Jump to content

What Putter Grip Do you use and Why?


1221

Recommended Posts

On 4/12/2021 at 12:00 PM, Warrick said:

Just pulled the Lamkin deep etch off my Toulon Portland garage, went with Traxion Pistol GTTour 1.0, love it, needed something just a touch bigger to fill my hands

This is pretty much the switch I made. I had a Deep Etch on a Jailbird Mini. I kept the stock grip on my stroke lab 7 for a little bit but have been using the SS Traxion Pistol GT 1.0 for a few rounds now. I like the slight Pistol at the top of the grip and very flat paddle on the front. I agree, its not too big, not too small, and definitely not too round. I do think if there was a non-cord Deep Etch in a midsize/oversized grip that was in the 100-110 gram range I would try it out right away. The only option seems to be the Bettinardi cord version which is around 130g.

 

I pulled the stroke lab weight (luckily with the black putters, its just held in with o-rings) and added the counter core 25g to get the within a few grams of the stock weight. I think this one will stick around a while.

We're going on a Minimalist Adventure who knows were we'll end up:

"Full" 10-Club Bag currently looks like this:

Taylormade BRNR Mini Copper 13.5

Taylormade Sim Max 7w Mitsubishi Diamana F Limited 75S

Titleist 818H1 25* Fuji Atmos Black 9s

Callaway Mavrik Pro 7-PW Project X Rifle Tour Flighted 105 6.0

Vokey SM9 50.08F

Vokey SM9 56.10S

White Hot OG #1

Srixon Z Star/Chrome Soft X

Link to comment
Share on other sites

  • 1 month later...
On 2/27/2021 at 3:29 PM, 1221 said:

Buying A new putter and Not sure What grip to put on it?

See your local PGA pro, seek advise, take a lesson or two, THEN, buy the soft thing on the other end of the flat stick. That route will be cheaper than buying a zillion grips and do the testing (and regripping).

Driver:     TSi3, 9º set to 8.25º, Diamana D+ Ltd, Blackboard D70+, X
FWs:        TSi3, 15º set to 13.25º and 18º set to 17.25º, Diamana D+ Ltd, Blackboard, D80+, X
Irons:       Srixon ZU85, 18º, 40.5", Tensei White 90 HY, X
                 Srixon ZX, 20º bent to 21º, KBS Tour HY Proto 95, X
                 Srixon Z585 5, bent to 24º (4) and 6 bent to 27º (5), NM 3, 130 X
                 Titleist 670 forged, 6-9, NM 3, 130 X
Wedges:  Titleist
  SM7 F Raw, 46º-10º, NM 3, 130 X; Cally MD Forged Black, 50º-10º

                  and 54º-10ºm NM 3, 130 S; PM Grind Black, 60º and 64º, NM 3, 130 S
Putter:      Titleist Scotty Studio Stainless NP 2, 35"
Ball:          Titleist Pro V1 - Club rotation varies according to course and weather conditions, scoring remains constantly awful... lols

Link to comment
Share on other sites

I've tried many grips over the years -- from the barely more than a thin rubber layer over the steel, all the way to the biggest of the big in the Superstroke Flatso 3.0. 

 

After all my research I've determined that I like whatever grip comes stock with the putter I buy, but do have a solid preference to smaller grips. Those giant monster grips take all the feel out of putting for me

Driver:       PING G425 MAX 10.5* Diamana S+ 62 X

3w:             PING G425 MAX 14.5* / Ventus Blue 7X

5w:             PING G425 MAX 17.5* / Ventus Blue 9X
Irons:         Mizuno JPX921 Tour 4-PW / MODUS³ 120TX
Wedges:     Cleveland RTX Zipcore 50*, 54*, TaylorMade MG4 HBW 58* / MODUS³ 125 Wedge

Putter:       (Testing) L.A.B DF3 Counterbalance / TPT

Grips        Iomic Sticky Jumbo

 

 

Link to comment
Share on other sites

Pingman blackout. Because if it's good enough for Tiger, it should probably work for me. 🤣

 

<edit> my "new" putter came with a Lampkin oversized and I'm not a fan.

Edited by lefthack

Haywood 1 with Hzrdus Black RDX 70

Haywood 3W PXG 0211 5W

Haywood 18* driving iron

Haywood MB irons 3-PW

Mitsubishi Kuro Kage 80g iron shafts

Haywood 52/10 and 56/12 wedges

Haywood mid mallet putter

Golf Pride Concept Helix grips 

 

"You're not good enough to get mad at your bad shots!" - Bill Murray

Link to comment
Share on other sites

1 hour ago, lefthack said:

Pingman blackout. Because if it's good enough for Tiger, it should probably work for me. 🤣

 

<edit> my "new" putter came with a Lampkin oversized and I'm not a fan.

"was"

 

Tiger doesnt use the Pingman anymore, hes got the deep etch cord

Taylormade Sim 9° (set to 7°) - Fuji 53k X 

Cobra Rad Speed Tour 5 Wood 16° - Speeder 757 Evo TS X

Mizuno MP Fli Hi 18° - C Taper 125 S+
Mizuno MP Fli Hi 23° - C Taper 120 S
Srixon z785 5-PW - KBS TourV X

Cleveland ZipCore 50° - Tour S400
Ping Glide Pro Forged 54°/ Eye Toe 59°  - Tour S400
Seemore mFGP2 
Podcast - "Rough Fairways - A Journey to the PGA Tour" available on Spotify - Pandora - Apple

Link to comment
Share on other sites

Just now, PixlPutterman said:

"was"

 

Tiger doesnt use the Pingman anymore, hes got the deep etch cord

 

He also wrecked his car, so there is that. I'll stick to the Pingman, thanks.

Haywood 1 with Hzrdus Black RDX 70

Haywood 3W PXG 0211 5W

Haywood 18* driving iron

Haywood MB irons 3-PW

Mitsubishi Kuro Kage 80g iron shafts

Haywood 52/10 and 56/12 wedges

Haywood mid mallet putter

Golf Pride Concept Helix grips 

 

"You're not good enough to get mad at your bad shots!" - Bill Murray

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...