Mizuno 2019

[evoviiiyou]

I never minded the blue in the JPX900 or the ST180, just like the black to carbon better. I have a prediction based off success of this model line of course.

 

2017-2018 Mizuno Blue Crown >>>>to 2019 Gloss Carbon/Black >>>>to 2020 or 2021 Matte-Carbon/Black...

[trhode]

The 190 sounds way better than the 180. That's more of a difference for me than anything. The 180 sounded like an empty trash can.

[TaylorRenfroe]

The new mizuno woods are nice. Look really good at address and sound great. Just didn't have as much distance for me as the TS3.

[bostonbrahmin]

While the forums were down both Mizuno and Golfnation Instagram accounts posted pics of what I assume are the MP20 with the heads blurred out.  Pros testing now so if we could just somehow get a leaked pic...

[BlackM00Nlight]

The ST-190 drivers sit scarily wide open to me. I have a fitting Saturday with a Mizzy rep so curious if I can close the face a smidge and keep performance where I need it to be! 

[reider69]

BlackM00Nlight said:

The ST-190 drivers sit scarily wide open to me. I have a fitting Saturday with a Mizzy rep so curious if I can close the face a smidge and keep performance where I need it to be! 

I was fitted to 8.5 degrees and toe up 1 degree.  Face does not sit open at all.  If you play it at 10.5 it does appear open a smidge imo.  I played my first round with mine today in wind and cold.  Driver is hot off the face and forgiving on shots off center.  Huge improvement over my F7 but this one was fit to me so comparison is probably not fair.  I love the KK70X shaft and they tipped an inch(my first tipped driver) making it super stable.  Very excited to use my ST190 this summer.

[tbowles411]

My new bag should hopefully arrive in a couple weeks.  The 190 and G are the truth.  I just need more directional help!

 

[Stanks]

Always excited to hear about possibly new Mizuno irons. I am still very very happy with my 919T set. They're taking care of me very well. 

 

[mpmz71]

I'm looking at reshafting my ST190 to a Atmos Tour Spec Blue 6S.    I've tried making the TS Black work, but I'm just not getting the height I need.  I'm also hitting it on the heel side of the face a lot.  I'm thinking about tipping it 1/2" and playing it at 44.5".  What would that do to the swing weight?  Will it be considerable that I will need to make it up with lead tap or hot melt?

[BogeyPutt34]

I recently purchased a set of jpx900 forged irons and I can say they’re one of the best feeling irons I’ve hit with some forgiveness. Can’t  wait to get them dialed in!

[518TitleistX]

ST190G is proving to be a great stick for me. Got on Trackman today for the first time with it with ProV1's. Club is 45", set to 7*, Tensei Pro Orange 70Tx. 114mph Club head speed, 164 ball speed, 14* launch, 1980 spin. Was 33*F outside and I was hitting this thing places I could've only dreamed of hitting my 917D2 last year.

[BlackM00Nlight]

I was just fit into the 190G myself today. Tensei White 70X with both weights in the heel. Carrying 285 and total 310. 2,500 rpm (side spin adds a little). This thing is a monster and can’t wait until it Friday.

[BlackM00Nlight]

Anyone know if the new Mizuno JPX Fli-Hi can be adjusted for loft?

[evoviiiyou]

> @BlackM00Nlight said:

> I was just fit into the 190G myself today. Tensei White 70X with both weights in the heel. Carrying 285 and total 310. 2,500 rpm (side spin adds a little). This thing is a monster and can’t wait until it Friday.

 

Strong numbers! Nice work getting it dialed in!

[BlackM00Nlight]

Any talk of a new hybrid since the CLK is 2 years old? Want to get the CLK but would hate for the 190 hybrid to drop later this summer like Ping did with the G400 Max.

[MillerLowLife]

> @BlackM00Nlight said:

> The ST-190 drivers sit scarily wide open to me. I have a fitting Saturday with a Mizzy rep so curious if I can close the face a smidge and keep performance where I need it to be! 

 

Did you think that on both models? So far I like the look at them at address as I've held the 190 but haven't had the chance to hit one yet. I really dislike how the 180 looks at address but other then that, it's a great driver. Really hoping when I test both and the 3wood they are good fits and I can pull the trigger.

[BlackM00Nlight]

> @MillerLowLife said:

> > @BlackM00Nlight said:

> > The ST-190 drivers sit scarily wide open to me. I have a fitting Saturday with a Mizzy rep so curious if I can close the face a smidge and keep performance where I need it to be! 

>

> Did you think that on both models? So far I like the look at them at address as I've held the 190 but haven't had the chance to hit one yet. I really dislike how the 180 looks at address but other then that, it's a great driver. Really hoping when I test both and the 3wood they are good fits and I can pull the trigger.

 

Yeah, perhaps the 190G isn't as open as the regular but they do sit open.

