New PXG prototype driver

1252628303139

Comments

  • JTD0314JTD0314 Members Posts: 443 ✭✭
    I really like my G400 Max 10.5 with ADTP 6x so I am thinking the XF will work for me.
  • scottvw13scottvw13 VaporWRX!! Members Posts: 2,168 ✭✭
    Barracuda wrote:

    JTD0314 wrote:
    BirdieBob wrote:

    getair23 wrote:


    How much different do the X and XF look at address?






    The XF is a bit longer...…...here is a pic...XF on the right. Biggest difference is the sole weights.







    Anyone know the difference in spin between the two?
    About 450rpm




    Thats precisely the difference in spin i say in my fitting.
  • JTD0314JTD0314 Members Posts: 443 ✭✭
    Is the XF draw bias or similar to the G400 Max.
  • Deuce78Deuce78 Members Posts: 1,243 ✭✭
    It's supposed to be slightly draw, but you have some play with the weight settings and if you open the face and go lower loft, and flatter lie to make it straight bias.



    Also just a note as far as looks the XF was slightly larger footprint than X, but the ping g max looks huge, and the XF did not look as huge as the ping to me. (I know they are all 460cc)
    TM M5 [email protected] HZRDUS T1100 65g 6.5
    PING G410 [email protected] HZRDUS T1100 75g 6.5 
    PING G410 17.5 HZRDUS T1100 85g 6.5
    Nike vapor fly pro 2 iron black tie 105x
    MP32/712mb/MP69/714mb/MP4/s55/900 Tour/iblade/5-7-965 combo/MP63/iblade 3-PW
    Vokey sm6/Tour Gorge/TVD/black Glides
    NIPPON 1150gh X flex/kbs tour V 120x/Steelfiber 125x
    Kuchar #1/Lamont Mann Custom ARM LOCK/custom Arm Locks-Scotty, Odyssey, TM
  • JTD0314JTD0314 Members Posts: 443 ✭✭
    Can anyone give some early comparisons between the XF and G400 Max? I am gaming and happy with a 10.5 G400 Max with AD TP 6x and will be replacing it with a Gen2. I am leaning towards the XF because of the forgiveness. I don’t need the low spin. Any input would be appreciated because I will be buying without hitting.
  • DLBTide7DLBTide7 Birmingham, ALMembers Posts: 114 ✭✭
    I just returned from my Gen2 fitting at PXG in Phoenix; 10.5 XF Driver, 3 metal and 17 degree hybrid. For those who have not hit the 3 metal or hybrid, you should do so- fantastic clubs.



    I hit both the X and XF extensively, with many different shafts. The XF should have a more similar profile to the Ping. With the right shaft, I was able to get my spin to 2400 range with the XF. The shafts do make a remarkable difference, so it you can get fit, I would encourage you to do so. If you are buying without hitting, the XF is closer to the Ping than the X, in my opinion.
    PXG Gen2 XF Driver
    PXG Gen2 X 3 metal
    PXG Gen2 17 degree hybrid
    PXG Gen2 XF Irons, 4-Gap
    PXG milled wedges, 56 and 60
    PXG Mustang putter
  • JTD0314JTD0314 Members Posts: 443 ✭✭
    What is your ss and what shaft worked best for you?
  • jcg132jcg132 PTPOTCW StamvegasMembers Posts: 1,042 ✭✭
    Fairway and hybrid were incredible on trackman today. The fairway was carrying at least 10-15 yards farther than my current gamer and the shaft isn’t even dialed in yet.
    Tour Issue Callaway Epic Sub Zero “L Stamp” 8° - Aldila Synergy Black Graphene Tour Proto 65 TX (44.5", D4)
    Tour Issue Callaway Epic Flash 15.5° - Graphite Design Tour AD DI 7 X (42.75", D6)
    Tour Issue Callaway Epic Hybrid 18° - Graphite Design Tour AD DI Hybrid 85 X (D4)
    PXG 0311 X Gen2 21.5° - Graphite Design Tour AD DI Hybrid 95 X (38.75", D4)
    PXG 0311 P Gen2 5-7 - Oban CT-115 Stiff (D4)
    PXG 0311 T Gen2 8-9 - Oban CT-115 Stiff (1.0° Strong, D4)
    PXG 0311 T Gen2 PW - Oban CT-115 Stiff (1.0° Strong, D5)
    Vokey SM7 Raw 49.11°F - Oban CT-115 Stiff (+0.25", 1.0° Flat, D5)
    Vokey SM7 Raw 54.10°S - Oban CT-115 Stiff (+0.25", 1.0° Flat, D5+)
    Vokey SM7 Raw 59.09°M - Oban CT-115 Stiff (+0.25", 1.0° Flat, D6)
    Scotty Cameron 009M Carbon - 34", 3.5°, 70°

    Titleist Pro V1x
    Golf Pride MCC Plus4
    FootJoy Pure Touch Limited
    Sun Mountain C130S
    Clicgear Model 8.0
  • DLBTide7DLBTide7 Birmingham, ALMembers Posts: 114 ✭✭
    edited Feb 10, 2019 6:58pm #820
    JTD0314 wrote:


    What is your ss and what shaft worked best for you?




