What putter did you just buy ?

[D0ch0l1d4y]

Couldn't pass this guy up.

 

[Miba8055]

My new pride and joy.  

[seeshawn]

Tour issued Head

[jmagri78]

Did a Lab remote fitting a couple months ago and decided to wait to place an order. During the 20% off outlet sale I decided to order a somewhat custom Mezz Max with my specs. I was really leaning towards the DF, but that model wasn't available on the outlet in my specs. Should be receiving it next week, pretty quick shipping (about 2 1/2 weeks). Excited to experience the tech and see what all the hype is about.

 

Black head

34 inch length

67 degree lie

Accra black shaft

1.5 forward press grip

 

 

Edited December 16, 2023 by jmagri78

[PSUJJH86]

Logan Olson Craft Batch No. 1 from @newportbeach 🤙🏼

[mikeatr]

Went to my local shop to return a club and saw this hanging out in the preowned section. Couldn’t find any info on it online, hoping yall can help!

 

 

[MattM97]

2 hours ago, mikeatr said:

Went to my local shop to return a club and saw this hanging out in the preowned section. Couldn’t find any info on it online, hoping yall can help!

 

 

 

Probably just made for the proshop sold at an upcharge cause the club logo is on it.

[Phabs]

8 hours ago, mikeatr said:

Went to my local shop to return a club and saw this hanging out in the preowned section. Couldn’t find any info on it online, hoping yall can help!

 

 

 

[mprince]

Picked up an Odyssey Ai-One #1 this week, custom order as I got a 36" shaft.  Arrived in time for my Friday round, it's going to take a bit to dial in as it's way heavier than my Ping and Cleveland Anser-style putters.

[Dpavs]

I recently picked up a Ai-ONE Milled Two T CH Putter. I like the feel better than what I have been gaming this past 2 years which was the White Hot OG #1 stroke lab. The Ai-One milled has a nice pop off the face and I seem to be able to detect better which part of the face I hit the ball on. The OG #1 was very muted and it was hard to tell if the strike was slight toe or slightly heel or dead center. 

 

 

[FireRockAndy]

PING WRX Redwood with beached face, and tungsten plugs -- 365g head on a UST frequency filtered shaft installed from the HQ. It's in really good shape, as you can see in the pics. I cleaned the ugly paint fill off it and found the factory paint underneath in perfect condition. Another eBay gem added to collection for less than the cost of making these mods at WRX to a Redwood I already owned.

 

 

Edited December 18, 2023 by FireRockAndy
pics

[remlap13]

Snagged a LAB Mezz.1 from their outlet during the 20% off sale a couple weeks ago. Just need a new putting mat for the house now so I can get through the remaining 4 months of winter... 

[third-times-a-charm]

Futura conversion to plumbers neck with a real Scotty neck from a studio. Black PVD and a bunch of paint fill.

 

 

[MattM97]

14 minutes ago, third-times-a-charm said:

Futura conversion to plumbers neck with a real Scotty neck from a studio. Black PVD and a bunch of paint fill.

 

 

 

I like the repurposing of the chopped off neck. 

[tarrantian]

On 12/10/2023 at 8:19 PM, luke1333 said:

New purchase Sunday, Piretti getting into the copper game and had to give it a shot! Should fit in nicely with my other putters especially with the removable weights!! Anybody else pick one up?

 

 

 

 What a piece of work - Putter porn at it's finest to me. Would love to have a sense as this baby cost you... 

[TerryDactyl]

On 12/16/2023 at 12:47 AM, seeshawn said:

Tour issued Head

Dang! How'd you get that bad boy 

[seeshawn]

1 hour ago, TerryDactyl said:

Dang! How'd you get that bad boy 

eBay 

[luke1333]

On 12/17/2023 at 8:20 PM, FireRockAndy said:

PING WRX Redwood with beached face, and tungsten plugs -- 365g head on a UST frequency filtered shaft installed from the HQ. It's in really good shape, as you can see in the pics. I cleaned the ugly paint fill off it and found the factory paint underneath in perfect condition. Another eBay gem added to collection for less than the cost of making these mods at WRX to a Redwood I already owned.

 

 

Nothing and I mean nothing feels better then a UST FF shaft!!! Great stick!! 

[third-times-a-charm]

Custom 2LON I just got back from ECCP. Inspired by the one that was made on tour before Toulon left callaway.  Came out amazing. Lots of work done to this one. Head weight is 340g on the dot without the weight plate and the fill in.

 

face mill

odyssey logo removal 

sole filled and smoothed 

Custom stamping 

top sight line 

 

 

Edited December 23, 2023 by third-times-a-charm

[Mobert19]

BB1W LH and OMOI 2 within two days of each other. Both phenomenal but Betti just looks amazing

[dj6627]

On 12/16/2023 at 12:47 AM, seeshawn said:

Tour issued Head

Nice    What is the head weight ?

