Driver - Ping G400 LST 8.5* Tour Stiff 65 Fairways - Ping G410 #5 17.5* Evenflow 75 Stiff (set at big minus 16* = 3/4 wood) Hybrids - Ping G 19* #3 Stiff Tour Stiff 90 and Ping G410 24* #4 Tour Stiff 85 Irons - Ping G410 irons 4-PW Nippon N.S.Pro 950 GH white dot +1/2" Wedges - Ping Glide 3.0 50* UW green dot +1/2" and Odyssey Dual Force with Lyconite face inserts 52* UW and 56* SW/LW 2 degrees upright +1/2" Bag Ping DLX Black Putter Bettinardi Queen Bee #8 2017 model Head covers for woods Ping Black/White Pompoms Balls Titleist ProV1, ProvV1X, AVX and TaylorMade TP5X (depending on the course and weather)
They have product cycles just like any other club manufacturer. If you are looking for an 8, pm me. I have a few.
My guess is they will announce a new line of QB's shortly. These are the 2017 model. Took my new QB #8 down to The Broadmoor in Colorado Springs, yesterday, for its first outing on the West Course. Loved it. The feel and sound is amazing. The greens were fantastic and fast. I holed a couple of 20 footers. It's deadly under 10 feet too providing you get the read correct. Looks like I'm another Bettinardi convert.
Driver - Ping G400 LST 8.5* Tour Stiff 65 Fairways - Ping G410 #5 17.5* Evenflow 75 Stiff (set at big minus 16* = 3/4 wood) Hybrids - Ping G 19* #3 Stiff Tour Stiff 90 and Ping G410 24* #4 Tour Stiff 85 Irons - Ping G410 irons 4-PW Nippon N.S.Pro 950 GH white dot +1/2" Wedges - Ping Glide 3.0 50* UW green dot +1/2" and Odyssey Dual Force with Lyconite face inserts 52* UW and 56* SW/LW 2 degrees upright +1/2" Bag Ping DLX Black Putter Bettinardi Queen Bee #8 2017 model Head covers for woods Ping Black/White Pompoms Balls Titleist ProV1, ProvV1X, AVX and TaylorMade TP5X (depending on the course and weather)
Driver - Ping G400 LST 8.5* Tour Stiff 65 Fairways - Ping G410 #5 17.5* Evenflow 75 Stiff (set at big minus 16* = 3/4 wood) Hybrids - Ping G 19* #3 Stiff Tour Stiff 90 and Ping G410 24* #4 Tour Stiff 85 Irons - Ping G410 irons 4-PW Nippon N.S.Pro 950 GH white dot +1/2" Wedges - Ping Glide 3.0 50* UW green dot +1/2" and Odyssey Dual Force with Lyconite face inserts 52* UW and 56* SW/LW 2 degrees upright +1/2" Bag Ping DLX Black Putter Bettinardi Queen Bee #8 2017 model Head covers for woods Ping Black/White Pompoms Balls Titleist ProV1, ProvV1X, AVX and TaylorMade TP5X (depending on the course and weather)
Ping G400 w/ Tour AD-MT 6s
Titleist 910f w/ Diamana Black S
Ping G400 19* w/ Ping Tour S
Ben Hogan Ft. Worth 23* w/ Recoil F4
Ping i210 5-PW w/ Recoil F4
SM7 50, 54, 58 with PX LZ 6.0
Bettinardi BB8C Dass Koolaid w/ Honeycomb Fit Face
Bettinardi BB0 Carbon Skulls w/ Flymill Face
Bettinardi BB2 Custom Poison w/ Flymill Fit Face
That thing is funky, love the face mill and head cover sic too. Any idea what that face mill is called? Never seen that from Betti... almost like the Ping TR grooves style... or is it just fit face extended across whole face?
A lot of people have asked about this style and it truly is still a work in progress. To date I believe less than 20 FCB have been made and getting one seems to be harder and harder every day. This is a really nice counter balance version that I just listed!
This might be the coolest counter balance putter ever made. This is a solid copper 400g Fred Couples 110 Prototype with the newer "hidden" Fit face that has no outline. Only 3 were made exactly like it. Really a super cool and unique piece from Studio B.
That's stunning..... I am trying to source a FCB myslef!!! Any suggestions?
NJV
You have 4 options:
1) stalk eBay and here, though you may be waiting awhile
2) stalk the Hive and hope you have better internet access than the others on every other Thursday at 10AM
3) visit the studio and get fitted for something they have in stock
4) get a custom made, though I’m not current on the process for doing this
With options 2-4 (probably #1 too) be prepared to back up a Brinks truck. New will probably cost you north of $1500 (didn’t use to be that way).
You were spot on....went the route of calling them and getting a custom one built. They are amazing to work with but it's a small fortune. Probably 2K when it's all said and done ..... Worth it!!!!
I tried a Studio Stock 8 today at a putter fitting. As I'm new to the details around Betti's what I really liked was how soft this head felt with hitting ProV1's. From the current line of putters how do they rate from softest to hardest? Probably most interested in how the BB line compares to the Studio Stock.
