TP Mills - Post your Putter

[MattM97]

1 hour ago, MattGolfs said:

Got some work done to my girl

 

 

I told you to do the flow neck way back 🤣🤣 it is the superior neck. 

 

Is David doing the work or someone else? 

[MattGolfs]

53 minutes ago, MattM97 said:

 

I told you to do the flow neck way back 🤣🤣 it is the superior neck. 

 

Is David doing the work or someone else? 

I tried to like the swan plumbers neck but knew deep down i wanted it to be totally facebalanced and I knew i had to go with the flo  I ended up sending it to Josey over at Mack Made since his welds look so clean and he was amazing to work with! It’s like getting a new putter all over again 🤣

Edited April 20, 2022 by MattGolfs

[jonradus]

[jonradus]

First round of the season, and first time trying out this carbon flowneck softtail. 30 putts; 2 of those putts that I counted were well off the green (even actually made one of them); made three 10+ foot “bomb” putts for big par saves. Also made all but one big bender putt inside 5 feet. Very promising here…

[MattGolfs]

11 hours ago, jonradus said:

First round of the season, and first time trying out this carbon flowneck softtail. 30 putts; 2 of those putts that I counted were well off the green (even actually made one of them); made three 10+ foot “bomb” putts for big par saves. Also made all but one big bender putt inside 5 feet. Very promising here…

I LOVE half shaft offset. That’s what I had my flowneck made at

[MasstercraftCG]

Just finished this one.  Selling it because I currently game a Mizuno TPM 3 that I love.  Although I am working on a Mizuno TPM 1 and that is probably my favorite design of all time.

[RedWings1]

3 hours ago, dmgiffen said:

I ended up buying the Ming from @RedWings1. Great guy to deal with. Very happy with the putter.

 

 

 

 Thanks @dmgiffen! Very Nice Mills Dale you have there! Hope the Ming is awesome for ya!

[LionGolfer]

On 4/29/2022 at 11:09 PM, dmgiffen said:

I ended up buying the Ming from @RedWings1. Great guy to deal with. Very happy with the putter.

 

 

 

Looks really really nice. What finish is that? 

[Cactus Jack]

Here's my first TP Mills...not my last!

 

I was turned onto TP Mills by Lamont Mann. One day, we talked, and he had high praise for the Mills crew. I got curious, stumbled across this "Club Champ," and pulled the trigger. To learn more about this model I traded a few emails with David. His replies were lightning quick. He seems like a very nice guy.

 

While this particular putter is a bit busy for my tastes, man, it does roll the ball well. 

 

[jonradus]

15 hours ago, Cactus Jack said:

Here's my first TP Mills...not my last!

 

I was turned onto TP Mills by Lamont Mann. One day, we talked, and he had high praise for the Mills crew. I got curious, stumbled across this "Club Champ," and pulled the trigger. To learn more about this model I traded a few emails with David. His replies were lightning quick. He seems like a very nice guy.

 

While this particular putter is a bit busy for my tastes, man, it does roll the ball well. 

 

I owned one of these “100” pieces a while back and it was awesome. I sold it, but I always regretted it. It really does feel very nice, as of course all Mills putters do…

 

Was this one a prototype or something? The one I had said “100” in the cavity and the bumpers weren’t stamped. Other than those features, they are exactly the same. 

[Cactus Jack]

54 minutes ago, jonradus said:

I owned one of these “100” pieces a while back and it was awesome. I sold it, but I always regretted it. It really does feel very nice, as of course all Mills putters do…

 

Was this one a prototype or something? The one I had said “100” in the cavity and the bumpers weren’t stamped. Other than those features, they are exactly the same. 

 

I noticed it didn't have the number stamping in the cavity and shot David pics to confirm it was legit. Not only is it legit, as stamped on the bumpers it's "Custom Crafted," and a one-off piece produced outside of the normal production run. He didn't use "prototype" language so I won't either, but it's fair to say there likely isn't another one like this out in the wild.  

