NEW COBRA DRIVERS?

[TG_343]

Yeah I agree with the above. I'd say we're looking at an SZ Pro or +, a standard SZ, and this SZ Xtreme.

[mrmikeac]

If you look closely it looks like the milled face wraps around the sole and crown, could be a new cup face /wraparound face to help with off center hits

[03trdblack]

> @mrmikeac said:

> If you look closely it looks like the milled face wraps around the sole and crown, could be a new cup face /wraparound face to help with off center hits

 

Good catch!

[gambit]

I hope the crowns of the new woods aren't so busy. It was hard to look at the F9 all the time. LTD Pro was beautiful and muted. Just didn't like the space port. I still have the Bio Cell Pro drive and Plus fairways.

[03trdblack]

Welp, guess GolfWRX deleted my post with the pictures.

[QuigleyDU]

> @mrmikeac said:

> So I posted this on my IG page, Cobra just messaged me and politely asked me to take it down. Release will be in November

 

I would have said, Send me one and I will take it down. hahaha.

[gambit]

> @03trdblack said:

> Welp, guess GolfWRX deleted my post with the pictures.

 

How busy was the crown?

[03trdblack]

> @gambit said:

> > @03trdblack said:

> > Welp, guess GolfWRX deleted my post with the pictures.

>

> How busy was the crown?

 

It was just a picture of the sole. No crown pic yet.

[mesomike]

Liked the F9, but it was a spun a bit more than I would like. I hope they make the crown a little more simple and sleek on the F10.

[Myherobobhope]

> @gambit said:

> I hope the crowns of the new woods aren't so busy. It was hard to look at the F9 all the time. LTD Pro was beautiful and muted. Just didn't like the space port. I still have the Bio Cell Pro drive and Plus fairways.

 

LTD is freaking great... subtle "winner's flag" on the top that you can't always see... I agree on the space port... but I'm not looking at the bottom of the club! I've loved my LTD. Will be interested to see if it can be kicked out of the bag.

[Rpete33]

*** due to protection of intellectual property, photo has been removed. Please do not repost ***

[Gary Gutful]

Awesome. I wouldn't want my speed zone to be anything other than extreme.

[QuigleyDU]

I am not in the market, but if they come out with something in the 440 range, I may pick one up just because I have always liked cobra drivers.

[SubaruWRX]

> @"Gary Gutful" said:

> Awesome. I wouldn't want my speed zone to be anything other than extreme.

 

This one is even extreme-ier... it’s Xtreme!!!

 

Spell the word wrong and it’s even cooler!

[Puttersaurus Rex]

I just appreciate how the SZ Xtreme and M6 have a similar shape to the Fusion driver from 3 years ago.

[getair23]

The back weighting and center of the sole look a lot like the G400.

[titleless_30]

Looks super similar to my F9. Might give it a run...

[Yacuone]

Just seen all the new stuff with our rep. Everything looks really, really solid.

 

The Xtreme will have a higher MOI than anything out right now. The other speedzone still has the front and back weights. 2 colorways. The full milled face wraps around and doesn't look bad at address at all. Fairways look clean. Slight improvement all around.

The new Forged Tec piqued my interest. Foam filled and look real good imo.

[Z1ggy16]

Guessing they will also have a matching low spin model with weight up front.

[mrmikeac]

> @Yacuone said:

> Just seen all the new stuff with our rep. Everything looks really, really solid.

>

> The Xtreme will have a higher MOI than anything out right now. The other speedzone still has the front and back weights. 2 colorways. The full milled face wraps around and doesn't look bad at address at all. Fairways look clean. Slight improvement all around.

> The new Forged Tec piqued my interest. Foam filled and look real good imo.

 

THATS what I’m excited for, the new Forged Tec’s

 

The Forged Tec Blacks were some of the best irons I’ve ever owned but I had to trade them in for a set of P760’s because they just had way too much offset. Hopefully these will have less

[QuigleyDU]

> @Yacuone said:

> Just seen all the new stuff with our rep. Everything looks really, really solid.

>

> The Xtreme will have a higher MOI than anything out right now. The other speedzone still has the front and back weights. 2 colorways. The full milled face wraps around and doesn't look bad at address at all. Fairways look clean. Slight improvement all around.