[snowmangolf]

This bad boy came in today. Carbon with a smooth face. First smooth face milled putter I’ve ever owned. Loving the sound and feel so far rolling it on the carpet. 

[LoopySwing13]

On 12/18/2023 at 3:25 PM, third-times-a-charm said:

Futura conversion to plumbers neck with a real Scotty neck from a studio. Black PVD and a bunch of paint fill.

 

 

 

3 hours ago, snowmangolf said:

This bad boy came in today. Carbon with a smooth face. First smooth face milled putter I’ve ever owned. Loving the sound and feel so far rolling it on the carpet. 

Some stunning additions! 

[AndersonGT]

Yo! Happy Holidays my friends! Been a while since I posted.

 

Bought a new SIK Pro C today after hours of figuring what my next putter purchase was going to be. You can pick up any new model at Pro Clubs for just over $250 after coupon. I respect @MattM97 opinions here among others and SIK seems to get positive feedback for the most part. I'm sending it straight to East Coast Custom Putters for a proper makeover and to make it truly one of a kind. I won't see the results for two months but have high expectations. Two years ago I would have had to pay almost $700 for just the stock putter and now the prices have dropped so much, I can make the way I like for $200 less! 

 

I'm to the point after owning all kinds of nice putters (Scotty, Betti, EVNRoll and many others) to know what works for me. Gotta be Anser, 8802, or #9 style w/slant neck or heel shafted. I just don't putt well with anything else. Currently in the bag is a Cleveland Frontline 2.0. Lowest PPR average of any putter I have owned with the PING Kushin 2023 right behind it. Besides my old 8882, the Frontline is one of the cheapest putters I have ever owned. Funny how that works. I think Frontlines are probably the most underrated putter on the market. I feel comfortable doing this since I already have a putter I know I can count on.

 

This new SIK will be very similar to the Kushin but with that premium custom look and the added tech of DLT. In all honesty, that stock Kushin rolled the ball very well anyway. 

 

Just one pre-makeover pic because you already know what they look like.

 

Edit: Almost bit on a Toulon Garage with a Plumbers Neck but I knew better. It's still on the bay for $500.

 

 

Edited December 29, 2023 by AndersonGT

[MattM97]

29 minutes ago, AndersonGT said:

Yo! Happy Holidays my friends! Been a while since I posted.

 

Bought a new SIK Pro C today after hours of figuring what my next putter purchase was going to be. You can pick up any new model at Pro Clubs for just over $250 after coupon. I respect @MattM97 opinions here among others and SIK seems to get positive feedback for the most part. I'm sending it straight to East Coast Custom Putters for a proper makeover and to make it truly one of a kind. I won't see the results for two months but have high expectations. Two years ago I would have had to pay almost $700 for just the stock putter and now the prices have dropped so much, I can make the way I like for $200 less! 

 

I'm to the point after owning all kinds of nice putters (Scotty, Betti, EVNRoll and many others) to know what works for me. Gotta be Anser, 8802, or #9 style w/slant neck or heel shafted. I just don't putt well with anything else. Currently in the bag is a Cleveland Frontline 2.0. Lowest PPR average of any putter I have owned with the PING Kushin 2023 right behind it. Besides my old 8882, the Frontline is one of the cheapest putters I have ever owned. Funny how that works. I think Frontlines are probably the most underrated putter on the market. I feel comfortable doing this since I already have a putter I know I can count on.

 

This new SIK will be very similar to the Kushin but with that premium custom look and the added tech of DLT. In all honesty, that stock Kushin rolled the ball very well anyway. 

 

Just one pre-makeover pic because you already know what they look like.

 

Edit: Almost bit on a Toulon with a Plumbers Neck but I knew better. It's still on the bay for $500.

 

 

 

Appreciate the kind words and while it does suck to see SIK go away for whatever LAGP is doing right now with putters (which isn't much). But the one good thing is now there are a ton of quality putters out there for cheap, like a modern day Never Compromise or YES putter.  

[snowmangolf]

The other Good Wood I picked up this week. Okay I swear I’m done for a little while now. 

[eddiebigeddie]

Technically “ordered/bought” the Copper one end of October, but she arrived today and has someone to play with now….

[storm319]

On 12/3/2023 at 3:15 PM, 03trdblack said:

 

For those who don't know, it's essentially a Scotty Cameron 009 in all but the name. 

More like the retail gun blue classic line Newport, but still cool. I’d imagine that these are much harder to find now but these used to be a great low cost alternative to the mid-90’s carbon steel Newports.
 

I found a TA Milled 2 long neck with most of the finish still intact at 2nd Swing for $18 several years ago (wasn’t for me in and ended up selling it on the BST).

[becoh]

Picked up an Odyssey OG Rossie with the slant neck. Always like the look of them and a Christmas gift card finally made me pull the trigger. It's 34' so I'll have to get it cut down a bit, and find a grip that I like. So far it's much softer than my old B60

[tutto benne]

A recent vintage addition - Bronty Rustler MK II brass putter.