[Kaexo]

Does anyone own or know who owns this Fleetwood? It was sold last year on WRX. I will pay good money for it if someone wants to sale it.

[rt301]

Just got this back from David. Sent it in for some pampering .

Now it’s ready for the course. The light face milling added by David is perfect.

[jonradus]

Do you like my AZECK deck board style?

[hwwong]

On 5/16/2022 at 5:58 PM, jonradus said:

Do you like my AZECK deck board style?

 

Ahh you beat me to that one!!  Beauty and a great pick up.

[RedWings1]

On 5/12/2022 at 9:28 AM, Kaexo said:

Does anyone own or know who owns this Fleetwood? It was sold last year on WRX. I will pay good money for it if someone wants to sale it.

IIRC that Mills Fleetwood belonged to @RichieHunt ?
It's a nice one for sure!

[RichieHunt]

6 hours ago, RedWings1 said:

IIRC that Mills Fleetwood belonged to @RichieHunt ?
It's a nice one for sure!

 

Not me.  I had a Ming and sold it a while ago.

 

 

 

 

 

RH

[jonradus]

Check out the finish and wood grain on my dining room table.

 

[5hort5tuff]

That cover...with a mini cover is 🔥 

[rt301]

7 hours ago, jonradus said:

Check out the finish and wood grain on my dining room table.

 

Soooooooo.

How much for the table ???

😂

 

 

 

 

[jonradus]

8 hours ago, rt301 said:

15 hours ago, jonradus said:

Check out the finish and wood grain on my dining room table.

 

Soooooooo.

How much for the table ???

😂

 

 

 

 

 

Expand  

The table cost WAY more than the putter. Funny thing though…the putter is definitely worth more than the table now.

Many years ago, we tried to sell our old table and matching cabinet for $100 on Craig’s List before we bought this one. We had the strangest people coming over to browse; apparently it was “overpriced” at $100 because no one wanted it. We ended up giving them away to make them disappear, which was even hard to do…I never used Craig’s List again. 

[jonradus]

In case you also wanted to see what the downstairs flooring (in the kitchen, dining room, office, and hallway) looks like…here it is. 
 

[sm_watts]

47 minutes ago, jonradus said:

In case you also wanted to see what the downstairs flooring (in the kitchen, dining room, office, and hallway) looks like…here it is. 
 

I'm a little curious what you've done with the kitchen cabinets...

[jonradus]

19 minutes ago, sm_watts said:

I'm a little curious what you've done with the kitchen cabinets...

We had the kitchen redone years ago. This is what one of the cabinets looks like.

[jonradus]

[hwwong]

On 5/20/2022 at 1:30 PM, jonradus said:

In case you also wanted to see what the downstairs flooring (in the kitchen, dining room, office, and hallway) looks like…here it is. 
 

 

 

Flat T might be my new favorite Mills shape

[jonradus]

9 hours ago, hwwong said:

 

 

Flat T might be my new favorite Mills shape

It’s definitely awesome. This one is going to be tough to take out on the course because It’s the mintest Mills piece I’ve ever seen in person. I’ll make it happen this season though and snap a couple green photos. Here’s are side-by-sides of this and two of my others.  
 

[hwwong]

57 minutes ago, jonradus said:

It’s definitely awesome. This one is going to be tough to take out on the course because It’s the mintest Mills piece I’ve ever seen in person. I’ll make it happen this season though and snap a couple green photos. Here’s are side-by-sides of this and two of my others.  
 

very nice sir!!

[Bob Cat]

[newportbeach]

4 hours ago, jonradus said:

It’s definitely awesome. This one is going to be tough to take out on the course because It’s the mintest Mills piece I’ve ever seen in person. I’ll make it happen this season though and snap a couple green photos. Here’s are side-by-sides of this and two of my others.  
 

 

Great pictures thanks! I also really like that Flat T. Haven't had a Mills in a long long time. May have to do some hunting for one now.