ENTER: Bettinardi The Hive Experience Giveaway! Enter here!

[eddiebigeddie]

First off, thank you Wrx and Bettinardi for this opportunity.

 

If I was the lucky winner...it would be a flowneck BBZero for sure. I’ve been thinking of this for a while. On the back of the neck would be stamped deadly, in the cavity I would have a large zombee stamp and a large skull with x eyes stamp. Bumpers would be clean, the sole would have Bettinardi across the front entire length of the sole followed by BBZero underneath that but smaller. On the face I would have a larger enfuego stamp with x eyes (because the putter is going to be deadly on fire). Would have the fit face, clean flange, topline sightline, all blacked out putter with exception of some lime green paint fill on certain stampings. Headcover would be one that has the stampings listed above (dark grey material, black embroidery with lime green x eyes). The name of the putter...Deadly Weapon!

 

Thanks.

 

https://bettinardi.com/hive-archive/skull-and-bones-dass-bbzero-flow-tour-dept/

 

[SetTheBarrHigh]

Everything about the prototype below is amazing. Very unique standings on the sole and the Texas Tea finish is gorgoues. I’m in the “Less is more” camp, so no additional stamps needed. Might change the paintfil to some green and blue action.

 

https://bettinardi.com/hive-archive/bb39-stinger-prototype/

 

Thanks Bettinardi and WRX! Always such amazing opportunities!

[phi482]

BBZERO for me in carbon steel with a flow neck, pipe, or midslant. I love the gold finish with a bee in the cavity with purple / white / black paint. I think the fly face would be my choice there.

 

https://bettinardi.com/hive-archive/bbzero-flow-dass/

 

Thanks for putting this together!

[tombergey]

QUEEN B 8 PLUMBERS NECK RAW

 

 

This putter would definitely go west with me. Awesome look!

Would love to have a cactus print on the bottom of it... and my favorite saying...

"This is so in"

 

Thanks!

[Swoff57]

BB56 tour prototype in 35”. I would have ”GO UTES!!” stamped along the sides of the raised center line in white. As well as on the sole above not for resale. I love the look and set up of this putter.

 

https://bettinardi.com/hive-archive/bb56-tour-prototype-red/

[Gstew1930]

https://bettinardi.com/hive-archive/bbzero-soft-carbon-stinger/

 

I’d go with the BBZero soft carbon stinger, all black with red lettering with my initials stamped in the toe. Twisty neck if possible. I would instantly putt like Spieth lol

[oldhamer25]

https://bettinardi.com/hive-archive/bbzero-soft-carbon/

 

I have always loved the bb zero head and carbon metal. Would love the linked putter with the only change being a little splash of orange paint fill.

[MM29]

KOOL-AID DASS SS3

 

As shown would be amazing.

 

https://bettinardi.com/hive-archive/kool-aid-dass-ss3/

[rymail00]

copper or amber oxide finish qb9 or qb6 as of right now... not sure on stamping but would love to have3 sight lines

 

https://bettinardi.com/hive-archive/kool-aid-qb9-dass/

https://bettinardi.com/hive-archive/queen-b-6-shorty-plumbers-neck-raw/

[Always_rough]

Tour Halfmoon Dass is the model I would select.

 

https://bettinardi.com/hive-archive/tour-halfmoon-dass/

 

First, I'd get rid of the sight line, and put a small black honeycomb on the top, similar to a dot, to show where middle is. Then, the putter would either get a brushed look, or a darker color to reduce glair. Next, where that sightline used to be, I'd fill it in with a honeycomb pattern that wrapped around to the bottom of the putter. The Hive stamp would be towards the heel, in red, while more honeycomb or possible a small bee would be where Bettinardi is normally written on the back of the putter. The faced would be milled.

[munchies2x]

Would love the BB8 Tri Betti Dass. It is perfect, though if I have to modify it, I would change the color to yellow.

[tnrts345]

Absolutely love the look of the BBZERO Soft Carbon! I would love it without the sight line but would add white paint fill the all the lettering and stamps. I would also put my initials on the face and add the Kool Aid face on the sole

 

https://bettinardi.c...ro-soft-carbon/

[torrejuan]

https://bettinardi.com/wp-content/uploads/2017/11/BB0-Tour-Logos-Face.jpg?gid=3

 

Gold Flame BBZero DASS with bee logos and some names on the bumpers.

[dodgyman]

I've got enough anser style putters, and would love to look for something a little different like a mallet style.

