Post a Pic of Your Latest Purchase.......

[cjblake09]

Nothing special but not getting a long with my Ping G400 3 wood off the deck so i went with this and man it is awesome. Put it at a C1 setting with a fade weight and the stock Diamana 80 stiff shaft and i am hitting it a ton better and only about 10 yards shorter off the tee. For those struggling with a 3 wood try a 5 and change the setting to make it a 4 wood.

[Nixhex524]

Picked up these beauties a week or so ago. Along with some Vokey Wedges (50*/8 F Grind and a 56*/10 S Grind)

 

Would love to hear what you think of these irons when you get some time in with them... beauties!

[JoeJoeJoeUrBoat]

 

 

Just managed to buy one of these! Was refreshing the page and ordered right away, in 2 minutes they sold out. What a gold mine!!! I think only 300 made.

[alnkal]

Just got delivered

This makes 3 MP650 drivers

8.5, 9.5 & 10.5

[bharp77]

Currently trying a C6 Red shaft with this.

[BearQ]

Currently trying a C6 Red shaft with this.

 

Provide the head specs if you have em :)

Flat lie angle???

[bharp77]

Currently trying a C6 Red shaft with this.

 

Provide the head specs if you have em :)

Flat lie angle???

[Triple Putt]

Just got delivered

This makes 3 MP650 drivers

8.5, 9.5 & 10.5

I’ll take the 9.5 lol

[Mike_C]

Just picked up set of Z945, PX 5.5, at least 9/10 condition or better. Paid $250. Not sure to keep the PX and wait to see if my elbows improve, or just go ahead and reshaft with Recoils. This pic is not mine, but mine are in as good as or better condition.

[RayGorman]

Picked up these beauties a week or so ago. Along with some Vokey Wedges (50*/8 F Grind and a 56*/10 S Grind)

 

Would love to hear what you think of these irons when you get some time in with them... beauties!

 

Tomorrow is their first day on the course. Been doing range work with them to dial them in a bit. The heads are about 90% smaller than previous clubs so margin is a bit smaller. But it will help me concentrate a bit more. Not a lot of 'corrections' on mishits. these are definitely NOT SGI clubs... but when they're on the sweetspot... Like buttah...

[NixLix26]

Just picked up set of Z945, PX 5.5, at least 9/10 condition or better. Paid $250. Not sure to keep the PX and wait to see if my elbows improve, or just go ahead and reshaft with Recoils. This pic is not mine, but mine are in as good as or better condition.

A full set? What a steal. Great clubs

[C_rad]

Just picked up set of Z945, PX 5.5, at least 9/10 condition or better. Paid $250. Not sure to keep the PX and wait to see if my elbows improve, or just go ahead and reshaft with Recoils. This pic is not mine, but mine are in as good as or better condition.

that is litteraly a steal. Would have bought with no hesitation

[Mike_C]

Just picked up set of Z945, PX 5.5, at least 9/10 condition or better. Paid $250. Not sure to keep the PX and wait to see if my elbows improve, or just go ahead and reshaft with Recoils. This pic is not mine, but mine are in as good as or better condition.

that is litteraly a steal. Would have bought with no hesitation

 

That is what I thought, 4-PW at that price is a steal, almost thought of buying them just to flip them, but they are so pretty. I hit them for the first time on the range last night, clearly not a GI iron, but oh so buttery on most hits, even with the PX shaft. I think I would love them with recoil protos, I am just hesitating because of the cost....

[FirePro]

Just picked up set of Z945, PX 5.5, at least 9/10 condition or better. Paid $250. Not sure to keep the PX and wait to see if my elbows improve, or just go ahead and reshaft with Recoils. This pic is not mine, but mine are in as good as or better condition.

that is litteraly a steal. Would have bought with no hesitation

 

That is what I thought, 4-PW at that price is a steal, almost thought of buying them just to flip them, but they are so pretty. I hit them for the first time on the range last night, clearly not a GI iron, but oh so buttery on most hits, even with the PX shaft. I think I would love them with recoil protos, I am just hesitating because of the cost....

im glad I didn't see these ha would have probably picked up to see about blending into my 745's

[jonn443]

Picked up these beauties a week or so ago. Along with some Vokey Wedges (50*/8 F Grind and a 56*/10 S Grind)

 

Would love to hear what you think of these irons when you get some time in with them... beauties!