    I am a little older. SS of approximately 95. Was fit into a Blue Evenflow
    Post edited by Unknown User on
    PXG Gen2 XF Driver
    PXG Gen2 X 3 metal
    PXG Gen2 17 degree hybrid
    PXG Gen2 XF Irons, 4-Gap
    PXG milled wedges, 56 and 60
    PXG Mustang putter
  • Deuce78Deuce78 Members Posts: 1,243 ✭✭
    jcg132 wrote:
    Fairway and hybrid were incredible on trackman today. The fairway was carrying at least 10-15 yards farther than my current gamer and the shaft isn’t even dialed in yet.


    What was your set up? Weights and shaft and loft?
    TM M5 [email protected] HZRDUS T1100 65g 6.5
    PING G410 [email protected] HZRDUS T1100 75g 6.5 
    PING G410 17.5 HZRDUS T1100 85g 6.5
    Nike vapor fly pro 2 iron black tie 105x
    MP32/712mb/MP69/714mb/MP4/s55/900 Tour/iblade/5-7-965 combo/MP63/iblade 3-PW
    Vokey sm6/Tour Gorge/TVD/black Glides
    NIPPON 1150gh X flex/kbs tour V 120x/Steelfiber 125x
    Kuchar #1/Lamont Mann Custom ARM LOCK/custom Arm Locks-Scotty, Odyssey, TM
  • jcg132jcg132 PTPOTCW StamvegasMembers Posts: 1,042 ✭✭
    Deuce78 wrote:
    jcg132 wrote:
    Fairway and hybrid were incredible on trackman today. The fairway was carrying at least 10-15 yards farther than my current gamer and the shaft isn’t even dialed in yet.


    What was your set up? Weights and shaft and loft?




    3 wood ended up lofting up to 16.5 to get more carry. 2XKV 70 stiff blue for now , soon to be replaced by the 2019 ATX tour blue 70TX. 42.5”, all heavy weights besides 2 which were in the front middle and soon to be replaced by the heavier weights as well. D5.5 currently. This will be insane with a real shaft in it.



    3 hybrid. 19 degrees. AD DI 85 stiff. 40”. Same weight situation as above. D4.5 currently. This is dialed in.
    Tour Issue Callaway Epic Sub Zero “L Stamp” 8° - Aldila Synergy Black Graphene Tour Proto 65 TX (44.5", D4)
    Tour Issue Callaway Epic Flash 15.5° - Graphite Design Tour AD DI 7 X (42.75", D6)
    Tour Issue Callaway Epic Hybrid 18° - Graphite Design Tour AD DI Hybrid 85 X (D4)
    PXG 0311 X Gen2 21.5° - Graphite Design Tour AD DI Hybrid 95 X (38.75", D4)
    PXG 0311 P Gen2 5-7 - Oban CT-115 Stiff (D4)
    PXG 0311 T Gen2 8-9 - Oban CT-115 Stiff (1.0° Strong, D4)
    PXG 0311 T Gen2 PW - Oban CT-115 Stiff (1.0° Strong, D5)
    Vokey SM7 Raw 49.11°F - Oban CT-115 Stiff (+0.25", 1.0° Flat, D5)
    Vokey SM7 Raw 54.10°S - Oban CT-115 Stiff (+0.25", 1.0° Flat, D5+)
    Vokey SM7 Raw 59.09°M - Oban CT-115 Stiff (+0.25", 1.0° Flat, D6)
    Scotty Cameron 009M Carbon - 34", 3.5°, 70°

    Titleist Pro V1x
    Golf Pride MCC Plus4
    FootJoy Pure Touch Limited
    Sun Mountain C130S
    Clicgear Model 8.0
  • LionGolferLionGolfer Members Posts: 1,301 ✭✭
    DLBTide7 wrote:

    JTD0314 wrote:


    What is your ss and what shaft worked best for you?