I tried a Studio Stock 8 today at a putter fitting. As I'm new to the details around Betti's what I really liked was how soft this head felt with hitting ProV1's. From the current line of putters how do they rate from softest to hardest? Probably most interested in how the BB line compares to the Studio Stock.
-Thanks, Todd
From softest to hardest:
1. FIT Face (horizontal lines usually framed with an upside down 'U'. Rarely see lines across the whole face) Found on current Studio Stock series.
2. Fly Milled - Found on current BB series.
3. Micro honeycomb - Found on current Queen B series.
4. Honeycomb
Or at least that's my opinion. Hope that helps. My favorite are the Fly milled and micro honeycomb face.
I tried a Studio Stock 8 today at a putter fitting. As I'm new to the details around Betti's what I really liked was how soft this head felt with hitting ProV1's. From the current line of putters how do they rate from softest to hardest? Probably most interested in how the BB line compares to the Studio Stock.
-Thanks, Todd
From softest to hardest:
1. FIT Face (horizontal lines usually framed with an upside down 'U'. Rarely see lines across the whole face) Found on current Studio Stock series.
2. Fly Milled - Found on current BB series.
3. Micro honeycomb - Found on current Queen B series.
4. Honeycomb
Or at least that's my opinion. Hope that helps. My favorite are the Fly milled and micro honeycomb face.
This ranking is exactly my experience as well for softest to hardest.
I had a fitting at Bettinardi earlier this year and chose the BB1 over the Studio Stock 8 for two reasons. First, the SS8 had more toe hang where the BB1 has a forward neck (and maybe also a little longer neck) to minimize toe hang. The BB1 has the lowest toe hang I've seen for a plumber neck style anser putter which fits my slight-arc to straight back stroke AND, I just liked the more traditional look of the BB1.
Feel wasn't significantly different between the fly-mill and fit face for me. I wouldn't have chosen one over the other based on these 2 faces alone. NOW, Betti did still have the 2016 BB1 with the Honeycomb face available when I got fit. That face was too hard for me. I ruled that out on feel alone.
To me the 2018 BB1 looks nearly identical to the PING Vault 2.0 Dale Anser. The Studio Stock 8 is a unique look for sure but a great putter. Can't go wrong with either...
Comments
985
5
Had to hunt around to find one and eventually stumbled on a small stock on Amazon which Bettinardi confirmed as theirs and legit.
Fairways - Ping G410 #5 17.5* Evenflow 75 Stiff (set at big minus 16* = 3/4 wood)
Hybrids - Ping G 19* #3 Stiff Tour Stiff 90 and Ping G410 24* #4 Tour Stiff 85
Irons - Ping G410 irons 4-PW Nippon N.S.Pro 950 GH white dot +1/2"
Wedges - Ping Glide 3.0 50* UW green dot +1/2" and Odyssey Dual Force with Lyconite face inserts 52* UW and 56* SW/LW 2 degrees upright +1/2"
Bag Ping DLX Black
Putter Bettinardi Queen Bee #8 2017 model
Head covers for woods Ping Black/White Pompoms
Balls Titleist ProV1, ProvV1X, AVX and TaylorMade TP5X (depending on the course and weather)
n/a
n/a
7941
5
Mizuno MP Fli Hi 18° - C Taper 125
Mizuno MP Fli Hi 23° - C Taper 120
Wilson Staff FG62 - S300
TM Milled Grind 52° - HiToe 56°/62°
Mizuno TPM 7
RZN Platinum
2316
5
not sure why Betti don't make this anymore...
3689
5
They have product cycles just like any other club manufacturer. If you are looking for an 8, pm me. I have a few.
2316
5
985
5
My guess is they will announce a new line of QB's shortly. These are the 2017 model. Took my new QB #8 down to The Broadmoor in Colorado Springs, yesterday, for its first outing on the West Course. Loved it. The feel and sound is amazing. The greens were fantastic and fast. I holed a couple of 20 footers. It's deadly under 10 feet too providing you get the read correct. Looks like I'm another Bettinardi convert.
Fairways - Ping G410 #5 17.5* Evenflow 75 Stiff (set at big minus 16* = 3/4 wood)
Hybrids - Ping G 19* #3 Stiff Tour Stiff 90 and Ping G410 24* #4 Tour Stiff 85
Irons - Ping G410 irons 4-PW Nippon N.S.Pro 950 GH white dot +1/2"
Wedges - Ping Glide 3.0 50* UW green dot +1/2" and Odyssey Dual Force with Lyconite face inserts 52* UW and 56* SW/LW 2 degrees upright +1/2"
Bag Ping DLX Black
Putter Bettinardi Queen Bee #8 2017 model
Head covers for woods Ping Black/White Pompoms
Balls Titleist ProV1, ProvV1X, AVX and TaylorMade TP5X (depending on the course and weather)
n/a
n/a
757
5
3689
5
I was going to say “no”, but then I realized what I had (keep in mind I’ve somehow acquired 3x this number in other brands over the years).
