Continental Golf - Refinishing and More!

[Free swingr]

I have a set of scratch sb-1's that I'd like to have made into a raw finish or possibly a black ox type of finish. Is that something that you guys can do?

[erock9174]

Diggin the volt R15 although I think it would have looked better if the red around "TM" was volt as well. Volt and red just doesn't go together well.

[bu11dog]

[quote name='gioguy21' timestamp='1430231822' post='11457921']
is it possible to do a side by side of your volt versus nike's volt to see how close they are in comparison?
[/quote]

So if you got a Volt refinished would it become a ReVolt? badumdum...

[Continental Golf]

Sorry Gio atm I don't have a volt to do a side by side but I can show you when I get one in. Thanks guys

[Continental Golf]

Titleist 910 Driver refinished matte pink.

[Beastmode Broker]

[quote name='gioguy21' timestamp='1430231822' post='11457921']
is it possible to do a side by side of your volt versus nike's volt to see how close they are in comparison?
[/quote]

the Volt R15 is actually my buddies and a member here too, Ill see if he can chime in
he went w a FLAT finish over Gloss
it isn't Volt, its more of a greenish in flat light, and yellow-ish in the sun
still turned out great and he's happy w it, but its not Volt

next time we play, Ill snap a pic of the bottom of my driver and the top of his to compare for you

[Beastmode Broker]

[quote name='erock9174' timestamp='1430404529' post='11472633']
Diggin the volt R15 although I think it would have looked better if the red around "TM" was volt as well. Volt and red just doesn't go together well.
[/quote]

that is actually a decal on the bottom of the driver, it can't be paint filled otherwise it would have been

[Payton1020]

What's the WRX special to have a Mizuno JPX EZ refinished??

[Saltfork]

I can't stop looking at this thread. Wanting to have a 910D3 done in matte black. What's the preferred method of contact? Message here, on Facebook or phone call?

[Russ757]

Pm ... Justin is great about getting back in touch

[GooseHook]

[quote name='Saltfork' timestamp='1430747743' post='11494621']
I can't stop looking at this thread. Wanting to have a 910D3 done in matte black. What's the preferred method of contact? Message here, on Facebook or phone call?
[/quote]

That's a basic job. Just fill out the order form, box up your driver head, and send it on it. They'll call you when your head gets in to the shop.

I had no prior contact with them when I sent mine in, just made some detailed notes on the form and then we talked over the phone once they were about to start.

[Warrick]

I jacked around on this forever and missed the deal, but WTH. I have 2 identical BC+ heads, so just sent one in this morning. I was not 100% sure what to do, so asked for SLDR Gray with a white sight dot, and also asked if they could put that little half moon that is on the back of the SLDR crown, in white also.

I am open to suggestions if anyone thinks they have a better looking idea on it. I want to stick inside these colors (black/white/gray, maybe blue).

None the less, this will be a fun process, excited to see how it turns out.

Thanks to all who have contributed, and keep up the great work Continental!

[Togatown22]

[quote name='Warrick' timestamp='1430842772' post='11503099']
I jacked around on this forever and missed the deal, but WTH. I have 2 identical BC+ heads, so just sent one in this morning. I was not 100% sure what to do, so asked for SLDR Gray with a white sight dot, and also asked if they could put that little half moon that is on the back of the SLDR crown, in white also.

I am open to suggestions if anyone thinks they have a better looking idea on it. I want to stick inside these colors (black/white/gray, maybe blue).

None the less, this will be a fun process, excited to see how it turns out.

Thanks to all who have contributed, and keep up the great work Continental!
[/quote]

You won't be disappointed. They do really amazing work. Every time I look at the two heads they did for me I'm pleased all over again!

[GooseHook]

[quote name='Warrick' timestamp='1430842772' post='11503099']
I jacked around on this forever and missed the deal, but WTH. I have 2 identical BC+ heads, so just sent one in this morning. I was not 100% sure what to do, so asked for SLDR Gray with a white sight dot, and also asked if they could put that little half moon that is on the back of the SLDR crown, in white also.

I am open to suggestions if anyone thinks they have a better looking idea on it. I want to stick inside these colors (black/white/gray, maybe blue).

None the less, this will be a fun process, excited to see how it turns out.