    I am a little older. SS of approximately 95. Was fit into a Blue Evenflow




    My ss is about yours. Did you try the X and if so in what loft? Too low spin?
    Drivers : Crazy435COAAngel5-GTD455Crazy9-ItoboriCrazy9Dia-ProceedIXCOABurningAngel
    UTs : Itobori-ModartMA01H-ProceedTi-PXG 317
    Irons : GrindStudioProto-ModartCBC-PXG311T-RoddioMeisterM
    Wedges : GrindStudio-Modart-Orion
    Putters : ArGolf-Benock-BPutters-Kitada-Machine-Masda-Nead-PXG-Slighter-Xenon
  • DLBTide7DLBTide7 Birmingham, ALMembers Posts: 114 ✭✭
    edited Feb 10, 2019 10:53pm #824
    LionGolfer wrote:

    DLBTide7 wrote:

    JTD0314 wrote:


    What is your ss and what shaft worked best for you?




    I am a little older. SS of approximately 95. Was fit into a Blue Evenflow




    My ss is about yours. Did you try the X and if so in what loft? Too low spin?


    I hit both (in a 10.5) extensively. I was actually a little longer (5 yds) with the X, but more more accurate with the XF. I have a Gen1 XF and I like the head profile. Gen2 XF is 15 yards longer than Gen1.



    I was able to dial in spin at 2410. We were using Pro V1s. Carry was at 243, rolling out to 267
    Post edited by Unknown User on
    PXG Gen2 XF Driver
    PXG Gen2 X 3 metal
    PXG Gen2 17 degree hybrid
    PXG Gen2 XF Irons, 4-Gap
    PXG milled wedges, 56 and 60
    PXG Mustang putter
  • stk123stk123 Members Posts: 446 ✭✭
    DLBTide7 wrote:

    LionGolfer wrote:

    DLBTide7 wrote:

    JTD0314 wrote:


    What is your ss and what shaft worked best for you?




    I am a little older. SS of approximately 95. Was fit into a Blue Evenflow




    My ss is about yours. Did you try the X and if so in what loft? Too low spin?


    I hit both (in a 10.5) extensively. I was actually a little longer (5 yds) with the X, but more more accurate with the XF. I have a Gen1 XF and I like the head profile. Gen2 XF is 15 yards longer than Gen1.



    I was able to dial in spin at 2410. We were using Pro V1s. Carry was at 243, rolling out to 267




    When you say Gen 2 is 15y longer, did you get a chance to hit them side by side?



    Reason I ask is because you claim 95mph speed and 243y carry. Since you are in Louisiana closer to sea level than mountains, the launch monitor was probably jacked up a little.



    I don't think you can get 243y carry with 95mph swing speed. At least not as an average. When I was swinging 100mph last year, my best shots would barely carry 240 on trackman in fitting (similar on course in real life).
  • DLBTide7DLBTide7 Birmingham, ALMembers Posts: 114 ✭✭
    stk123 wrote:

    DLBTide7 wrote:

    LionGolfer wrote:

    DLBTide7 wrote:

    JTD0314 wrote:


    What is your ss and what shaft worked best for you?




    I am a little older. SS of approximately 95. Was fit into a Blue Evenflow




    My ss is about yours. Did you try the X and if so in what loft? Too low spin?


    I hit both (in a 10.5) extensively. I was actually a little longer (5 yds) with the X, but more more accurate with the XF. I have a Gen1 XF and I like the head profile. Gen2 XF is 15 yards longer than Gen1.



    I was able to dial in spin at 2410. We were using Pro V1s. Carry was at 243, rolling out to 267




    When you say Gen 2 is 15y longer, did you get a chance to hit them side by side?



    Reason I ask is because you claim 95mph speed and 243y carry. Since you are in Louisiana closer to sea level than mountains, the launch monitor was probably jacked up a little.



    I don't think you can get 243y carry with 95mph swing speed. At least not as an average. When I was swinging 100mph last year, my best shots would barely carry 240 on trackman in fitting (similar on course in real life).




    It was indoors at PXG’s headquarters in Phoenix. I can only give you the numbers they presented me. I optimized the attack angle (5 for me) and loft at impact (15 for me).



    I was answering questions on the fitting; I am not interested in debating what the numbers showed. And yes, I am in a current Gen1 XF that was originally fitted at my PXG Xperience and hit them side by side.
    PXG Gen2 XF Driver
    PXG Gen2 X 3 metal
    PXG Gen2 17 degree hybrid
    PXG Gen2 XF Irons, 4-Gap
    PXG milled wedges, 56 and 60
    PXG Mustang putter
  • BirdieBobBirdieBob PXG Members Posts: 4,055 ✭✭
    New PXG GEN 2 0811X Driver, 0341X 2 Wood, and 0341X 5 Wood



    Pics of the top and frontal views



    Fairways are medium size with medium face profile. Looks like great for off the deck!