I wouldn’t say I collect them, mainly since they are all “off the rack” designs, but I do like to play around with different styles.
767
5
Cobra Bio Cell 4w - Accra CS1 70 M3
Mizuno JPX850 - Altus Hybrid
Wilson c300 forged 4-GW - Paderson Kevlar Green 110
GrindWorks 54/58
Toulon - with Edel / Lajosi / Ping / Xenon / Odyssey / Black Lab on possible rotation
985
5
Wow! wonderful collection.
Fairways - Ping G410 #5 17.5* Evenflow 75 Stiff (set at big minus 16* = 3/4 wood)
Hybrids - Ping G 19* #3 Stiff Tour Stiff 90 and Ping G410 24* #4 Tour Stiff 85
Irons - Ping G410 irons 4-PW Nippon N.S.Pro 950 GH white dot +1/2"
Wedges - Ping Glide 3.0 50* UW green dot +1/2" and Odyssey Dual Force with Lyconite face inserts 52* UW and 56* SW/LW 2 degrees upright +1/2"
Bag Ping DLX Black
Putter Bettinardi Queen Bee #8 2017 model
Head covers for woods Ping Black/White Pompoms
Balls Titleist ProV1, ProvV1X, AVX and TaylorMade TP5X (depending on the course and weather)
3689
5
It’s the 35” one, believe it’s 343g. I’ve been looking for a BC3 or BC5. These are absolutely the softest putters I have ever felt.
n/a
n/a
36
0
258
3
Titleist 910f w/ Diamana Black S
Ping G400 19* w/ Ping Tour S
Ben Hogan Ft. Worth 23* w/ Recoil F4
Ping i210 5-PW w/ Recoil F4
SM7 50, 54, 58 with PX LZ 6.0
Bettinardi BB8C Dass Koolaid w/ Honeycomb Fit Face
Bettinardi BB0 Carbon Skulls w/ Flymill Face
Bettinardi BB2 Custom Poison w/ Flymill Fit Face
1021
5
That thing is funky, love the face mill and head cover sic too. Any idea what that face mill is called? Never seen that from Betti... almost like the Ping TR grooves style... or is it just fit face extended across whole face?
851
5
27
0
n/a
n/a
1106
5
Callaway V-Series Heavenwood
Nike Vapor Speed 23*
Srixon Z585/Z785
Nike Engage 56/60* & Callaway PM Grind 64*
SeeMore DB4x PR
#Colts #COLTure
836
5
33
0
62
0
Would love to take a shot at prying it away from them
Thanks
NJV
62
0
Thanks
NJV
n/a
n/a
62
0
That is spectacular!!!
Congrats man......how did you go about getting that made?
NJV
62
0
That's stunning..... I am trying to source a FCB myslef!!! Any suggestions?
NJV
2316
5
8163
5
You have 4 options:
1) stalk eBay and here, though you may be waiting awhile
2) stalk the Hive and hope you have better internet access than the others on every other Thursday at 10AM
3) visit the studio and get fitted for something they have in stock
4) get a custom made, though I’m not current on the process for doing this
With options 2-4 (probably #1 too) be prepared to back up a Brinks truck. New will probably cost you north of $1500 (didn’t use to be that way).
WITB Link
62
0
Thanks for the reply
n/a
n/a
67
0
-Thanks, Todd
654
5
From softest to hardest:
1. FIT Face (horizontal lines usually framed with an upside down 'U'. Rarely see lines across the whole face) Found on current Studio Stock series.
2. Fly Milled - Found on current BB series.
3. Micro honeycomb - Found on current Queen B series.
4. Honeycomb
Or at least that's my opinion. Hope that helps. My favorite are the Fly milled and micro honeycomb face.
vs
*waiting on USPS* 8.5* Ping G400LST w/stock Alta
15* Taylormade M3 w/GD AD BB-7
Srixon U85 3 iron w/UST Recoil
Srixon Z545 4-PW w/Nippon NS Pro 950
Cleveland RTX 4 50*
Titleist Vokey SM6 54*, 58*
Bettinardi QB 8 33"
Backups:
Odyssey O-Works Black #7s 33"
Scotty Studio Style Newport 2 33" (custom shop)
471
5
This ranking is exactly my experience as well for softest to hardest.
I had a fitting at Bettinardi earlier this year and chose the BB1 over the Studio Stock 8 for two reasons. First, the SS8 had more toe hang where the BB1 has a forward neck (and maybe also a little longer neck) to minimize toe hang. The BB1 has the lowest toe hang I've seen for a plumber neck style anser putter which fits my slight-arc to straight back stroke AND, I just liked the more traditional look of the BB1.
Feel wasn't significantly different between the fly-mill and fit face for me. I wouldn't have chosen one over the other based on these 2 faces alone. NOW, Betti did still have the 2016 BB1 with the Honeycomb face available when I got fit. That face was too hard for me. I ruled that out on feel alone.
To me the 2018 BB1 looks nearly identical to the PING Vault 2.0 Dale Anser. The Studio Stock 8 is a unique look for sure but a great putter. Can't go wrong with either...
n/a
n/a
582
5