Thanks to all who have contributed, and keep up the great work Continental!
[/quote]

Yeah sight dot! I LOVE the way mine turned out.

[Warrick]

Not many updates lately, so thought I would throw up pics of my BC+ done in SLDR gray with a white sight dot. I just got the pics from Continental this morning.

 

I am thrilled with the new look, can't wait to see it in person. Continental rocks, so great to work with.

 

 

[ode1]

Warrick--miles better than the original....looks great!

[Beastmode Broker]

heres a side by side of the Volt R15 and a Nike Speed head

in the sun its definitely more "Volty"

I think if it was a gloss finish, it would stand out more

 

[Continental Golf]

Hey guys its been a while. I wanted to show you guys a picture of the oil quench that we can do. Thanks and I hope everyone is doing well!

[Puppetmaster]

The SLDR grey BC+ looks awesome. Really nice choice and great work.

 

Also, just a reminder of how an eggshell black, not flat black, BC+ looks. I can stare at this for hours.

 

[Warrick]

The SLDR grey BC+ looks awesome. Really nice choice and great work.

 

Also, just a reminder of how an eggshell black, not flat black, BC+ looks. I can stare at this for hours.

 

 

I amlost went eggshell black, but another guy has that with the sight dot, so wanted a little different. I had a SLDR for a short bit, just loved the look of the head. I think that color will make it look a bit smaller also. I can't wait to get it.

 

Your does look awesome.

[ode1]

Eggshell looks great, very nice refinish job on the two BC+!

[Covert]

Here are my matte black Covert fairway and hybrid (swoosh intact), and my Method Concept. Continental did a fantastic job. I feel I have one of the most badass looking putters ever.

 

[PeanutsDaddy]

Here are my matte black Covert fairway and hybrid (swoosh intact), and my Method Concept. Continental did a fantastic job. I feel I have one of the most badass looking putters ever.

 

 

Fan of the entire set-up. Really like the 'murdered' look.

 

A testament to Continental's work . . . they can make a Method Concept look cool ; )

[Continental Golf]

A customer wanted something a little different on his G30....

[VanBTs]

Can't believe nobody commented on the Ping Anser on the last page... Milling looks fantastic and the finish was great. Mine has a sound slot so I'm a little hesitant to modify it. Definitely considering sending my inbound SLDR Mini in for a gloss black crown and silver polished sole...

[Dr. Frankenputts]

[quote name='VanBTs' timestamp='1432438429' post='11616678']Can't believe nobody commented on the Ping Anser on the last page... Milling looks fantastic and the finish was great. Mine has a sound slot so I'm a little hesitant to modify it. Definitely considering sending my inbound SLDR Mini in for a gloss black crown and silver polished sole...[/quote]

You should have seen it before my god was it bad

[VanBTs]

[quote name='Dr. Frankenputts' timestamp='1432468668' post='11617542']
[quote name='VanBTs' timestamp='1432438429' post='11616678']Can't believe nobody commented on the Ping Anser on the last page... Milling looks fantastic and the finish was great. Mine has a sound slot so I'm a little hesitant to modify it. Definitely considering sending my inbound SLDR Mini in for a gloss black crown and silver polished sole...[/quote]

You should have seen it before my god was it bad
[/quote]
Mine isn't too ugly regarding the finish, just really dinged up from 30 or so years of bag chatter. That's the best thing about those old Pingers though, there is no standard for beauty.

[rtraudt]

[quote name='Continental Golf' timestamp='1432048152' post='11585814']
A customer wanted something a little different on his G30....
[/quote]

I personally wouldn't toss the skull and crossbones on my driver head (too distracting for me), but I really like how the gloss finish seems to hide the turbulators a little compared to the stock matte. Looks great!

[TMBob]

Any members redo a Jet Speed head?

CC.....any picks of a Jet Speed head that is not stock looking?

[ckay]

Here are my matte black Covert fairway and hybrid (swoosh intact), and my Method Concept. Continental did a fantastic job. I feel I have one of the most badass looking putters ever.

 

 

Fan of the entire set-up. Really like the 'murdered' look.

 

A testament to Continental's work . . . they can make a Method Concept look cool ; )

That putter refinish looks awesome! What is the finish called? Did they do the shaft also?