> The new Forged Tec piqued my interest. Foam filled and look real good imo.

 

so no speedzone tour?

[Yacuone]

> @QuigleyDU said:

> > @Yacuone said:

> > Just seen all the new stuff with our rep. Everything looks really, really solid.

> >

> > The Xtreme will have a higher MOI than anything out right now. The other speedzone still has the front and back weights. 2 colorways. The full milled face wraps around and doesn't look bad at address at all. Fairways look clean. Slight improvement all around.

> > The new Forged Tec piqued my interest. Foam filled and look real good imo.

>

> so no speedzone tour?

 

No. Just the 2 heads in a range of lofts...just like they've been doing.

Something like 17 shafts at no upcharge, which I thought was awesome. Same price point too.

[eddiebigeddie]

Are the new forged tec black still?

[QuigleyDU]

> @Yacuone said:

> > @QuigleyDU said:

> > > @Yacuone said:

> > > Just seen all the new stuff with our rep. Everything looks really, really solid.

> > >

> > > The Xtreme will have a higher MOI than anything out right now. The other speedzone still has the front and back weights. 2 colorways. The full milled face wraps around and doesn't look bad at address at all. Fairways look clean. Slight improvement all around.

> > > The new Forged Tec piqued my interest. Foam filled and look real good imo.

> >

> > so no speedzone tour?

>

> No. Just the 2 heads in a range of lofts...just like they've been doing.

> Something like 17 shafts at no upcharge, which I thought was awesome. Same price point too.

 

Well, this year there was just one head. The shaft thing is interesting. I wonder which ones.

[Yacuone]

> @eddiebigeddie said:

> Are the new forged tec black still?

 

They are not. Not yet anyway.

 

Oh another thing. The new Speedzone irons have a carbon fiber topline. It's....unique. I didn't hate it, but it's certainly different.

[Mr. Grumpy]

News on One Length?

[Gary Gutful]

> @Yacuone said:

> > @eddiebigeddie said:

> > Are the new forged tec black still?

>

> They are not. Not yet anyway.

>

> Oh another thing. The new Speedzone irons have a carbon fiber topline. It's....unique. I didn't hate it, but it's certainly different.

 

> @Yacuone said:

> > @eddiebigeddie said:

> > Are the new forged tec black still?

>

> They are not. Not yet anyway.

>

> Oh another thing. The new Speedzone irons have a carbon fiber topline. It's....unique. I didn't hate it, but it's certainly different.

 

Carbon fibre top line? Got to hand it to Cobra, they definitely aren't boring!

[GC70]

> @Yacuone said:

> > @QuigleyDU said:

> > > @Yacuone said:

> > > Just seen all the new stuff with our rep. Everything looks really, really solid.

> > >

> > > The Xtreme will have a higher MOI than anything out right now. The other speedzone still has the front and back weights. 2 colorways. The full milled face wraps around and doesn't look bad at address at all. Fairways look clean. Slight improvement all around.

> > > The new Forged Tec piqued my interest. Foam filled and look real good imo.

> >

> > so no speedzone tour?

>

> No. Just the 2 heads in a range of lofts...just like they've been doing.

> Something like 17 shafts at no upcharge, which I thought was awesome. Same price point too.

 

I’m assuming Atmos and ? I really want to hear more about the forged Tec irons

[Taylor59]

Saw it in person two days ago... the face is much more square at address then the F9. They have added yellow crown graphics similar to the M5/6 . The milling does wrap around the face and the distinction between carbon fiber and the the face is very noticeable unlike the F9. Also they change the alignment aid... it is now the small snake with the C inside the square instead of just the snake. The F9 is much nicer to look at anyways...

[QuigleyDU]

> @Taylor59 said:

> Saw it in person two days ago... the face is much more square at address then the F9. They have added yellow crown graphics similar to the M5/6 . The milling does wrap around the face and the distinction between carbon fiber and the the face is very noticeable unlike the F9. Also they change the alignment aid... it is now the small snake with the C inside the square instead of just the snake. The F9 is much nicer to look at anyways...

 

Yellow on top?? Gross. Where is all this yellow coming from with them.