 

The WCW BB34 looks great,

 

https://bettinardi.com/hive-archive/wcw-bb34-dass/

 

with obvious room for customization of the logo/design below if allowed. If I could customize it, I may do a Hawaii theme, something to remind me of the warm climate during the winter months.

 

Great idea for a contest

[hark114]

I would go with a bb2 and just have my kids initials on it

[ESP]

BB8

 

https://bettinardi.com/hive-archive/skull-and-bones-bb8-tour/

 

Dark finish with black shaft. Minimal stamping for a clean look. Awesome looking putter!

[rocketmutt]

FCB tour,

 

I would keep it very traditional and minimal with the design. change the colors around to another suiting option.

[BabyFAcedAssassin]

BBZero with a twisty neck. clean with a cavity bee stamp.

[Oaks]

BBZero Flow Tour DASS - That being said - I would go into my fitting with an open mind and choose the putter that makes the most putts for me!

 

Stampings and Engravings would be some combination of family's initials. Overall the putter would be simple, clean. FIT Face and smooth sole.

[gioguy21]

https://bettinardi.com/hive-archive/bbzero-hive-only-twisty-neck/

 

Bbzero twisty plumbers neck - stainless polished, torched neck, fit face over mini honeycomb mill, bullet sole, simple B in the cavity left of center and on the heel of the face. Sole would have "hive" logo, and specs of putter.

 

Thanks betti and wrx for this opportunity!

[93civiccpe]

I really like the Tour Dass Minovai head shape

 

https://bettinardi.com/hive-archive/tour-dass-minovai/

 

I would see if they could do one with an amber oxide finish. On the two legs that extend back I would have "Aim Small" stamped into the top and "Miss Small" stamped into the bottom. I would see about having a shamrock milled into the face and potentially a line from Caddyshack stamped into the bottom.

[Whodey-85]

https://bettinardi.c...queen-b-8-tour/

 

Welded Flow neck, sight got, Black Oxide finish and black shaft. Bee, Kool-Aid and Blues Bother stamps if it would fit on the sole. Paint fill, not sure on that would have to let that come to me when I was there. Plus I have been rolling the other guys for 10+ years now, would love to try something different.

[ladahl]

Queen B 6 Shorty Plumbers Neck Raw

 

I've always loved this shape/design. This looks PERFECT!

 

I would let their guys do whatever they wanted to it (use their artistic license) - tweak as they need to fit my stroke, stamping, grip. Such a bad a** looking stick.

[psapitch13]

2018 iNOVAi 5.0

 

I would get a high shine finish, matte on the top and letters filled with Neon Green with flat cat grip.

[J13]

This would be pretty cool to do plus get some deep dish while i'm there :D

 

I like something along the lines of the Stinger Bee BBZero Flow DASS.

 

Customize it to start with fly mill the face, color scheme i like, maybe blue, if possible micro honeycomb milling the sole of the putter, then stamp J13 and DASS on the bumpers. On the sole of the putter stamp multiple times dancing "Bettinardi Tour Stamp"

[mlwenzlick]

DASS FCB CATAMARAN TOUR KOOL-AID

 

 

https://bettinardi.com/hive-archive/dass-fcb-catamaran-tour-kool-aid/

 

 

I would add to this one by giving it a twisty neck (like the Dreamweaver/44 Mag), give it a rainbow finish with a kool aid man on the back by the toe and a stinger on the face by the toe. White paint fill on all. Hard to change perfection.

[SoonerChris]

HMM

 

https://bettinardi.c...lf-moon-mallet/

 

DASS, raw, possibly flamed. Hand stamped.

[golframfan]

BBzero flowneck in soft carbon LETSGOVCU stamped on the sole Betty hand stamped on the back Probably something on the front face too with some cool milling. May even kick the current betty out of the bag.

[tekin112000]

https://bettinardi.com/hive-archive/bbzero-dass/

 

BB Zero with custom paint that matches the head cover

 

Hand stamped with my initials

 

Thanks for a great give away

[islande393]

Without a doubt, it's the BBZero with Copper plugs. If it only had a midslant neck 1/2 offset it would be the perfect putter

 

https://bettinardi.com/hive-archive/copper-insert-dass-bbzero/

 

For Stamping, I've gotten really sentimental with my twins so I'd have out "short" names for them stamped on the bumpers

 

"COOP" on toe bumper with a sky blue paint fill

"KATE" on heel bumper with a light pink paint fill

 

I'd keep the same face stamp as it is on this putter but change the paint fill to be sky blue/pink

 

Sole stamp "Made by RJB"

 

Would be my absolute dream putter