PXG Gen 3... Jan 2020 (ST, Gen 3 T and P Photos added Page 13)

[BCC1898]

> @mrmikeac said:

>

>

 

Are these $650 an iron too?

 

 

[Shakespeare]

> @mrmikeac said:

>

>

 

Ill take a set

[Zigzog]

These look interesting, bet they feel pretty decent when hit out of the middle!

[lostbeachbum]

 

[Kevinnz]

I thought gen1 0311T was one of the best in feel and consistency until I tried the gen2, sweet spot was about twice the size, but the rest doesnt really warrant a full set change.

Looking forward to gen3 though I jst went n got a set of mp20.

[jholz]

They look very nice, but I ain't going to be swinging them anytime soon. $$$$$$$$$$$

[SEP1006]

> @Shakespeare said:

> > @mrmikeac said:

> >

> >

>

> Ill take a set

 

Those are sweet, if they hit / feel as good as the Gen 2's and look like that then I'm in for sure!!!!

[TheMoneyShot]

These look great!

[ShankLife]

Want to see the bottom. Thumbs up to PXG for taking another step forward.

[Therealpatgiles]

5200 a set???

[Buzzkill]

Just got a PXG hero offer on 0211 irons for 95 each - great deal but I don't need anything!

 

[Shakespeare]

> @Therealpatgiles said:

> 5200 a set???

 

Might be close...they looked milled..on the bottom at least...will be interesting

[TheMoneyShot]

> @Therealpatgiles said:

> 5200 a set???

 

That’s pretty steep..

[TheMoneyShot]

Sounds like the new line will be priced like the STs.

[K13]

> @Therealpatgiles said:

> 5200 a set???

 

Is this a guess or did you see it somewhere?

 

The ST blades are fully milled, which is how they justify the higher price point. The description of Gen 3 earlier in this thread describes them as forged, so I'd be surprised if they carried the same increased pricing.

 

[ssfranny]

> @mrmikeac said:

>

>

 

So are they milled like the ST?

[Therealpatgiles]

> @K13 said:

> > @Therealpatgiles said:

> > 5200 a set???

>

> Is this a guess or did you see it somewhere?

>

> The ST blades are fully milled, which is how they justify the higher price point. The description of Gen 3 earlier in this thread describes them as forged, so I'd be surprised if they carried the same increased pricing.

>

 

Here's directly off the pxg website about the ST blades.

 

Triple forged to tighten the grain structure and 100% CNC milled to perfect every surface, curve and angle, these solid-bodied tour blades are designed for better golfers. So forged then milled?

But then again it says

 

[K13]

> @Therealpatgiles said:

> > @K13 said:

> > > @Therealpatgiles said:

> > > 5200 a set???

> >

> > Is this a guess or did you see it somewhere?

> >

> > The ST blades are fully milled, which is how they justify the higher price point. The description of Gen 3 earlier in this thread describes them as forged, so I'd be surprised if they carried the same increased pricing.

> >

>

> Here's directly off the pxg website about the ST blades.

>

> Triple forged to tighten the grain structure and 100% CNC milled to perfect every surface, curve and angle, these solid-bodied tour blades are designed for better golfers. So forged then milled?

> But then again it says

>

 

Gah - I see what you're saying now. Hopefully they don't start going that high across the board but we'll see.

[binknrum]

I actually hit the 0311P and 0311T Gen 3 last weekend. Both had the 0311ST look to them per the pictures already posted. Performed slightly better than the Gen 2 head for me. Felt great just like the Gen 2. Mid January release & ship date. As I recall, it’s priced similar to the Gen 2. Great sticks, just more than I’m willing to spend with the other offerings on the market.

[SEP1006]

> @binknrum said:

> I actually hit the 0311P and 0311T Gen 3 last weekend. Both had the 0311ST look to them per the pictures already posted. Performed slightly better than the Gen 2 head for me. Felt great just like the Gen 2. Mid January release & ship date. As I recall, it’s priced similar to the Gen 2. Great sticks, just more than I’m willing to spend with the other offerings on the market.

 

 

What would you say makes them perform slightly better? The Gen 2's are so awesome in feel and forgiveness. If the Gen 3's are equally as good I will get them for sure. Love the looks of these and have emailed my fitter about them as well.

[TheMoneyShot]

> @binknrum said:

> I actually hit the 0311P and 0311T Gen 3 last weekend. Both had the 0311ST look to them per the pictures already posted. Performed slightly better than the Gen 2 head for me. Felt great just like the Gen 2. Mid January release & ship date. As I recall, it’s priced similar to the Gen 2. Great sticks, just more than I’m willing to spend with the other offerings on the market.

 

Did you hit the ST model at all? If so, how did they feel?

[HercNav]

I hit the Gen 3P's today — felt great. Performance was similar...marginally better on center strikes. Didn’t get punished as much as I deserved on mishits.

 

Heard that the pricing will be similar to Gen2 irons; in the realm of $400-$425 per club.

[tmb guy]

how was the look at address and shape changes toplines etc as well as any reduced offset in the p especially in the longer irons

 

[ssfranny]

> @HercNav said:

> I hit the Gen 3P's today — felt great. Performance was similar...marginally better on center strikes. Didn’t get punished as much as I deserved on mishits.

>

> Heard that the pricing will be similar to Gen2 irons; in the realm of $400-$425 per club.

 

Will they be available right away with Heroes? My guess prob not but will have Gen2 pricing at $175-200 a club.

[ssfranny]

Also dint think will be all milled like ST they say milled on hosel where the 0311P gen3 said forged

[Therealpatgiles]

> @ssfranny said:

> Also dint think will be all milled like ST they say milled on hosel where the 0311P gen3 said forged

 

Technically the milled st is forged 3 times. Or 5 times. Their site says both.

[mrmikeac]

 

[DZ973]

Just got done hitting And ordering the G3T’s same shaft as my current setup G2 0311P. The new ones are sick. The raised area in the center of the back actually extends the cavity. That extra “pocket” contains extra COR2. Also, they are using two different polymers in the cavity. The first one closer to the head is softer than the COR2 behind it.

 

Ball speeds were 2-3 MPH faster than my G2s, was also hitting TOWERING 7is on Trackman approx 105’ high, land angle around 49*.

[dxdgenert]

> @DZ973 said:

> Just got done hitting And ordering the G3T’s same shaft as my current setup G2 0311P. The new ones are sick. The raised area in the center of the back actually extends the cavity. That extra “pocket” contains extra COR2. Also, they are using two different polymers in the cavity. The first one closer to the head is softer than the COR2 behind it.

>

> Ball speeds were 2-3 MPH faster than my G2s, was also hitting TOWERING 7is on Trackman approx 105’ high, land angle around 49*.

 

What’s the price per club?

[DZ973]

> @dxdgenert said:

> > @DZ973 said:

> > Just got done hitting And ordering the G3T’s same shaft as my current setup G2 0311P. The new ones are sick. The raised area in the center of the back actually extends the cavity. That extra “pocket” contains extra COR2. Also, they are using two different polymers in the cavity. The first one closer to the head is softer than the COR2 behind it.

> >

> > Ball speeds were 2-3 MPH faster than my G2s, was also hitting TOWERING 7is on Trackman approx 105’ high, land angle around 49*.

>

> What’s the price per club?

 

$425 Per