[BigHook25]

> @BlackM00Nlight said:

> > @MillerLowLife said:

> > > @BlackM00Nlight said:

> > > The ST-190 drivers sit scarily wide open to me. I have a fitting Saturday with a Mizzy rep so curious if I can close the face a smidge and keep performance where I need it to be! 

> >

> > Did you think that on both models? So far I like the look at them at address as I've held the 190 but haven't had the chance to hit one yet. I really dislike how the 180 looks at address but other then that, it's a great driver. Really hoping when I test both and the 3wood they are good fits and I can pull the trigger.

>

> Yeah, perhaps the 190G isn't as open as the regular but they do sit open.

 

I don't think they sit open or very open. I think they just look that way because of the contrast of the black top to the silver face.

[blackngold_blood]

> @BigHook25 said:

> > @BlackM00Nlight said:

> > > @MillerLowLife said:

> > > > @BlackM00Nlight said:

> > > > The ST-190 drivers sit scarily wide open to me. I have a fitting Saturday with a Mizzy rep so curious if I can close the face a smidge and keep performance where I need it to be! 

> > >

> > > Did you think that on both models? So far I like the look at them at address as I've held the 190 but haven't had the chance to hit one yet. I really dislike how the 180 looks at address but other then that, it's a great driver. Really hoping when I test both and the 3wood they are good fits and I can pull the trigger.

> >

> > Yeah, perhaps the 190G isn't as open as the regular but they do sit open.

>

> I don't think they sit open or very open. I think they just look that way because of the contrast of the black top to the silver face.

 

Silver face?

I am a little concerned about the sitting open look after buying a 190 sight unseen though. I don't like the right side of the course and try to eliminate it as much as possible. Here is hoping it sits square or at least not too extreme!

[BigHook25]

> @blackngold_blood said:

> > @BigHook25 said:

> > > @BlackM00Nlight said:

> > > > @MillerLowLife said:

> > > > > @BlackM00Nlight said:

> > > > > The ST-190 drivers sit scarily wide open to me. I have a fitting Saturday with a Mizzy rep so curious if I can close the face a smidge and keep performance where I need it to be! 

> > > >

> > > > Did you think that on both models? So far I like the look at them at address as I've held the 190 but haven't had the chance to hit one yet. I really dislike how the 180 looks at address but other then that, it's a great driver. Really hoping when I test both and the 3wood they are good fits and I can pull the trigger.

> > >

> > > Yeah, perhaps the 190G isn't as open as the regular but they do sit open.

> >

> > I don't think they sit open or very open. I think they just look that way because of the contrast of the black top to the silver face.

>

> Silver face?

> I am a little concerned about the sitting open look after buying a 190 sight unseen though. I don't like the right side of the course and try to eliminate it as much as possible. Here is hoping it sits square or at least not too extreme!

 

Sorry, forgot the drivers were black, but the fairway woods have chrome/silver face.

[Wdwfreak]

All in on this! Reposting from the equipment forum, mostly want to do this to show everyone that you can't overlook this driver this year

 

Beat out everything for me, the Epic Flash and Cobra f9 were close but the regular ST190 9.5 turned down to 8.5 beat everything with Tensei Pro White 70TX. Going through a couple swing changes and my numbers aren't perfect but I'm so impressed and it's $150 cheaper than the Epic, Tmags or Titleist, that's REALLY impressive.

 

Really excited to get this going and beyond the numbers winning it's easily the best looking and sounding driver out this year imo. A total surprise from start to finish but it's the real deal, everyone should try this.

 

 

[Warrick]

New JPX FliHi #5, identical specs to 919F 4 iron, which is the spot I am filling, LZ 115.

 

[tbowles411]

That looks really good. I was wondering what the top view looked like. That should definitely be more forgiving than any iron, but not as big as the corresponding hybrid. I hope there is no performance drop off.

[reider69]

That Fli-hi looks crazy easy to hit. Most everyone I play with could benefit from a few of these in the bag. Most amateurs can't hit their irons worth a darn past the 7...6.

[Warrick]

Weather took a dip, but should be able to get it on course Sunday and test it out

[BlackM00Nlight]

Yeah not wanting to get out there by the looks of this morning. Comfy blustery day.

[Golfingfanatic]

Love the look of those FliHis and the fact that so many steel shafts are offered. I might grab the 19* and the 22* later this year.

[Warrick]

I played the 22 today, seems like it will be a good fit, easy to hit, fits the gap.

[evoviiiyou]

> @Warrick said:

> I played the 22 today, seems like it will be a good fit, easy to hit, fits the gap.

 

Hows that trajectory compared to your various Mizzy 4 irons?

 

[Warrick]

Definitely higher, but I need that, do not hit the ball real high. I play LZ 6.0 in irons, got a 5.5 for this