    WITB....GOLF EQUIPMENT MATTERS
    PXG 0811X Gen2, 10.5* (9.5*), JDM Limited Edition 2016 Basileus AAA 60X
    PXG 0341X Gen2, 13* (14.5*), Tensei Pro Blue 70TX
    PXG 0341X Gen2, 18* (17.0*), Tensei Pro White 80TX
    PXG 0317X Gen2, 19* (20.0*), Tensei Pro White HY 100X
    PXG 0311X Gen2, Extreme Dark, #2 DI, KBS TGI 100 X
    PXG 0311X Gen2, Extreme Dark, #4 & #5 DI, LE DG TI AMT x100 ONYX
    PXG 0311P Gen2, Extreme Dark, 6 - P Irons, LE DG TI AMT x100 ONYX
    PXG 0311T 50* Milled Sugar Daddy Extreme Dark, LE DG TI AMT x100 ONYX
    PXG 0311T 55* & 60* Milled Darkness Wedges, DG TI s400 ONYX
    SCOTTY Cameron Custom "Murdered Out" Select Newport M2 Putter, w/SC Black CircleT HC
    PXG Limited Edition Darkness Hybrid Stand Bag
    PXG Limited Edition Darkness Umbrella
    STEWART Golf X9 FOLLOW Electric Cart, Darkness model

  • LionGolferLionGolfer Members Posts: 1,301 ✭✭
    Great pics. Thanks
    Drivers : Crazy435COAAngel5-GTD455Crazy9-ItoboriCrazy9Dia-ProceedIXCOABurningAngel
    UTs : Itobori-ModartMA01H-ProceedTi-PXG 317
    Irons : GrindStudioProto-ModartCBC-PXG311T-RoddioMeisterM
    Wedges : GrindStudio-Modart-Orion
    Putters : ArGolf-Benock-BPutters-Kitada-Machine-Masda-Nead-PXG-Slighter-Xenon
  • Deuce78Deuce78 Members Posts: 1,243 ✭✭
    Get some shafts in those and go hit! My driver is still in production. I heard they may be sold out, anyone confirm that?
    TM M5 [email protected] HZRDUS T1100 65g 6.5
    PING G410 [email protected] HZRDUS T1100 75g 6.5 
    PING G410 17.5 HZRDUS T1100 85g 6.5
    Nike vapor fly pro 2 iron black tie 105x
    MP32/712mb/MP69/714mb/MP4/s55/900 Tour/iblade/5-7-965 combo/MP63/iblade 3-PW
    Vokey sm6/Tour Gorge/TVD/black Glides
    NIPPON 1150gh X flex/kbs tour V 120x/Steelfiber 125x
    Kuchar #1/Lamont Mann Custom ARM LOCK/custom Arm Locks-Scotty, Odyssey, TM
  • 3wood3wood Members Posts: 408 ✭✭
    Deuce78 wrote:
    Get some shafts in those and go hit! My driver is still in production. I heard they may be sold out, anyone confirm that?


    Yes sir
  • stk123stk123 Members Posts: 446 ✭✭
    Deuce78 wrote:


    Get some shafts in those and go hit! My driver is still in production. I heard they may be sold out, anyone confirm that?




    I ordered mine 2 weeks ago via club champion and still haven't gotten it. It doesn't sound like it shipped yet either.



    Boooooo!!!
  • Matt HigginsMatt Higgins Nedderto Members Posts: 102 ✭✭
    At my fitting on Friday, I was told that if I am to order anything, the 10.5* 0811X is currently in very low supply, the 9* is sold out completely. I did not ask about the current time to order but it seems that no one expected them to be this good - on this basis, whilst I am prevaricating as to whether to buy just the driver or a whole top end driver/3 wood/19* hybrid ensemble, if people could just stop demoing them for a while it would be much appreciated. Thank you!!
  • snagy2000snagy2000 Members Posts: 1,573 ✭✭
    3wood wrote:

    Deuce78 wrote:
    Get some shafts in those and go hit! My driver is still in production. I heard they may be sold out, anyone confirm that?


