Continental Golf - Refinishing and More!

[Continental Golf]

[quote name='avgjoe' timestamp='1426887715' post='11182079']
original burner-esque
[/quote] I saw your questions earlier. It does add a little bit of weight to the club but its not going to be very much. Glad you guys are liking the stuff.

Promotion ends at the end of this month so get the clubs in soon everyone.

[eddiebigeddie]

Received mine in today too. Will take pics tomorrow in the sunlight.

[eddiebigeddie]

[attachment=2675381:ImageUploadedByGolfWRX Mobile1427071923.835751.jpg][attachment=2675383:ImageUploadedByGolfWRX Mobile1427071935.566756.jpg][attachment=2675387:ImageUploadedByGolfWRX Mobile1427071947.168716.jpg][attachment=2675389:ImageUploadedByGolfWRX Mobile1427071958.086076.jpg]

[Payton1020]

[quote name='Continental Golf' timestamp='1426891851' post='11182417']
[quote name='avgjoe' timestamp='1426887715' post='11182079']
original burner-esque
[/quote] I saw your questions earlier. It does add a little bit of weight to the club but its not going to be very much. Glad you guys are liking the stuff.

Promotion ends at the end of this month so get the clubs in soon everyone.
[/quote]

Tell me again about the promotion please. I got caught up in all the awesomeness and forgot.

[Russ757]

It's called reading and it's on page 1

[freddy1682]

Can you guys confirm you received my putter head? USPS never updated the tracking info. Never Compromise Gambler. Should've gotten there last week.

[Hot Rod 71]

I sent in a Callaway X2 Hot driver head and 3 wood head, and a Diablo Edge Tour head for refinishing. The results are below.

[attachment=2678293:SAM_0547.JPG]

[attachment=2678295:SAM_0549.JPG]

[PeanutsDaddy]

Hotrod,

So many of the heads in this thread look better than the originals.

[Brooks_Cupcake]

[quote name='Continental Golf' timestamp='1421437201' post='10758739']Hi everyone!

We are Continental Golf and are honored to be part of the GolfWRX community.

A little about us

We started back in 1972 as a small repair shop and have grown into the largest repair shop on the east coast. We specialize in custom fitting, repair and of course refinishing.

Our repair shop is 5,000 square feet with a 400 square foot spray booth. We can do anything from repairing or refinishing a wooden woods to reshafting, hotmelting, grinding,regooving irons and refinishing the newest custom color golf clubs

Going forward we will be putting some examples of our refinished clubs and we very much look forward to hearing from everyone and being part of this community!

If anyone has any questions you can visit our website at continentalgolf.net or our facebook page [url="https://www.facebook.com/pages/Continental-Golf/399181940140695"]https://www.facebook...399181940140695[/url] (has some pictures of our different finishes). Our number is 919-833-8887 and you can call and talk any any of us if you have further questions.[/quote]

Have you done anything with the new Nike Vapor Pro Driver? If not, what would you do about the bottom of the driver and crown?

[Continental Golf]

Ok everyone its been a while and its time for some pictures!

First one will be a Nike Vapor Driver. The volt is gone and we did the top matte black. If you want something like this done you are looking at 75 dollars for the top and bottom. After working with this one at length there is a chance that the volt color when being repainted would have to be the whole cavity depending on how well the volt removes.

[Continental Golf]

Next is a Karsten Tr that we turned into a satin finish.

[Continental Golf]

The final one is a special project we did for a wrx member that is like the Tour AD BB paint scheme.

[erock9174]

Did you guys prefect the Volt color yet ? Any examples.

[Aviador Naval]

Picked up a Ping Rapture V1 3w for $25 at a local retailer that I plan to use from the tee when I need to stay short of trouble or want to play a draw.

I had a NV 75 installed to play D3 at 42.5" and the refinish done in Titleist 915 colors to match my driver. The 915 style paint flecks don't show in the picture but they are there and the spot on the bottom is a reflection of our foyer light fixture and not a refinish flaw. It looks so much better with that half moon alignment aid removed.

I'm very happy with the result and can't wait to put her in play!

[attachment=2680863:IMG_0968_2.jpg]

[attachment=2680865:IMG_0969_2.jpg]

[attachment=2680867:IMG_0974_2.jpg]

[attachment=2680869:IMG_0975_2.jpg]

[attachment=2680871:IMG_0976_2.jpg]

[bu11dog]

[quote name='Continental Golf' timestamp='1427314190' post='11214947']
The final one is a special project we did for a wrx member that is like the Tour AD BB paint scheme.
[/quote]

Now that's just freakishly awesome looking.

[mvhoffman]

Anyone have a putter face milled by continental? Show me

[Russ757]

Justin and the scientists strike again

 

 

they also did a 9033 that Im not going to be using but .. if (and they should) run this again next year, I can def see myself sending the same clubs back down. $200 for three redone heads is much cheaper, and actually more fun, than three new clubs

[awolmartinez]

Is it possible to put a matte white over matte black but replace the graphics exactly where they are currently? I've gotten use to the black, but I really miss my white rbz head!

[bellview17]

I wished I kept clubs long enough to have them refinished...too much of a ho...

but, I am looking for a few putter shafts....
I have a ping blade without a shaft and looking for a pencil shaft for a tpmills spalding????
Might have to call....

[IH823PUTT]

I am more and more impressed with each refinish I see! Keep up the great work, guys!

[Ewmcdade]

[quote name='Nine Miler' timestamp='1426805332' post='11175935']
So, I got my V Steel back from Continental and it is absolutely perfect. Another excellent job.
[/quote]

Motherofgod.jpg

[Nine Miler]

[quote name='Ewmcdade' timestamp='1427853125' post='11257809']
[quote name='Nine Miler' timestamp='1426805332' post='11175935']
So, I got my V Steel back from Continental and it is absolutely perfect. Another excellent job.
[/quote]

Motherofgod.jpg
[/quote]

It's pretty huh?

[raholland71]

Any pics of a matte 915?

[whiteretro]

Any clubs finished with the DuPont 5 color rainbow paint that is used on hot rods?

[Djohnson2842]

Alot of great reviews on here.

Sent my black r1 in today. Going to do matte black with matte white r1 logo on top.
I cannot wait to see the results

Based on everyone else's results it looks like it will turn out great

[freddy1682]

Can you guys do an exact match to the Ping Rapture (2014) fairway? The matte black? Can you do the same alignment marking as well?

[Continental Golf]

We have a driver here for a football fan. How good does this look?

[Continental Golf]

Here is a Spider putter that got some blue love.

[cadman88]

That Blue spider putter looks nice.. I'm typing this from Cozumel, Mexico (85 and sunny today) our cruise ship will be leaving within the hour for Tampa.. Then the long drive back to NY. I've only been on here a bit but I know my Tour AD BB build is sitting at home and I'll get some pics of it with the shaft installed once I get back home.

[Aviador Naval]

[quote name='Nine Miler' timestamp='1426805332' post='11175935']
So, I got my V Steel back from Continental and it is absolutely perfect. Another excellent job.
[/quote]

In your pics, the TM trademark is gone as an alignment mark. It looks better clean. Did you ask them to do that or had you done that previously?