TaylorMade Golf - ASK US ANYTHING

[bombs]

ETA on the P760 replacement?

 

[Elee913]

What would be the closest stock shaft you have to an Oban Isawa Red 55 Regular? Thanks!

[jackbauer]

Can you pretty please bring back the RAC Forged CB irons and make a left-handed version??

[Hammer22]

They are available from Billy Bob's in San Diego. Just added a 19g weight to my Max in place of the stock 16g.

I ended up needing the 19g weight + 4g of lead tape so I could hit a D3. Got creative with two pieces of tape so it looks decent, and you really can't even tell it's on there.

[Mahamilto]

what is more forgiving, the M5 or the new Sim?

what about the M5 with both weights in the back (one in max fade, one in max draw) vs the Sim?

just curious because I read the MOI of the SIM is higher than the M5, but can’t confirm that, and especially can’t confirm that against the M5 in its most forgiving weight setup.

Thanks!

[OspreyCI]

What length you playing yours at? I have a 19 gram on the way and hoping 44.75” with a GP TV Cord brings me in at D2/3.

BTW, sweet job with the lead tape.

[evoviiiyou]

Fitment looks nice Hammer...I was lucky that my club maker only needed 2.5 grams of hot melt to the head to get me to D2 on my scale at a little over 44.75" with an Accra TZ6 65M4 shaft. Just got back from hitting it and its so much easier than my ST190 and as long I would say from the range eyeball. Cheers brother

[Hammer22]

Guess I forgot to mention that: mine’s -1” (44.75”). Also, I have the Ventus w/VeloCore transplanted from another driver, so just an FYI for anyone using the TM version (non-VeloCore) - there is a weight difference between the two shafts. The VeloCore shaft, cut to the same length as the TM version is about 5g lighter. Since I don’t have hot melt, adding the extra lead tape was what it took to be at D3, and that’s using a 47g MCC grip.Great driver for sure. I liked the ST190 head, but hated the Atmos shaft. Thought it was a bad idea to unload the G400, but since I ended up with the new Max, I’m completely happy. Hit yours well!

[Crankenstein]

To bridge my SIM 10.5* to my Mizuno HMP 5 iron... can I just go SIM Ti 5wd set to 17* plus SIM MAX Rescue 22*? Will this gap ok? Driver swing speed is 100, 5 iron is around 82. Stiff shafts in everything. What shafts do you recommend in both the 5wd and rescue, given my swing speeds? Thanks!

[evoviiiyou]

thanks Hammer same to you and still love my ST190 with the Fuji Speeder TR 661 S in her. She is long just not as forgiving as the SIM max for sure. Great reading more driver SW mod posts from you. Always making it happen to get that swing weight proper! Well done

[Floris]

Serious question: I've tried to get fit into a stiffer shaft for woods and the driver. All but one of the fitting locations I've called told me that you aren't supplying them with 'that much options'. It seems that the amount of options available on demo-days differ from what is available at the fitters and I sincerely wonder why. (The one that did have more options somehow fits using rangeballs, that's not something I wish to do.)

As you can see in my signature I have two fairwaywoods en route, but as I have only been able to use rangeballs I am not 100% confident this truly is the right match for me.

[br61]

.

[br61]

.

[BiggErn]

Every time I visit the TM site I get a pop up to enter my email for a chance to win a driver or some other product. I’ve never heard of anyone winning. There was a similar promotion with a set of P7TW irons being the prize.

[kearneyhill]

I want to echo this as well. You can see in my sig that I don’t have any TM sticks in the bag. Congrats to TaylorMade for doing this on GolfWRX! Well done!

[Frisco Kid]

What are the differences between the Sim gear that DJ and other pros use versus what is available for retail? Are they completely different animals or fairly similar?

[BlackSpiderman]

Will you be releasing a black version of the current P790 irons.

[BiggErn]

Where can I get a P790 hat like DJ wore last week? I don’t care which driver emblem is on the opposite side.

[bogeypro]

Is @TaylorMade Golf not involved in this thread anymore? Haven't seen them answer in a while...

[br61]

@TaylorMade Golf
Couple questions, when will the MG2 hi bounce wedges be available? I see it in your custom pages saying available in spring 2020.
I'm wondering if TM could produce a limited or special run of centershafted long putters similar to Scott McCarron's, I would buy couple if it's is available. I'm sure Scott would love having few backups.

[Guest]

Pushing my new sim hybrids

I just recently bought a new set of sim max irons with the Recoil 460 shaft. This was fitted using Mizuno's iron fitting tool. My set also included a M6 10.5 driver (adjusted to face open 1 setting) with Atmos Orange shaft. Loving my last hybrid, I bought a sim hybrid #3, #4 and #5 with stock Ventus Blue shaft. I have quite a steep swing path and swing approx 85 mph(driver). I tend to hit all my shots quite straight except for my new hybrids when I am push the ball almost every time. I am finding the face of the hybrids are open 10-15 degrees at strike. What could be possible fixes for my problem? I'm not sure of ball position or whether to hit the ball as an iron or a wood. Could shaft change to a UST v2HL or Recoil 460 or KBS Max help? Are shaft adjusters a possibility for a sim hybrid?

[Frisco Kid]

If TM is no longer monitoring this thread, mods should shut it down?

[djf414]

Where can I find the serial number on my M6 irons? Also, what was the rev of the HiToe wedges that didn't have the full face grooves?

[GC70]

Can you get the MMT shafts in different weights? You only have one weight to choose from on line.

[BiggErn]

Why does Taylormade not make a 2 hybrid?

[MysteryV]

@TaylorMade Golf - why aren't you using AI for face design? If Callaway made Flashface on Microsoft's garbage Azure platform, imagine what you could do it you teamed up with Google for AI?!?!?!?! Call me.

[Liam1223]

Why are the spider x hydro on such a high back order? 7 months? 

[ob1soccer]

On 3/26/2020 at 4:31 PM, TaylorMade Golf said:

First of all, we hope you are all staying safe during these challenging times.

Like you, we can't wait to get back to normal soon - back playing golf, watching golf and working on our game. But until that happens, we're here for you and want to help you with any burning question you have for our PRODUCT and EXPERIENTIAL & FITTING TECHNICIAN teams. We're happy to answer your questions on (but not limited to) the following:

SIM & SIM Max drivers, fairways, hybridsSIM Max & SIM Max OS ironsP7TW, P760, P790, P790 TI irons, etcTP5/5X, pix, Tour/Soft Response golf balls, etcMG2 wedges, HiToe, Spider, Truss putters, etcCustom Fitting: options, shafts, specs, events, etcIf want to check out all of our content, then please go here: https://www.taylormadegolf.com/clubhouse.html

We're here to help you better understand our products, better inform your decisions on what may/may not be right for your game and get you playing your best golf - whenever that may be (hopefully soon). We're #golftimistic and we want you to be too.

Thanks

TaylorMade Golf

thanks for all the information

[AvgSlicer]

What is BBGM of the Sim driver?

Are there heavier weights for Sim 2 ti woods?