    Yes sir




    #KaboomBaby
  • Dr.JPDr.JP Members Posts: 457 ✭✭
    Been waiting a week for mine to ship. My fitter just told me it’s going to be another 3 weeks before I get the driver. That they underestimated the demand. And have to make more. Does this seem short sighted or is it me? Extremely frustrating
  • GoGoErkyGoGoErky Members Posts: 1,141 ✭✭
    Dr.JP wrote:


    Been waiting a week for mine to ship. My fitter just told me it’s going to be another 3 weeks before I get the driver. That they underestimated the demand. And have to make more. Does this seem short sighted or is it me? Extremely frustrating




    It happens with every company around new hot releases
  • cardinal22cardinal22 San Carlos, CAMembers Posts: 70 ✭✭
    Ordered my 10.5 811X Jan 28 and received it today. Must have just got in under the wire.
  • stk123stk123 Members Posts: 446 ✭✭
    edited Feb 12, 2019 6:29am #837
    I have ordered mine exactly 2 weeks ago and still waiting. The 10.5 is still available so you can still order those and get it relatively quickly. Only 9x is out of stock
  • davo32683davo32683 Members Posts: 2,097 ✭✭
    Well. Even though I'm more than pleased with my F9, I gave in and ordered the PXG.



    0811XF 9* with Pro Orange 60TX
    Cobra F9 Avalanche 8° Accra TZ6 65 M5
    Titleist TS3 15° 3 Wood Evenflow White 75 6.5
    Bridgestone J15 CB 4-PW KBS $ Taper 125
    Titleist SM7 Raw 50° Tour Issue X100
    Titleist Oil Can Wedgeworks V Grind 54°
    TaylorMade Hi Toe 60°
    Evnroll ER5B
    Custom Torched Evnroll ER2
    Custom MannKrafted WB-XL Long Pipe Neck
  • scottvw13scottvw13 VaporWRX!! Members Posts: 2,168 ✭✭
    Spoke to PXG. As reported 9 degree X backordered. Heads not expected until Mid March.



    Not good.
  • jcg132jcg132 PTPOTCW StamvegasMembers Posts: 1,042 ✭✭
    davo32683 wrote:
    Well. Even though I'm more than pleased with my F9, I gave in and ordered the PXG.



    0811XF 9* with Pro Orange 60TX




    Let me know your thoughts - F9 has been great so far for me but also curious about the PXG.
    Tour Issue Callaway Epic Sub Zero “L Stamp” 8° - Aldila Synergy Black Graphene Tour Proto 65 TX (44.5", D4)
    Tour Issue Callaway Epic Flash 15.5° - Graphite Design Tour AD DI 7 X (42.75", D6)
    Tour Issue Callaway Epic Hybrid 18° - Graphite Design Tour AD DI Hybrid 85 X (D4)
    PXG 0311 X Gen2 21.5° - Graphite Design Tour AD DI Hybrid 95 X (38.75", D4)
    PXG 0311 P Gen2 5-7 - Oban CT-115 Stiff (D4)
    PXG 0311 T Gen2 8-9 - Oban CT-115 Stiff (1.0° Strong, D4)
    PXG 0311 T Gen2 PW - Oban CT-115 Stiff (1.0° Strong, D5)
    Vokey SM7 Raw 49.11°F - Oban CT-115 Stiff (+0.25", 1.0° Flat, D5)
    Vokey SM7 Raw 54.10°S - Oban CT-115 Stiff (+0.25", 1.0° Flat, D5+)
    Vokey SM7 Raw 59.09°M - Oban CT-115 Stiff (+0.25", 1.0° Flat, D6)
    Scotty Cameron 009M Carbon - 34", 3.5°, 70°

    Titleist Pro V1x
    Golf Pride MCC Plus4
    FootJoy Pure Touch Limited
    Sun Mountain C130S
    Clicgear Model 8.0
  • davo32683davo32683 Members Posts: 2,097 ✭✭
    jcg132 wrote:

    davo32683 wrote:
    Well. Even though I'm more than pleased with my F9, I gave in and ordered the PXG.



    0811XF 9* with Pro Orange 60TX




    Let me know your thoughts - F9 has been great so far for me but also curious about the PXG.




    I'll report back on here. Unfortunately I won't be able to give an apples to apples comparison with the same shaft, but I can provide some feedback for sure. The F9 is a speed monster, but the XF was idiot proof for me the day I tried it on the range. It just went straight and retained good ball speed no matter where I hit it on the face.
    Cobra F9 Avalanche 8° Accra TZ6 65 M5
    Titleist TS3 15° 3 Wood Evenflow White 75 6.5
    Bridgestone J15 CB 4-PW KBS $ Taper 125
    Titleist SM7 Raw 50° Tour Issue X100
    Titleist Oil Can Wedgeworks V Grind 54°
    TaylorMade Hi Toe 60°
    Evnroll ER5B
    Custom Torched Evnroll ER2
    Custom MannKrafted WB-XL Long Pipe Neck
Sign In or Register to comment.