 

Tomorrow is their first day on the course. Been doing range work with them to dial them in a bit. The heads are about 90% smaller than previous clubs so margin is a bit smaller. But it will help me concentrate a bit more. Not a lot of 'corrections' on mishits. these are definitely NOT SGI clubs... but when they're on the sweetspot... Like buttah...

 

90% smaller is a very large difference... Did you mean 10% smaller???

[Nateshot]

Will be assembling these tomorrow and will take them out for a test drive on Sunday. Not sure the pictures do them justice.

[cliffhanger]

Those are ridiculous man... enjoy those bad boys!!

[craz-e]

Will be assembling these tomorrow and will take them out for a test drive on Sunday. Not sure the pictures do them justice.

 

So pretty!

[cliffhanger]

My new Cameron

[johngalt312]

Brunswick The Only Green Maxwell - Espresso

 

 

Real Feel Country Club Elite Golf Mat - 5x5

 

 

Rukket Haack Pro Golf Net

 

 

Come on shipping...

[Sir edward of putternut]

second time getting a set of these...sold the first ones before even hitting them (long Canadian winters). Can't wait to get them next week .

 

well those look buttery and amazing! If you want to make a second mistake and sell them, let me know!

lol..thx for the offer. They look better than expected. nice milling marks on all the faces.

 

Nice! I just bought a set too!

Ive been gaming these off and on all summer. Just imcredible

[9woodfan]

Just grabbed this little monster and so far it's been very very nice. This shaft and head seem to go nicely together. I love 7 woods but I honestly just wanted to try this based on the Heavenwood name alone!

 

 

 

[BearQ]

Just grabbed this little monster and so far it's been very very nice. This shaft and head seem to go nicely together. I love 7 woods but I honestly just wanted to try this based on the Heavenwood name alone!

 

 

 

 

cant like, username says 9wood

[Radeon962]

TaylorMade p790 and Ping Stealth 56 & 60.

 

 

[Makuakane_Bear]

 

 

 

Newest addition to the bag. Literally have been going into various shops trying this club out to make sure it was worth my money. Got fitted and I can verify that it fits my stroke perfectly. Really excited about this club.

[RangerV]

I originally had the TM M1 driver and upgraded the shaft. Having an extra shaft available, I found a good deal on a new M3 driver head which I put my UST Mamiya Chrome Elements shaft on it. This is one amazing driving. My best drives of the day came off the toe. Carried my normal distance but came off the club straight as an arrow. Gotta love that TwistFace.

 

Went from the original M1 to this exact setup with the weights in the same placement. Bomber

[Patheba]

 

 

 

Just got the Mizuno MP18 SC which replaced TaylorMade 770.

[orangeology]

#3 19º head #inbound

 

[jwhite86]

So I've already got 2 V-Steels in reserve... I almost didn't jump on this in BST...

 

 

But then I saw this...

 

 

And I knew I had to have it

[RayGorman]

Picked up these beauties a week or so ago. Along with some Vokey Wedges (50*/8 F Grind and a 56*/10 S Grind)

 

Would love to hear what you think of these irons when you get some time in with them... beauties!

 

Tomorrow is their first day on the course. Been doing range work with them to dial them in a bit. The heads are about 90% smaller than previous clubs so margin is a bit smaller. But it will help me concentrate a bit more. Not a lot of 'corrections' on mishits. these are definitely NOT SGI clubs... but when they're on the sweetspot... Like buttah...

 

90% smaller is a very large difference... Did you mean 10% smaller???

 

 

Umm.... yes... I guess I meant they are 90% the size.. which would be 10% smaller... <rolling eyes>