700 ✭✭
    mizuno mp-18, so buttery smooth and consistently awesome! i think i found my soulmates
14567810»
Sign In or Register to comment.